Database Info

Rare problem with an upgrade

Hi,
I tried to upgrade my Qtek S200 with the newest ROM release from PdaMobiz (the 16M pooling page one), but encountered some problems...
It's a Portuguese TMN Qtek (or at least it displays the operator logo when started), although the software is in English.
IPL is 2.09 and SPL is 2.15...
However, after upgrading it, it kept displaying the Operator logo with IPL and SPL, and freezed, so it never worked. When I tried to revert it, I wasn't able to do it, because every time I try to install a different ROM (all of them for the G3 device) it just installs the new ROM, and then goes to that screen and freezes...
It never gave me any error during the upgrading/downgrading, because when it checks the version of the ROM, it displays no information, so it just says that is going to replace the inexistant version with the new one...
Is there a step a missed (I didn't put it in bootloader mode before doing the first upgrade, but I had already done that before with other ROMs and it worked fine...)?
Now I'm stuck without knowing if I should have done an unlock CID before upgrading it, or if there is another steped I missed... Please help me out...
Thanks in advance,
Nuno

Tried this?
Read this in one of the threads and it solved his problem:
Extract the rom file you are using to flash your phone, to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility-NoVendorID.zip") into this folder. than connect your phone to pc and double click on "ROMUpdateUtility-NoVendorID.exe".
I personally have not tried it, but I downloaded the prog just in case, Hope it helps.

Now it gives me an error...
Hi,
Just tried what you advised, but now it jusk keeps giving me the error 208, which is supposed to happen because I have other programs open on my computer... Tried rebooting, closing most aplications with task manager, and still it doesn't work.
Also tried to downgrade to lower ROM upgrade, but it gives me the error that I can't downgrade, only upgrade...
When I upgrade it with AKU 2.3, it goes all the way through the upgrade, and then when it reboots, it just keeps giving me the operator logo screen with the version info on the display.
If I try to reboot to bootloader mode, I'm not able, the only way to do it is by removing the battery...
I'm probably still doing something I shouldn't... It should be able to work the downgrade utility...
Anyone can help?
Thanks,
Nuno

Try this rom:
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
It shoud be ok.
If your prophet has spl end up with 2.xx.0001 check at
ftp://xda:[email protected]/Uploads/Prophet/
find out the rom which can solve for SPL 2.xx.0001.
Good luck

Thanks Chan! Problem solved!
I was starting to review all my steps ir order to see what I could have done wrong...
Would you advise me to upgrade now to the PDAMobiz latest ROM (the one with the biggest pooling page)?
Thanks again.
Nuno

1. Unlock cid
Since your prophet spl is 2.15, you have to follow this step.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437
From file you can get from ftp://xda:[email protected]/Uploads/Prophet/
Your PC has to connect to network or internet (to have ip address), becuase in that script use ping command for delay 4 seconds.
It's just downgrade and unlock cid.
You may verify if cid unlocked, by backup rom to sd card. (use romupdate.exe with r2sd all command, check at wiki)
2. Upgrade to official rom
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. Upgade to pdamobiz, I suggest you to upgrade 12 Mb pagepool version. (even 8 mb version is ok). Because 16 mb has smallest ram space.
Good luck

All solved!
Again,
Thank you very much for your help!
After some tries, upgrading, downgrading, upgrading again, etc, I finally got it, so now its running the PDAMobiz version, which by the way, seems great so far!
Next time I'll come to you directly and then try to make things on my own...
Thanks again!
Nuno Eça

HARD SPL update Error

Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.

aditya4ibm said:
Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.
Click to expand...
Click to collapse
Try downgrading to your providers official 6.0(Orange/at&t/HTC) then hardSPL, i read somewhere it works better on WiMo 6.0.

Don't Work
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.

Have you downloaded the correct official ROM for your device?
aditya4ibm said:
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.
Click to expand...
Click to collapse

Doubt
How should i Know which is my correct ROM and from where i can download bcoz i hve downloaded from this website only but on HTC official website there is only 6.1 version not 6.0 so plz help me. I want this in English lang.

Having big problems please help!!!!!

Hello, I have a HTC TyTn, and I am trying to upgrade it from wm 5.0 to wm 6.0, I have followed all the instructions, but it still dosent work, I think the problem is, that I dont have SPL-1.11, I have a lower one, PLEASE HELP ME!

This contains a lot of guides for Hermes:
http://forum.xda-developers.com/showthread.php?t=299462
This is a hard-spl thread by olipro.. you can follow the instructions there.
http://forum.xda-developers.com/showthread.php?t=296722

Thanks,Ill have a look!

if it is an official rom you won't need hard spl (just a heads up to save some time flashing)

It is original, but the htc eclub, dosent have any more upgrades for the htc tytn.

I did everything, but then it showed me
ERROR (260) : Update Error
The Update Utillity cannot connect to your PDA phone!
BUT MY PHONE WAS CONNECTED TO USB!!!!
PLEASE HELP ASAP!

When the multi tri thing appears, it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.07.ds
WHATS WRONG?

i think my treo 750 is dead

Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know

You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.

similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks

how to flash wm6.5 rom in my htc s710

i need help to flash wm 6.5 rom i've downloaded from here
can anyone one tell me how to do it in simple steps?
i don't know anything about roms
i didn't do any upgrade to my htc s710 device before
last thing my device has sim protection (sim unlocked)
thanks

first:
follow steps here:
USPL
second: download the rom you wish to use and install it same way as you installed hardspl!
3. finish!

thank you hashtowent i did as u said
and i finally got wm6.5 in my vox
and thanks to everyone here on this forum
i learned alot here about my vox
thank you

Hi Hashtowent,
Any idea why I am still stuck with ERROR 270 only with the WM6.5 in my E650? (I also followed your links and suggestions)
THX
Ant

Hi,
I tried today to update my VOX in rom WM 6.5 but I have the same problem as Antanico...
Someone can help me ppllleeeaaasseeeeee ???
Many thanks

No ?? Pleasseeee
I tried to follow all steps in USPL guide but still the same....
I have for now the ROM WM 6.1 from LeFab47 alias Fireburned

Guys... I had the same problem in my new VOX...(didnt have this issue in the older one)....
Jockey was considerate enough to point the following to me...... Used it and everything was absolutely fine....No error 270 etc...
There is one alternative to application unlock your phone. To properly application unlock the phone perform the steps as suggested to me by another friendly customer:
1. go to
http://www.modaco.com/index.php?s=&s...dpost&p=825304
2.Run MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB on the device
3. Run MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device and
reboot.
This will solve your problem...if it doesnt....lemme know ..
thanxxx

Hi,
Many thanks for your answer but but but after run the 2.cab I still have the same result ;(
Whhhyyyyy mmeeeeeeeee !!!!
Just te be sure, i must follow steps in this order right ?
1°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
2°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device
3°) Restart
4°) Launch uspl_116_jockyw.bat
5°) Update ROM with "vox-USPL"
6°) Update ROM with custom ROM
???

after step 3...
try running the application unlock sda...
maybe will solve your problem
if it doesnt.....i will let you know another solution
thanx

.....same.....
Is it normal that at the end of step 4 I have the sceen with the tux after screen green, red,... and after nothing happend I must reboot the phone myself ??

All is OK nowwwwwww.
Like a newbie after step 4 I shut the phone instead of launch directly step 5.....
Thank you Indtram for your help

hi, i can't upgrade to windows mobile 6.5 because "error 270".
And when i launch the uspl, my vox shutdown and i restart it but nothing.
What have i to do?
thx

please read the complete thread and you will have the answer to ERROR 270....

hello
i have bougth a htc s710 which i wont to have a new windows on... wat most i do?. it is a risk?

It's no risk, do USPL as described in the sticky (or the Wiki) and then flash any ROM you want (for the S710 of course)

thank you very much
this was a good solution to this damn error
thank you very moch
Dr. Ahmed Zaher

Hi Mathitalia,
It is over 1 year from the issues we had.
Can you please tell me if your phone is working with Italian SIM cards?
Did you manage to SIM unlock it?
All the best,
Antanico