i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
akashbaj001 said:
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
Click to expand...
Click to collapse
you can get WM6.5 on http://www.mediafire.com/?3tmtt4izann
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
rshabou said:
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
Click to expand...
Click to collapse
Hello, this is what you are looking for, ww.windowsceportal.hu/download/apps/htc_wizupgradeut.zip extract it and in the same folder put your rom file.
Goodluck.
I tried on my cell but it gives incorect update utilty...
I tried on my cel...but it's still givng windows Mobile 5
hassaan_july said:
I tried on my cell but it gives incorect update utilty...
Click to expand...
Click to collapse
Are you sure you are on the right device page, Each device has it's own compatible upgrade utility, so if you dont have a wizard it will not work.
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
hassaan_july said:
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
Click to expand...
Click to collapse
You should read this guide, it has all the required info.
http://forum.xda-developers.com/showthread.php?t=298613
error with code 266 or 260
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?
Related
I followed the instructions to upgrade to a Portuguese ROM
As discribed in
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
http://rapidshare.com/files/18878817/POR_11205_122_11210_ship.exe
At first place I got an error 120 country error
Then I tried MaUpgradeUt_noID.exe like i read in this forum.
I read that I could use an option in RUU.conf called [CHECKCEID_TYPE]=1
But with or without this option I get the Error 150 Rom Upgrade Utility Error saying this is not the apropriate rom upgrade version (with MaUpgradeUt_noID.exe).
When i use ROMUpgradeUt.exe I get the error 101. Connection error.
Right now my PDA is saying that is connected by usb, with 1.02 below without any blacklight.
I unchecked the USB connections but in my case is in windows mobile device center because i use windows vista business.
Please help me because i realy need this pda working.
Thanks a lot your time
same problem
i have the same problem with my s110
its still in usb or serial mode witout backlite
i dont now what to do so ist becomes still allive if you get any help let me nowh
hi there
i have a qtek s110 too and i'm pondering the upgrade to the port rom version.
i have been doing some research i think that the rom upgrade can only be done through windows xp.
have you both done it on vista?
that might be the problem...
i don't want to take any risks on doing it, so i'm still investigating...
well i updated or chaged the language on my magician last week also to portugees rom for a girlfrend with portugees background i know and she does not know english that good
from the opperating system i got the same errors as you guys discribe but when i did put it into bootloader mode ran the MaUpgradeUt_noID.exe en the upgrade whent smooth just try to run the upgrade again your device is already in bootloader mode as far as i understand i did the upgrade in XP not sure the same trick will work in Vista
Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.
aditya4ibm said:
Hi, Please any one can help me. I have HTC TYTN II with Windows 6.1 but now i want to install Windows 6.0. I hve also tried to install HARD SPL but it gives after 1%. but whe i try to boot it with Jump Spl then it gives error after 15%. So, any one can help me.
Click to expand...
Click to collapse
Try downgrading to your providers official 6.0(Orange/at&t/HTC) then hardSPL, i read somewhere it works better on WiMo 6.0.
Don't Work
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.
Have you downloaded the correct official ROM for your device?
aditya4ibm said:
I hve try to downgrade back to Windows 6.0 but after 15 % it gives error i.e. Invalid Vendor ID. I hve downgrade with jump spl and if i directly downgrade with Orginial HTC or At & T then after 0 % it gives same Update Error.
Click to expand...
Click to collapse
Doubt
How should i Know which is my correct ROM and from where i can download bcoz i hve downloaded from this website only but on HTC official website there is only 6.1 version not 6.0 so plz help me. I want this in English lang.
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks
Can anyone please help me I have tried to upgarde My Loox N560 to
WM6 but It just switches of the connection. I've done a factory reset
but still no luck. I have not put a password on this device.
The device flashes and then a dolphin sceen appears with 2.14.G4
2.15 on it.
Error opening the USB Port
comes up on the downloader
what am I doing wrong?
regrads
hudsoft
Hudsoft said:
what am I doing wrong?
regrads
hudsoft
Click to expand...
Click to collapse
I think that the answer is pretty obvious..........first of all " you bought a loox 560. Pretty cool in 2006 but............
Secondly , I don't think a WM 6 upgrade was ever released for that phone. Any WM 6.0 upgrades you find here will not work because upgrades are very device specific.
Lastly, that phone is not supported on this site, so any help will be minimal and generic or not forthcoming at all.
Hi,
I've got two TREO750 devices. Following the same procedure I've updated both to WM6.5: from 5 to 6.1 to 6.5. The OS and FW versions are the same. Weird enough the software version of the devices are different: one uses TREO750-2.27 while the other is still on TREO750-1.15.
A closer look shows that the full 6.1 image flashes all parts of the software successfully (according to the update screen). So it *seems* to work but is not.
Any clues about how to fix this? Thanks for your help!
jeroengsm said:
Hi,
I've got two TREO750 devices. Following the same procedure I've updated both to WM6.5: from 5 to 6.1 to 6.5. The OS and FW versions are the same. Weird enough the software version of the devices are different: one uses TREO750-2.27 while the other is still on TREO750-1.15.
A closer look shows that the full 6.1 image flashes all parts of the software successfully (according to the update screen). So it *seems* to work but is not.
Any clues about how to fix this? Thanks for your help!
Click to expand...
Click to collapse
did you update the HSPL on the device before updating the rom ??
after you update with the Hard spl then you can flash with any ROM, This thread hspl ~ http://forum.xda-developers.com/showthread.php?t=334100
Hakim Rahman said:
did you update the HSPL on the device before updating the rom ??
after you update with the Hard spl then you can flash with any ROM, This thread hspl ~ http://forum.xda-developers.com/showthread.php?t=334100
Click to expand...
Click to collapse
The original poster would not have been able to flash custom ROMs without flashing the HSPL
The problem is the method of flashing, either through USB or MiniSD. Flashing through USB using Palm's Desktop Updater program is the only way for the software version to update itself. When flashing through MiniSD the Software Version cannot update due to the lack of Palm's payload file.