Hi, never extracted a radio before, and I am totally blind so I can't use windows 6.5 yet, so just want the radio from the 6.5 rom, I extracted the .nb files from the spl.nbh and the ru_signed.nbh and they both have a 22.1 mb file which I asume is the radio, however two things, I don't know which is the correct one and even tried both but get an error that invalid model id when using the ru, do I need to sign the nb before converting it back to an nbh or please give me some guidence in this process.
gigawatt said:
Hi, never extracted a radio before, and I am totally blind so I can't use windows 6.5 yet, so just want the radio from the 6.5 rom, I extracted the .nb files from the spl.nbh and the ru_signed.nbh and they both have a 22.1 mb file which I asume is the radio, however two things, I don't know which is the correct one and even tried both but get an error that invalid model id when using the ru, do I need to sign the nb before converting it back to an nbh or please give me some guidence in this process.
Click to expand...
Click to collapse
Take a look at this post, I alreaday did it.
http://forum.xda-developers.com/showthread.php?t=550863
the radio you did was the one from the t-mobile 6.5 windows mobile and is it the thrd post with radio 3.47.25.29 because I thought the radio was higher then that, and if I wanted to do it myself how could I?
Dash 3G, Snap ROM V 122209 can used in C720W?
Related
Good day
I have a 10 day old imate new jam (NM8 Magician). I want to upgrade just my Radio version to 1.13 (hoping to rectify my problem)due to a crap gsm signals as this is a replacement to a same model which i thought was faulty, but when i got the replacement, im stuck with the same problems ( poor gsm signal and crap camera). As i search the Magician forums, the more i read, the more i get confused. I have been to the wiki side of the forum as well as the main forums.
Can someone please enlighten me, or just put me in the right direction where to download Radio version 1.13, and some instructions.
Details of my imate jam are:
PM10A
Rom Version 1.12.00WWE
Rom Date May 28, 2005
Radio Version 1.12.10
Protocol Version 1337.42
ExtRom Version 1.12.171WWE
Thank you very much!!!!
The story to upgrade to radio 1.13 can be found in this thread: 'Upg to 1.13 WWE ROM (with 1.13 Radio) in 10 easy steps!' @ http://forum.xda-developers.com/vie...&start=0&sid=75c5e40168a22052fb7c5554bddd68c2
Cheers, M
nm8,
You can try my much easier post, I have pasted a few previous posts to save time so it might not flow. Go to this link
http://forum.xda-developers.com/viewtopic.php?t=27537&highlight=
to get the MaUpgradeUt_noID.exe file you will need and follow my instructions. It really is not to hard. I hed never done any of this before so if I could do it any one can.
Make sure when you view that link you are logged on or you will not see the download for the MaUpgradeUt.exe file. Once you have downloaded, winrar the iMate rom to open or seperate the files, there should be 7 or 8 files. You will see the MaUpgradeUt.exe file that comes with the iMate rom in those 7 or 8 files. Delete that MaUpgradeUt.exe file and replace it with the MaUpgradeUt.exe you downloaded from the link. Now click on the MaUpgradeUt.exe rom, it will do its thing. It may still give you wrong country code, dont sweat it, just re click on the MaUpgradeUt.exe file and start again. It will only give you wrong country code once, maybe twice but keep re starting, it will work. Enjoy
Ps because this was for a previous post remember to replace any instructions of "imate rom" with Radio13
hi
thanks to both of you for the quick reply. i have downloaded the files.
now before i begin, when i unzipped MagicianRadio_1[1].13.00_maupgrade, there is a file named "HTCRUU.dll". some threads say i nedd to rename it to "RUU.dll" only, secondly, when i connect my jam to pc, doi have to untick USB?
thank you once again
No need to untick usb, the upgrade needs the usb connection to check the country id & it will put your device in bootloader with the transfer to & execution of the file enterbl.exe on your magician.
don't know about the ruu dll. when you got enough Bandwith download a Complete shipped rom from the ftp & extract all the files from it, or view them with winzip to see the correct file name.
cheers, M
hi oltp,
yes i had to rename HTCRUU.dll to RUU.dll, the upgrade process didnt run before i renamed it.
evrything is fine now.... ill be testing hte fone and posting any difference it made to my gsm reception in due time.
cheers
thought of updating this post for the sake of other newbies like me looking for answers. i have not encountered any problems so far after updating to radio 1.13...
thanks to imapfsr and oltp for their lightning fast replies to my questions, a million times better than clubimate support!
My pleasure,
I appreciated everyones help on this site so I do what I can when its my turn!!!!
My pleasure,
I appreciated everyones help on this site so I do what I can when its my turn!!!!
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Note: This CustomRUU will not allow you to flash unsigned files unless you have HardSPL installed, it will not push SSPL.
Instructions as always: Drop the NBH file of your choice in the same folder as CustomRUU and start flashing
Recommended tools for handling NBH files:
NBHextract - Extract contents from NBH files
htc rom tool - Repack NBH files from *.nb files
Enjoy
Oh you tease we are so close to cooking so close just need to figure out the imgfs tools!
will this work in Vista as someone had posted a ruu that works in vista for the Hermes I believe.
I don't know, I don't use Vista. Try it and report if it works or not
It works for Vista!
Thanks
great job pof, keep it going
But it's for the wrong phone :Cry: now we just need this for the Athena...
Sorry for the noob question, but what does this customRUU do? I've already hardSPL'ed my tilt and load the kaiser ROM.
pof said:
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Click to expand...
Click to collapse
Do I understand this good (translate in my brains)?
In the original situation with original ROM, when you update the RadioROM the device will format? Strange!
kjones2k1 said:
Sorry for the noob question, but what does this customRUU do? I've already hardSPL'ed my tilt and load the kaiser ROM.
Click to expand...
Click to collapse
Re-read the first post. It's there. If you don't understand it, you probably won't be using it so I wouldn't worry about it.
-Mc
Man you are fabulous, great work much appreciated
Hyins said:
Thanks
Click to expand...
Click to collapse
Hi friend, is possibile extract your radio rom only?
Thanks in advance, bye
Invalid applciation ?
Hello,
May be obvious ...
Why do I get and invalid pocket pc application when trying to run the kaiserCustomRUU.exe on my kaiser ?
Edit my-stupid-self : it runs from the PC
I am using Duttys 6.1 beta rom and I have flashed my device using KAIS_Radinly_1.64.08.21_CustomRUU and now the device just sits there at the HTC screen. Of course in this state I can't flash the old radio back as it isn't getting into the main part of the OS to sync. I have tried hard resetting and that takes me to the set up pages but then it takes me back to the HTC locked page again.
Is there anyway to get it back?
I am a bit worried that I have bricked it.
yeah guy above me im new here todays my 3rd day but ive picked up a few tips and tricks while STILL trying to unlock my phone "can somebody please help me"
anyway try holding the camera button while soft reseting your phone the tri color screen should pop up the try installing the same rom or different one or you can just Hard spl o something like that PLZ someone correct me if im wrong i did say im new but just tryin to help
Nevermind, please delete this post.
XP SP3?
Has anyone tried flashing on a Windows XP SP3 ?
Tried using any RUU and having a problem whereby it gives the error "The application failed to initialize properly (0xc000007b)"
Is it me or has anyone else had this issue?
mystikal87 said:
Has anyone tried flashing on a Windows XP SP3 ?
Tried using any RUU and having a problem whereby it gives the error "The application failed to initialize properly (0xc000007b)"
Is it me or has anyone else had this issue?
Click to expand...
Click to collapse
No problems here flashing with XP Pro SP3 (ENG).
pof said:
By popular demand I've created HTC Kaiser CustomRUU, it is basically the same as the HTC RUU, but packed in one single exe file and slightly patched to perform a 'task 32' instead of a 'task 28' after flashing an NBH, so it will not format your device if you just flash a radio or a Splash screen.
Note: This CustomRUU will not allow you to flash unsigned files unless you have HardSPL installed, it will not push SSPL.
Instructions as always: Drop the NBH file of your choice in the same folder as CustomRUU and start flashing
Recommended tools for handling NBH files:
NBHextract - Extract contents from NBH files
htc rom tool - Repack NBH files from *.nb files
Enjoy
Click to expand...
Click to collapse
I am trying to just flash my Radio. I have downloaded KAIS_Radinly_1.65.17.56_CustomRUU and when I try and upgrade my radio it says do you want to update your ROM from 3.14.405.0 to 1.0.0.0. Should I just OK this so it will continue to the Radio Update? I do not want to change my ROM
Ok I have taken the official windows mobile 6.1 rom from att and used the kitchen to extract RUU_signed.nbh which was successful in unpacking. I added one Package to oem folder and used kitchen buildos option. Rom was built successfully however when flashed to device it never even boots. More interesting than that is the New RUU_signed.nbh files is actually smaller than the original Ruu_signed.nbh file that was in the Cingular Official 6.1. Anyone with any ideas. Keep in mind that I have successfully built several roms based on the latest official cingular 6.0 rom with out any problems. Has something changed? Do I need a special WM6.1 Kitchen? Please Help me.
first, which kitchen are you using?
the (!!!readmefirst!!!.txt) says kitchen 0.3.
Pampered4Life said:
the (!!!readmefirst!!!.txt) says kitchen 0.3.
Click to expand...
Click to collapse
kaiserkitchen?
I would try updating to the latest version just to make sure, then we'll continue
Same situation. Kitchen RAR FIles says KaiserKitchen 1-20-08.rar extract and build succeeds however same scenario as decribed in original post. Strangely enough can use the same kitchen but using the att official wm6.0 rom and works flawlessly. If you would like I am willing to send an invitation for remote assistance via email to you for help?
I doubt it...
but, just out of curiousity, can you attach your one package that you are adding?
Fixed. Forgot I disabled a .net assembly in the configuration. Thanks anyways man.
well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
Read here, http://forum.xda-developers.com/showthread.php?t=448008
I read through the majority of that thread and i did not see anything about a NBF file or this specific type of error
I thought you could only flash NBH files to a Fuze...have you tried one of those?
I am prtty much a newb to the HTC Fuze i just got it and decided to flash the RC4 Elite Project Rom and that error message popped up and i did hard Spl
Can anyone give me some guidance on this? I am looking to dump the SPL and Radio from the device (not an NBH file ... that is easy).
Can someone running a stock ROM attempt to extract the SPL using the command pmemdump 0x9a000000 0x80000 spl.nb ... If I can get a copy of this from a stock ROM, I can compare it to the SPL included in the stock ROM NBH file.
pmemdump is part of ITSUTILS.
I also would like to attempt this.
I have just received a new TP2 and discovered it has a newer radio 2.18.02WV and would like to see if it can be extracted from the device.
Suggestions anyone??
diamondfuel said:
I also would like to attempt this.
I have just received a new TP2 and discovered it has a newer radio 2.18.02WV and would like to see if it can be extracted from the device.
Suggestions anyone??
Click to expand...
Click to collapse
Can you run the command listed in post 1 and post the output file? I can compare this output file to the 2.18.02WV radio to verify that the addresses are correct.
Thanks.
DJ
Hi, have you already got this?
I can do it for you.