Hey all hope you're all doing well i went to go for the jump to rom version 1.30 from rom 1.13 and it failed now all i get is serial/usb 1.00 you know where i cna get a unbrick exe? it would be great its the spv m5000 orange version but i dont care about the phone feature realy i just would like it to boot thanks guy's.
Related
Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly
Hey
I Have A Uni (SPV M5000) WM5, G3,WWE
Im trying to upgrade to WM6,Ive tried Serveral utilities,and roms, but most come up with an error,
most common Error 150, And Error 112, and now i cant get the device out of Bootloader mode as well (V1.01)
Pls Pls Pls Pls Help
Im Desperate for WM6 On My Uni
Thanks
Dear Friend,
I had the same issue with my UNI after I install the Ranju 7.6.
FOR EVERYONE: DONT GO BACK AFTER YOU INSTALL RANJU 7.6 Because only solution to unbrick your UNI is to go through very complex method of MTTY.
Here is a link how to unbrick your UNI http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader.
Do step by step and will work. before that dawnload some ROM that has all included: Radio, Extended ROm and the CE ROM. (be carefull on your brand as well as).
Good luck
also, four letters: RTFW (Read The F Wiki)!
And read the Readme.txt-s included with your ROM, they have all the error codes, meanings, and possible solutions for them. For the first time, these Readmes really are worthwhile
Hello, I have a HTC TyTn, and I am trying to upgrade it from wm 5.0 to wm 6.0, I have followed all the instructions, but it still dosent work, I think the problem is, that I dont have SPL-1.11, I have a lower one, PLEASE HELP ME!
This contains a lot of guides for Hermes:
http://forum.xda-developers.com/showthread.php?t=299462
This is a hard-spl thread by olipro.. you can follow the instructions there.
http://forum.xda-developers.com/showthread.php?t=296722
Thanks,Ill have a look!
if it is an official rom you won't need hard spl (just a heads up to save some time flashing)
It is original, but the htc eclub, dosent have any more upgrades for the htc tytn.
I did everything, but then it showed me
ERROR (260) : Update Error
The Update Utillity cannot connect to your PDA phone!
BUT MY PHONE WAS CONNECTED TO USB!!!!
PLEASE HELP ASAP!
When the multi tri thing appears, it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.07.ds
WHATS WRONG?
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks
my phone is stuck on smart mobility onbl 1.11.0000 spl 1.11.0001 gsm 03.15.90 os 1.11.0.0 .i was to try hard reset but its say format failed.and i lost my backup cd .how can i fix my phone.sorry for my english.plzz help
htc phar100 stuck plzz help
my phone is stuck on smart mobility onbl 1.11.0000 spl 1.11.0001 gsm 03.15.90 os 1.11.0.0 i was to try hard reset but its say format failed.and i lost my backup cd .how can i fix my phone.sorry for my english.plzz help
Hi there,
Easiest, quickest and safest way (for a beginner like you ) is to download an official rom and flash it.
You will need to put your device into bootloader to flash, but you should have no problems with this method.
Once its up and running, read the very good guides and understand the procedures before flashing again
Chow.
thanks but i dont have backup and i can get oficial rom from htc.plz help
Sorry i didnt understand you there fully. Did you say you cant get official download or dont want to flash it as you dont have a back up?
Here is the d/l link for official rom from HTC : http://www.htc.com/www/supportdownload.aspx?p_id=112&cat=2&dl_id=12
If you have you tried a hard reset and it did not work then nothing else will put your phone right as far as i can tell from the info you gave me. Your only alternative is flashing an official htc rom.
How did you get to this place, what did you do to ur device?
IN HTC SUPPORT I RESIVE THAT(Sorry, this software download is not suitable for your device)I AM FROM ENGLAND.HARD RESET NOT WORKING ITS SAYS (FORMAT FAILED)HOW CAN I GET PHONE WORK AGAIN.SORRY FOR MY ENGLISH
I DID BACKUP BUT I LOSTETSORRY FOR MY ENGLISH
Ok read this, it has link to official wwe rom : http://forum.xda-developers.com/showthread.php?t=458965&highlight=official+rom
ps : just a word of advice, if you had typed official rom in the pharos forum you would have found this quite quickly
Cheers.
If you run into anymore problems after reading the guides, let us know.. we might be able to help with the SPL stuff.