Can anyone please help me I have tried to upgarde My Loox N560 to
WM6 but It just switches of the connection. I've done a factory reset
but still no luck. I have not put a password on this device.
The device flashes and then a dolphin sceen appears with 2.14.G4
2.15 on it.
Error opening the USB Port
comes up on the downloader
what am I doing wrong?
regrads
hudsoft
Hudsoft said:
what am I doing wrong?
regrads
hudsoft
Click to expand...
Click to collapse
I think that the answer is pretty obvious..........first of all " you bought a loox 560. Pretty cool in 2006 but............
Secondly , I don't think a WM 6 upgrade was ever released for that phone. Any WM 6.0 upgrades you find here will not work because upgrades are very device specific.
Lastly, that phone is not supported on this site, so any help will be minimal and generic or not forthcoming at all.
Related
Hi,
I can't get windows update to work, it just says it can't connect to the server. I do have connection to the internet so something else must be failing.
Does it work on you phones?
rgrds
Björn
Does not work as well
on my phone...
Not at all on mine either
I get the same message.
Have you use a Cooked Rom? If yes -> no space in the OS Partition.
cocked rom
where did u get a cocked rom ?
if you have the HTC S710, it's been disabled. they haven't decided if they will enable it yet.
the orange spv e650 seems to work though,
rhedgehog said:
if you have the HTC S710, it's been disabled. they haven't decided if they will enable it yet.
Click to expand...
Click to collapse
Seems stupid to have a service availably but not disabled and not inform about it.. Oh well hopefully they will fix it so we can get "up to date" software..
rgrds
Björn
I had the same problem! But after a official ROM update (http://www.htc.com) earlier this year it was working. But don't bother to update your WM 6.0 because i used the windows update this week and there were no updates. Probably because it is an modified version of WM 6.0
Mda pro T-mobile
How can i get this rom on my phone
TNT_5.0_Wizard_TouchFLO this rom is from this sit
When i run the update my phone get kicked out by active sync and is not connectet anymore then i get an error 114 or 260
What should i do to run this rom on my phone.
Mda pro t-mobile
rom versie:1.30.115 wwe
rom date :04/17/06
radio: 1.10.03
protocol 42.44.p8
extrom: 1.30.233 wwe
How can i get this rom on my phone
TNT_5.0_Wizard_TouchFLO this rom is from this sit
When i run the update my phone get kicked out by active sync and is not connectet anymore then i get an error 114 or 260
What should i do to run this rom on my phone.
Mda pro t-mobile
rom versie:1.30.115 wwe
rom date :04/17/06
radio: 1.10.03
protocol 42.44.p8
extrom: 1.30.233 wwe
Thanks to everybody on XDA
You cannot get a ROM from a Wizard on an Universal ...
mda pro
Is there any rom including touchflo for my mda pro
This ROM is not for your device, you can't.
Mda pro
Skwyk said:
This ROM is not for your device, you can't.
Click to expand...
Click to collapse
Is there any rom including TouchFlo for my device
thans for repley
Please don't start 2-3 threads with the same question. You won't get help any faster and you just make the moderators job harder.
Anyhow, since you're in the Universal Mobile 6 forum, you should know that there are various versions of Windows Mobile 6 available for your device. Just look.
Good luck.
ello007 said:
Is there any rom including TouchFlo for my device
thans for repley
Click to expand...
Click to collapse
ello007,
I found different people have different understanding of touch flo.
Anyhow the HTC Today plug in (with the weather, email,msg, shurtcuts etc) will be not displayed correctly in Universal. HTC today plug in is for QVGA screens. You know Universal got VGA
The cube and scrolling contacts application also doesn't function in Universal yet.
My understanding is the Original device "touch.dll" has to be replaced with a modified "touch.dll" which comes from other devices and port it to a new device. As the touch.dll cant be overwritten therefore the guys cooking it in to new ROM. Anyhow again until now replacing the original Universal touch.dll leading to none responding screen or even the device doesn't boot up.
Hope it gives you a idea
mda pro
Bulldog said:
ello007,
I found different people have different understanding of touch flo.
Anyhow the HTC Today plug in (with the weather, email,msg, shurtcuts etc) will be not displayed correctly in Universal. HTC today plug in is for QVGA screens. You know Universal got VGA
The cube and scrolling contacts application also doesn't function in Universal yet.
My understanding is the Original device "touch.dll" has to be replaced with a modified "touch.dll" which comes from other devices and port it to a new device. As the touch.dll cant be overwritten therefore the guys cooking it in to new ROM. Anyhow again until now replacing the original Universal touch.dll leading to none responding screen or even the device doesn't boot up.
Hope it gives you a idea
Click to expand...
Click to collapse
thanks for the respons
so there isn't a rom upgrade with touchFlo for my phone
I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
I try it too with unchecked "allow USB connection" in AS (and i have XP). By me (and many others) the problem is owerwrited bootloader. You can see attached files and compare it, you will be see...
You are right, many problems with flashing is between chair and keyboard But not now.
You have the same version of bootloader like me, then probably in version of bootloader its not. I have originally T-mobile MDA compact.
Can you send me dump of your bootloader for compare?
Sorry for my bad english, i am from Czech.
yes mate no problem, link me to a guide for bootloader dumping, i've nevere done it...
ps: good luck for yours magician
Hi Shelver,
I have 2.03TX in only one magician. The second unit is powered by Cotulla WWE_03 now
Download and unzip this: http://www.nah6.com/~itsme/itsutilsbin-20090515.zip
Connect and synchronize via AS your magician, stay connected (this util working via Active Sync) and in comand line (IN win XP of course, in vista its not guaranted) go to your unzipped directory and write this (without commas):
"pmemdump 0x80000000 0x00040000 boot.bin"
and wait few seconds to done.
It read flash from address 0x80000000 to 0x80040000 (lenght 0x40000) and store dump to file "boot.bin" Its bootloader area. Then you can send me it, compare with my posted bootloaders...
shelver said:
hi mate, i 've had installed 2.03tx and 1.13 radio on my qtek s100 for about one year...
i've had no problem in downgrading radio to 1.12 and flashing device with cotulla rom,
the only problem is that cotulla rom does not support samsung touchscreen
my bootloader is 1.02
the only trick to update i've used is to keep activesync loaded with "allow usb connection" unchecked in settings. then it worked like a charm...
Click to expand...
Click to collapse
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
philiplam said:
Me 2, upgraded from tx203 to Cotulla's rom and back for some SMS backup and then upgraded to Cotulla's rom again.
I think I can go as many times as I wish with my magician.
Click to expand...
Click to collapse
You are lucky man I try it only one time, and bootloader is broken.
I have magicians only as toys, then, if it will be problem for me, then i repair bootloader via JTAG I only try 2.03TX, and try search some help for unlucky mans, who havent JTAG Now i have one broken, and one OK. But with Samsung LCD R3 . Maybee, i change display, or upgrade it to 128MB RAM for try _R1
I am HW developer, so HW problems is easy for me I create car multimedia PC on OMAP3530 platform now for my friends. Its better toy for me, magician is lovely history Only SW is hard to write to me
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
shelver said:
hi certik, my magician is still with cotulla rom and doesn't boot because of touchscreen driver,i've not flashed it again because of i don't use it.
i'm waiting a new rom,
however when flashed i'll send you my bootloader backup
Click to expand...
Click to collapse
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
e-certik said:
OK, Ill wait. I dont need it really, i have stored good copy of bootloader, i need it only for compare
And if you wish, you can flash cotulla WWE_03 ROM (you can directly from _04 to _03 say Cotulla) In this version touchscreen driver worked fine.
Click to expand...
Click to collapse
humm, ok mate, just the time to flash it with WWE_03 ROM then
hi mate, done, here is my bootloader
ps:touchscreen is now ok, thanks
Hey, you are fast
Thanks for bootloader, its the same as my original bootloader
good luck mate
e-certik said:
I have two magicians, and I read many posts about nonchangeable version 2.03TX.
I test it, and upgrade one unit. After upgrade really is not possible change any (OS or bootloader). Bootloader cant vrite itself or OS memory. I try all known techniques - SDboot, TTY (lnb, s2d d2s...) via USB, and standart os upgrade via PC (of cours, noID too).
So I have two magicians, then i use good tool from "itsme" called pmemdump.exe (thank you for your good job) and download OS images and bootloader images from my magicians. The reason is:
I dont say when, and/or why, but in some magiciansThe 2.03TX destroy bootloader!!
In my flashed magician is destroyed (nulled) area from 0x10000 to 0x10080.
I attach good (before upgrade) and destroyed (after upgrade) bootloader for comparsion
Maybee if "itsme" (or anybody other? ) create new version of pnewbootloader.exe compatible with version 2.03TX (because under this version OS it not working) then tens of magicians with flashed 2.03TX will be upgradeable again . (I can send any dump if it will be need, or try apply new version on my magicians).
Click to expand...
Click to collapse
as you i still have a hope to fix my poor magician
any kind programer can do what you have said will make me and many other happy again
i have the hope
Hi all,recently brought 2nd hand O2 exec windows 6.1 installed.
opening screen has these numbers
D.07.60 R
0.082.104
0.80.00
unit works ok but the phone won't connect at all 2g or 3g sim card
after doing lots of reading i gather the radio rom needs upgrading or do i upgrade the whole software.
I downloaded JASJAR_ME_13082_171_10900_wwe_ship but haven't run the upgrade as i don't want to kill the unit without finding out if it is safe to run or is it the latest update tool.
Also if i do the upgrade do i lose windows 6.1 installed.
Appreciate some help here.
p.s I'm running vista on pc
Welcome to forums
You have one of the best HTC devices ever made!
Have a look here to get all the info about it:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
You can flash another ROM and perhaps you can solve your issues
Good luck,
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
akashbaj001 said:
i have an i mate k jam windows 5 and i want to upgrade the software...
can anyone help me pls...
thanks in advance.
Click to expand...
Click to collapse
you can get WM6.5 on http://www.mediafire.com/?3tmtt4izann
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
rshabou said:
im looking for update utility, the actual program that installs the rom. i found my wizared in a shoe box after many year and figured i should flash a new rom and use it again. all the roms i find do not contain the update program. my wizard is a g3.
Click to expand...
Click to collapse
Hello, this is what you are looking for, ww.windowsceportal.hu/download/apps/htc_wizupgradeut.zip extract it and in the same folder put your rom file.
Goodluck.
I tried on my cell but it gives incorect update utilty...
I tried on my cel...but it's still givng windows Mobile 5
hassaan_july said:
I tried on my cell but it gives incorect update utilty...
Click to expand...
Click to collapse
Are you sure you are on the right device page, Each device has it's own compatible upgrade utility, so if you dont have a wizard it will not work.
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
hassaan_july said:
Another version of Utility worked....
but after flashing it do some installation and then restart...and after restart it strt again showing the Windows Mobile 5.9
I Have Done Hard Spl For my G4
Click to expand...
Click to collapse
You should read this guide, it has all the required info.
http://forum.xda-developers.com/showthread.php?t=298613
error with code 266 or 260
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?