I have searched everywhere on here! cannot find answer specific to my problem. I am trying to replace my rom I previously flashed with a new rom with a nbh file. I dropped the file into the topaz custom ruu folder and proceded to flash. However it comes up with the error "update utility cannot open requested file", I am new to this and not very savy when it comes to files....can anyone tell me what I am doing wrong and how I can fix it??!
Related
well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
Read here, http://forum.xda-developers.com/showthread.php?t=448008
I read through the majority of that thread and i did not see anything about a NBF file or this specific type of error
I thought you could only flash NBH files to a Fuze...have you tried one of those?
I am prtty much a newb to the HTC Fuze i just got it and decided to flash the RC4 Elite Project Rom and that error message popped up and i did hard Spl
Hello,
I want to (re)flash WM6.1 from microSD, but can´t find a nbh. Flashing in softmode will hang up and freezing my screen on the tricolour.
Extracting from RUU_Kaiser_HTC_GER_3.28.407.0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
will create an exe-File.
Any chance to get out a kaiserimg.nbh from the exe or any link to a german WM6.1 Rom /NBH?
Regards
Check the Kaiser Wiki instead of starting a new thread. There're repositories for many versions of OEM ROM.
Of cause I´ve done this before. But the german ROMs I´m looking for will be extracted as exe-files, I couldn´t find the necessary hints.
Try open the exe using Winzip. You might see the NBH there.
Edit: I tried running the Kaiser_HTC_ASIA_HK_WWE_3.34.721.2.exe I have, it installs there should be folder containing RUU_Signed.nbh (your temp file folder?). Use this file, rename as KAISIMG.nbh and flash using SD method.
Get Uniextract, then right-click on this installshield wizard and select "Uniextract to subdir" .
Uniextract can do thousands of formats. It's nice program lol.
Hi
I have a HTC Dash and im interested in the 3VOLUTION SERIES ROM. I downloaded and ran HARDSPL app. And now downloaded the latest version of the ROM.
Im confused where to go from there. The instruction say just run the ROMupdateutility. But i dont see the option to flash the ROM i downloaded. Do i have to put the file in specific area?
You unzip the file to your PC and run Auto
Hey,
I tried to pot my Treo back to WM6 from Vodafone with the original updater, but it keeps telling me that my device is not supported because of language issues (Right now there is WM6.1 working on it in english and I need to flash the German WM6). when I open the installer with WINRAR I can see a couple of *.nbh files (cheeimg.nbh and cheeimg_fw.nbh). Is it eventually possible to just take one of them and flash it? or do they anyway require to have a preinstalled stock ROM to update with them? And why are there so many other files in, when i usually actually just need one nbh file as a rom?
Thanks for helping me understand my phone
bump
i d like to know that aswell. did you fixed the issue by now?
If you want to use the official updater you need to modify the payloads.xml file.
You can find it by opening the official updater, but don't start the upgrade. Opening the updater will extract a bunch of files to your TEMP folder. The payloads.xml file will be in one of the subfolders. The folder is called something random so you'll have to seach for it, but you'll see a bunch of Palm icons in it so you'll know you're there.
You can edit the payloads.xml file with any text editor. Notepad works fine.
If you are changing carriers as part of the update, you will probably need to change the carrier code to the one matching the currently installed ROM. This is AT&T, for example.
Code:
<carrier_codes>CNG,ATT</carrier_codes>
I think Vodofone is VF, but you'll have to do some searching to confirm that.
Then you need to change the revision range to allow the downgrade.
Code:
<revision_range>
<low>1.13</low>
<high>3.00</high>
</revision_range>
Save it when you are done, and then start the updater. It should work. If not, there are plenty of posts here about downgrading ROM's, so search around until you find something that works for you.
And yes, you can extract the ROM's from a desktop updater and flash using the SD card method, assuming of course you have successfully HardSPL'd your phone. You need the CHEEIMG_FW.nbh file, but must rename it to CHEEIMG.nbh before putting it on the SD card.
You don't need to Hard-SPL in order to flash official Palm WM ROMs from a MiniSD.
Hi,
I have an unlocked Treo Pro GSM phone and after doing a lot of reading I have managed to dump its ROM and I now have the four RAW files. However, I still can't find a way to rebuild the ROM and create a .nbh file out of them. Could someone please point me in the right direction or help me by rebuilding the ROM? I know I should only need part01 and part02.
I'm currently downloading Treo Pro kitchen and I assume it will be possible to rebuild the ROM with it, I just need some guidance. If anybody wants the RAW files please let me know and I'll upload them for you.
Thanks in advance.
Edit: Using the kitchen posted here I have managed to create a os-new.nb file by clicking on Extra Buttons and then RAWS2NBH then I got a message "Need the ROM nbmerge command? I clicked Yes then got the message Execute NbhUtils to build nbh file? I clicked Yes, the NBH Utility pops up and I select PANT100 under Target Device and finally under NBH Items I select the path of the os-new.nb file for the OS item and clicked on Build NBH! I chose the output location but after I get a message saying that it is done there is no nbh file in the location I selected.
palmerx said:
Hi,
I have an unlocked Treo Pro GSM phone and after doing a lot of reading I have managed to dump its ROM and I now have the four RAW files. However, I still can't find a way to rebuild the ROM and create a .nbh file out of them. Could someone please point me in the right direction or help me by rebuilding the ROM? I know I should only need part01 and part02.
I'm currently downloading Treo Pro kitchen and I assume it will be possible to rebuild the ROM with it, I just need some guidance. If anybody wants the RAW files please let me know and I'll upload them for you.
Thanks in advance.
Edit: Using the kitchen posted here I have managed to create a os-new.nb file by clicking on Extra Buttons and then RAWS2NBH then I got a message "Need the ROM nbmerge command? I clicked Yes then got the message Execute NbhUtils to build nbh file? I clicked Yes, the NBH Utility pops up and I select PANT100 under Target Device and finally under NBH Items I select the path of the os-new.nb file for the OS item and clicked on Build NBH! I chose the output location but after I get a message saying that it is done there is no nbh file in the location I selected.
Click to expand...
Click to collapse
could i have the .raw files for part 00 to part 3 this would help me create a thread that has all stock ROMS for referance i regret the fact that i didnt do this before because most of the links to the stock ROM are dead