Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.
aditya4ibm said:
Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.
Click to expand...
Click to collapse
Try downgrading to your providers official 6.0(Orange/at&t/HTC) then hardSPL, i read somewhere it works better on WiMo 6.0.
Don't Work
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.
Have you downloaded the correct official ROM for your device?
aditya4ibm said:
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.
Click to expand...
Click to collapse
Doubt
How should i Know which is my correct ROM and from where i can download bcoz i hve downloaded from this website only but on HTC official website there is only 6.1 version not 6.0 so plz help me. I want this in English lang.
Related
Hello, i've read a lot..but a cannot find a clear way to go back to my original ROM (i need to repair my baby jamin but i need my original italian rom).
I've go a G3, and i've installed the ASERG rom releases. (so i've just used NVID)
Now I've try to downgrade to the original IMATE Italian rom but there's no way.
during ROm upgrade after 1% (white screen on the jamin):
"
ERROR[326]: INVALID COMMAND
THIS NBF file cannot be used fot your PDA pHONE PLease check you NBF file"
Any Idea?
I've see http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock ...and i've got PDAMobiz.com_ProphetAKU2_unlockCID.rar ...but I cannot understand why i've upgrade without any problems using NVID from 2.13 to 2.20 but i cannot go back...and i want to be sure that using PDAMobiz.com_ProphetAKU2_unlockCID.rar i'll solve my issue
lightman3dd said:
Hello, i've read a lot..but a cannot find a clear way to go back to my original ROM (i need to repair my baby jamin but i need my original italian rom).
I've go a G3, and i've installed the ASERG rom releases. (so i've just used NVID)
Now I've try to downgrade to the original IMATE Italian rom but there's no way.
during ROm upgrade after 1% (white screen on the jamin):
"
ERROR[326]: INVALID COMMAND
THIS NBF file cannot be used fot your PDA pHONE PLease check you NBF file"
Any Idea?
Click to expand...
Click to collapse
Once you've had an AKU2.2 or higher on your device, you won't be able to go back to your original (AKU2.1*) ROM, unless you CID-unlock your device. You have a G3, so you're lucky you can!
But to save yourself all the trouble, I recommend you just use a stable AKU2.2/2.3 ROM.
grtz
EDIT: The RUU (ROM Update Utility) of your original ROM checks CID (security) on installation.
Because you already used AKU2.2 or higher it will fail CID-check and stop it's setup.
lo0m said:
Once you've had an AKU2.2 or higher on your device, you won't be able to go back to your original (AKU2.1*) ROM, unless you CID-unlock your device. You have a G3, so you're lucky you can!
But to save yourself all the trouble, I recommend you just use a stable AKU2.2/2.3 ROM.
grtz
Click to expand...
Click to collapse
Thanks a lot, but i need to repair my device , so i need to install the original rom otherwise no gurantee...
When my baby will go back, for sure i'll reinstall Aserg AKU3
EDIT: Just CID_UNLOCKED and the downgrade works like a rocks...My baby can go to the doctor ;-)
having the same problem
i will try it today and tell you the result
but can you tell me where can i find the CID Unlock
i will use the same step used for the KJAM
fadimck said:
i will try it today and tell you the result
but can you tell me where can i find the CID Unlock
i will use the same step used for the KJAM
Click to expand...
Click to collapse
You could try here
http://files.pdamobiz.com/c/PDAMobiz.com_ProphetAKU2_unlockCID.rar
You can use this way I did it many times
To return to JAMin original rom :
1- Extract your JAMin original rom ( JAMin_Arabic_213923_2139126_022021_ship )or ( JAMin_WWE_213923_2139123_022021_ship )
on your Disk top you will get two folders ( OutputFile & RUU_TOOLS ).
2- Move (nk.nbf) from ( OutputFile ) to ( RUU_TOOLS \ Prophet \ WWE ) folder.
3- Now you have the all needed files on one folder (EnterBootloader&README & ROMUpdateUtility & RUUGetInfo & RUUResource.dll)
4- You need Prophet_G4_RadioRom ( Prophet_G4_RadioRom_v2.47.21) or ( Prophet_G3_G4_RadioRom_v2.61.21 ).
4- Chang the (ROMUpdateUtility) with ( ROMUpdateUtility_No_VenderID ).
5- put your JAMin on bootloader screen the ( coloured screen ).
6- Run the ( ROMUpdateUtility_No_VenderID ) it will start update the rom. It will hang on 95%.
7- Rest it to get the bootloader screen ( coloured screen ).
8- Run the Prophet_G4_RadioRom ( Prophet_G4_RadioRom_v2.47.21) or ( Prophet_G3_G4_RadioRom_v2.61.21 ) it will up date the rome you will get 100% . Your JAMin will work again and you will get it back with i-mate rom but the SPL will not ccange it will still as it is ( SPL 2.2xxxxx001).
9- Any time you can return to te original rom you must follow this way untel some one can unlockcid or there is anew update from i-mate.
I try this way three times tody and it is working very good.
if my 818pro is G4, is it impossible to get back to 2.1* ? >.<
if my 818pro is G4, is it impossible to get back to 2.1* ??? >.<
use what in this topic and you can do what you want I myself downgrade my rom from 2.20 to 2.09 and my Qtek is working great
http://forum.xda-developers.com/showthread.php?t=300356
Please please please, sum 1 here can be kind enuf 2 help with my problem.After installing wm5 finding lots of issues tried to downgrade to 2003se and now stuck woth spl 2.5.0105, no os and only bootloader with no iu mode. i tried mtty but give error not allow operation!! and try to typhoonnbftools but says no immediate flash available. I also try to use ruu patched 1010064 spl / 1.01.0109 but to no avail. I am DESPERATE for a solution to this as I just need my phone workin again. I also try to use psdwrite but dont know/understand proper commands as I have official ROM from imate site and would like to know if possible to load this onto SD card or sumthn?
Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly
Hello, I have a HTC TyTn, and I am trying to upgrade it from wm 5.0 to wm 6.0, I have followed all the instructions, but it still dosent work, I think the problem is, that I dont have SPL-1.11, I have a lower one, PLEASE HELP ME!
This contains a lot of guides for Hermes:
http://forum.xda-developers.com/showthread.php?t=299462
This is a hard-spl thread by olipro.. you can follow the instructions there.
http://forum.xda-developers.com/showthread.php?t=296722
Thanks,Ill have a look!
if it is an official rom you won't need hard spl (just a heads up to save some time flashing)
It is original, but the htc eclub, dosent have any more upgrades for the htc tytn.
I did everything, but then it showed me
ERROR (260) : Update Error
The Update Utillity cannot connect to your PDA phone!
BUT MY PHONE WAS CONNECTED TO USB!!!!
PLEASE HELP ASAP!
When the multi tri thing appears, it shows
HERM200
IPL-SSPL by Des
HERM200
SPL-1.07.ds
WHATS WRONG?
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
akashbaj001 said:
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
Click to expand...
Click to collapse
you can get WM6.5 on http://www.mediafire.com/?3tmtt4izann
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
rshabou said:
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
Click to expand...
Click to collapse
Hello, this is what you are looking for, ww.windowsceportal.hu/download/apps/htc_wizupgradeut.zip extract it and in the same folder put your rom file.
Goodluck.
I tried on my cell but it gives incorect update utilty...
I tried on my cel...but it's still givng windows Mobile 5
hassaan_july said:
I tried on my cell but it gives incorect update utilty...
Click to expand...
Click to collapse
Are you sure you are on the right device page, Each device has it's own compatible upgrade utility, so if you dont have a wizard it will not work.
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
hassaan_july said:
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
Click to expand...
Click to collapse
You should read this guide, it has all the required info.
http://forum.xda-developers.com/showthread.php?t=298613
error with code 266 or 260
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?