well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
Read here, http://forum.xda-developers.com/showthread.php?t=448008
I read through the majority of that thread and i did not see anything about a NBF file or this specific type of error
I thought you could only flash NBH files to a Fuze...have you tried one of those?
I am prtty much a newb to the HTC Fuze i just got it and decided to flash the RC4 Elite Project Rom and that error message popped up and i did hard Spl
Related
I've tried another rom image for my mda compact 2 and now my mdac2 does'nt start any more.
I have tried several rom-images (for compact, atom, ewtc..), but I can install no one .
On the T-Mobile Homepage there is no Image for the MDAc 2.
Can anyone help me ?
I only come to the bootloder screen (red - green - blue).
I need a rom-image, that i can start from the bootloader.
thx
Try this link from TMO UK http://t-mobile.iris-global.com/download_manager_mda_com2.html
Success, M
I've already tried this, and it starts updating but then comes the message :
ERROR [294] : INVALID VENDER ID
THis Update Utility cannot be used for your PDA Phone.....
Maybe I have to unlock the CID first ?
But can I unlock the CID with the aWizard, when the Comp.2 is in the Bootloader mode (red-gree-blue) ?
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
Ouch,
Yes the cid-unlock will be needed :-( Can't you fix the RUU.conf or something simular with a first line like checkid=1 ? I've read about it on the board & seems to work for magician. & there's some tool like MaUpgradeUT_noid for the wizard too, but I don't remember whether that is awizard :-(
You're almost of to the shop isn't it.
BTW when you unzip the shipped-rom, do you get all kinds of nbf files. & Do they all start with the same word when you open them in hexeditor? I use nbfdec to decode them to a 'normal' file which can be edited, then you could be able to fix the header of the nb1 encode it again & try to update your device.
& have you tried some of these tools ftp://xda:[email protected]/Wizard/DumpROM/
In the unzipped folder is no file like RUU.conf.
Only RUU.dll and RUUREsource.dll
There are following files in the folder
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.xex
RUUGetInfoi.exe
RUUResource.dll
RUU.dll
And I've downloaded " nbfdec " , but I can not start this program.
I think i have to reboot my computer.
un zip all the files from the t-mobile package
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
download this and unrar and overwrite in the same folder.
connect up the phone in bootloader to pc and run the ..._NoID.exe
as theres no activesync connection it will pause for a bit on the checking existing rom but still let you carry on
ignore the picture of the wizard, just make sure your installing the right nk.nbf for the compact 2
I've exactly done what you said, the update ended with 100 % and now the device starts until the bootloader-screen (red-green-blue).
Have I done something wrong ?
What has happened ?
dave106 said:
ftp://xda:[email protected]/Wizard/Roms/Wizard_RomUpgradeUtility_noID.rar
Click to expand...
Click to collapse
That's the one I was referring to, thanks.
Bundy did you reset afterwards?
M
Yes, I did a Hardreset, a Softreset , but I only get to the picture with the 3 colors.
IPL 1.12
SPL 2.15
I'm terribly sorry, but we've ran out of my knowlegde of the MDA Compact II. So besides the usual question: have you ran the update a second time, for me this would be warranty issue.
Hope Dave is worth more.
Good luck, M
Yes , I have done the update a second time, but with the same effect - the device only starts in the three-color-screen.
So I think I can do nothing more ....
:-(
Good day...
There is a problem to install this official ROM RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship.exe
on my Qtek S200 ((AKU2) ROM: 2.9.7.25 Radio: 02.20.21 ExtROM 2.9.7.9456).
When i started to install this new ROW, there is appeared an error: Invalid VendorID. I`ve downloaded ROMUpdateUtility-NoVendorID.zip extract the utility out of archive to some directory, and extract new ROM in the same directory! Then i`ve just started this utility, next,next... there was an error again! error 208 (it seems like, this utility can`t recognize new ROM).
What should i do?
Where is my mistake?
Thanks for everyone`s help!
There was an answer on other website to use other version of this ROMUpdateUtility-NoVendorID (2.5.2; 2.00.1)
Has anibody this versions? May be somebody knows where to download this one?
Visit here. Maybe what you need is here...Good luck
denizovik said:
Good day...
There is a problem to install this official ROM RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship.exe
on my Qtek S200 ((AKU2) ROM: 2.9.7.25 Radio: 02.20.21 ExtROM 2.9.7.9456).
When i started to install this new ROW, there is appeared an error: Invalid VendorID. I`ve downloaded ROMUpdateUtility-NoVendorID.zip extract the utility out of archive to some directory, and extract new ROM in the same directory! Then i`ve just started this utility, next,next... there was an error again! error 208 (it seems like, this utility can`t recognize new ROM).
What should i do?
Where is my mistake?
Thanks for everyone`s help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=263116
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Note: This CustomRUU will not allow you to flash unsigned files unless you have HardSPL installed, it will not push SSPL.
Instructions as always: Drop the NBH file of your choice in the same folder as CustomRUU and start flashing
Recommended tools for handling NBH files:
NBHextract - Extract contents from NBH files
htc rom tool - Repack NBH files from *.nb files
Enjoy
Oh you tease we are so close to cooking so close just need to figure out the imgfs tools!
will this work in Vista as someone had posted a ruu that works in vista for the Hermes I believe.
I don't know, I don't use Vista. Try it and report if it works or not
It works for Vista!
Thanks
great job pof, keep it going
But it's for the wrong phone :Cry: now we just need this for the Athena...
Sorry for the noob question, but what does this customRUU do? I've already hardSPL'ed my tilt and load the kaiser ROM.
pof said:
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Click to expand...
Click to collapse
Do I understand this good (translate in my brains)?
In the original situation with original ROM, when you update the RadioROM the device will format? Strange!
kjones2k1 said:
Sorry for the noob question, but what does this customRUU do? I've already hardSPL'ed my tilt and load the kaiser ROM.
Click to expand...
Click to collapse
Re-read the first post. It's there. If you don't understand it, you probably won't be using it so I wouldn't worry about it.
-Mc
Man you are fabulous, great work much appreciated
Hyins said:
Thanks
Click to expand...
Click to collapse
Hi friend, is possibile extract your radio rom only?
Thanks in advance, bye
Invalid applciation ?
Hello,
May be obvious ...
Why do I get and invalid pocket pc application when trying to run the kaiserCustomRUU.exe on my kaiser ?
Edit my-stupid-self : it runs from the PC
I am using Duttys 6.1 beta rom and I have flashed my device using KAIS_Radinly_1.64.08.21_CustomRUU and now the device just sits there at the HTC screen. Of course in this state I can't flash the old radio back as it isn't getting into the main part of the OS to sync. I have tried hard resetting and that takes me to the set up pages but then it takes me back to the HTC locked page again.
Is there anyway to get it back?
I am a bit worried that I have bricked it.
yeah guy above me im new here todays my 3rd day but ive picked up a few tips and tricks while STILL trying to unlock my phone "can somebody please help me"
anyway try holding the camera button while soft reseting your phone the tri color screen should pop up the try installing the same rom or different one or you can just Hard spl o something like that PLZ someone correct me if im wrong i did say im new but just tryin to help
Nevermind, please delete this post.
XP SP3?
Has anyone tried flashing on a Windows XP SP3 ?
Tried using any RUU and having a problem whereby it gives the error "The application failed to initialize properly (0xc000007b)"
Is it me or has anyone else had this issue?
mystikal87 said:
Has anyone tried flashing on a Windows XP SP3 ?
Tried using any RUU and having a problem whereby it gives the error "The application failed to initialize properly (0xc000007b)"
Is it me or has anyone else had this issue?
Click to expand...
Click to collapse
No problems here flashing with XP Pro SP3 (ENG).
pof said:
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Note: This CustomRUU will not allow you to flash unsigned files unless you have HardSPL installed, it will not push SSPL.
Instructions as always: Drop the NBH file of your choice in the same folder as CustomRUU and start flashing
Recommended tools for handling NBH files:
NBHextract - Extract contents from NBH files
htc rom tool - Repack NBH files from *.nb files
Enjoy
Click to expand...
Click to collapse
I am trying to just flash my Radio. I have downloaded KAIS_Radinly_1.65.17.56_CustomRUU and when I try and upgrade my radio it says do you want to update your ROM from 3.14.405.0 to 1.0.0.0. Should I just OK this so it will continue to the Radio Update? I do not want to change my ROM
Hi, never extracted a radio before, and I am totally blind so I can't use windows 6.5 yet, so just want the radio from the 6.5 rom, I extracted the .nb files from the spl.nbh and the ru_signed.nbh and they both have a 22.1 mb file which I asume is the radio, however two things, I don't know which is the correct one and even tried both but get an error that invalid model id when using the ru, do I need to sign the nb before converting it back to an nbh or please give me some guidence in this process.
gigawatt said:
Hi, never extracted a radio before, and I am totally blind so I can't use windows 6.5 yet, so just want the radio from the 6.5 rom, I extracted the .nb files from the spl.nbh and the ru_signed.nbh and they both have a 22.1 mb file which I asume is the radio, however two things, I don't know which is the correct one and even tried both but get an error that invalid model id when using the ru, do I need to sign the nb before converting it back to an nbh or please give me some guidence in this process.
Click to expand...
Click to collapse
Take a look at this post, I alreaday did it.
http://forum.xda-developers.com/showthread.php?t=550863
the radio you did was the one from the t-mobile 6.5 windows mobile and is it the thrd post with radio 3.47.25.29 because I thought the radio was higher then that, and if I wanted to do it myself how could I?
Dash 3G, Snap ROM V 122209 can used in C720W?
how i can run a nk.nbf with out a ROM Update Utility & flash it to my device ???
You need a RUU. Search the threads for one, maybe on a HOWTO thread or on a thread where people are asking about running an RUU in Vista. Since the RUU doesn't change with each ROM, we usually put out the ROMs as just NBF files without the RUU.
Just about any RUU will work. Just put the nbf file in the same folder as the executable, and run it.