Related
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
My recommendation is to buy a case that covers the phone completely, you'll forget about it...
I have a Diztronic case arriving Wednesday, but need to use it with my car dock without the case. It's not a big deal, but given that its trivial to do (except for finding the right paint) I would like to do it.
Well you're definately right, a simple cosmetic fix would be best, here's your part...
Not sure what to tell you man, maybe someone will chime in with some info or similar experience... It's just cheap plastic...
I found this on eHow:
How to Repair Chipped Plastic
You can actually get the bezel separately for $17, but the screen needs to be heated to come off - not easy. Plastic repair is easier (as you pointed out) but a good job requires good paint. Hopefully someone has already tried.
Thanks for the suggestions.
I remembered this thread from cappy section... With people making modifications to their housings... possibly you can msg one of them...
dblevitan said:
I have a blue Verizon S3. I recently dropped it and it of course landed such that there are a few chips in two corners. The damage is just cosmetic, but I'd like to fix it if possible. My understanding is that the bezel is attached to the screen,requiring either a difficult bezel replacement or a complete screen replacement, but both of which I'd prefer to avoid.
So, my guess is that the best plan would be to fill in the chips (if necessary) with epoxy and paint over it with nail polish or paint. But I don't know what would be the best match.
Has anyone tried doing this and had success with a particular type of nail polish/paint?
Thanks.
Click to expand...
Click to collapse
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
It's all kitted up into one part... the solution is a $250 front part of the phone...
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
thanks for repeating exactly what i said an hour before...
emckai said:
Repairing the bezel itself is pretty hard which is also attached to the metal frame of the phone.
You will need to heat up the screen/metal frame then take the screen off, there is a high risk you could damage the screen.
If you do so, you will need to purchase a new screen which is around $200-250
If you look on ebay, you can find some that are preassembled (screen + bezel + frame) for $250
Click to expand...
Click to collapse
Make it easier on yourself next time, kid. Just copy/paste...
Sent from my rooted Mayan calendar
littlele87 said:
did you ever find a solution to this problem? I just recently scratched my bezel on my s3 as well...
Click to expand...
Click to collapse
I looked in some drug stores for some nail polish that would match, but never found anything. It's currently in a case, so I rarely notice it. Maybe sometime when I have energy, I'll try to replace the bezel, but not for now.
Well I cracked the glass on my Galaxy S3 and there is some other superficial damage around the bezel. As I am going to be getting another phone shortly anyway I was thinking about this problem and how I could get my phone as possible to "new." After consideration I'm leaning to using an automotive paint/scratch repair pen as opposed to nailpolish. Depending on how it turns out, I'll upload my process, materials, and pictures.
Hello folks, first time on these forums.
The glass on my nexus 5 has cracked, but is completely functional. No screen distortion or damage to lower screen components. I have searched for this issue but could only find videos on how to replace the whole screen assembly. I found a replacement screen on eBay for 8.00 which is JUST the glass.
I am wondering if it is possible to replace just the glass plate and not the LCD or digitizer?
Thanks for the help!
I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com
kvillafana said:
I'll be the first to chime in here. The main reason you don't want to replace just the glass I would say is the amount of time and effort you have to put into it to remove it since it is glued directly to the LCD and there is a chance if ruining the LCD I would just replace the whole thing it is faster and much easier I get my parts from etradesupply.com
Click to expand...
Click to collapse
This seems to be the general consensus. Thanks for the response.
Alright, I did send sms on my bicycle which resulted in I did drop the phone on the ground. Luckily I had ad NILLKIN glass screen protector, which did save most of the phone . I have ordered a new Nillkin screen protector from Aliexpress. And I hope to patch up this phone so it looks good again. How would you have done ?
As you can see at the bottom in the pictures there is physically damage, you can you see the screen bleeding thru also the huwawei logo is damaged.
My idea is UNDER the NEW Nillkin screen protector I will try to mask these "holes" so the screen is not beelding thru anymore. What material should I use to patch up these holes.. also.. how to repar the logo ? can I print it out on my computer printer ? it might look **** on paper but UNDER the glass protector it might look a lot better.
All creative ideas are appreciated, I have high hopes the phone will look good again..
And hopefully my phone will surrive until the M8 release.
Just to let you know desipite the glass look damaged like this the phone is still fully functional!!
ouch i can feel with you.
How about some black film, black paper or everything else that is black and thin
Yes some black material for sure.. Black film would be perfect in guess.. Just wonder where to get it also some black glue at the sides also..
Maybe you can find a front replacement? - http://www.ebay.com/itm/New-Front-O...-Parts-For-Huawei-Ascend-Mate-7-/201270995814
http://www.ebay.com/itm/Original-Re...s-Lens-For-Huawei-Ascend-Mate-7-/141549809429
Don't put a huawei printed logo there lol it will look bad and cheap.
alexre123 said:
Maybe you can find a front replacement? - http://www.ebay.com/itm/New-Front-O...-Parts-For-Huawei-Ascend-Mate-7-/201270995814
http://www.ebay.com/itm/Original-Re...s-Lens-For-Huawei-Ascend-Mate-7-/141549809429
Don't put a huawei printed logo there lol it will look bad and cheap.
Click to expand...
Click to collapse
Nice man might be a very good alternative! But how easy is it to change it really?
Do I need a heat gun for that?
Don't know. I don't advise to do it yourself , just go with the phone to any service, I'm sure they know how to do the operation. Or maybe you have an huawei service near you.
Or...if you have the courage go for it ) - https://www.youtube.com/watch?v=nDiaQOzCvfE & https://www.youtube.com/watch?v=lUl8dCuhBGw
Joke man, don't do it yourself if you don't have experience
alexre123 said:
Don't know. I don't advise to do it yourself , just go with the phone to any service, I'm sure they know how to do the operation. Or maybe you have an huawei service near you.
Click to expand...
Click to collapse
I have done some smartphone repair myself, I changed the USB board on my old Galaxy Note 1.
I bought a smartphone repair kit with a few tools and very small screwdrivers. To change the glass is probably not much harder, but I need to know if I need a heat gun since I do not own any yet Hopefully it is not needed..but I would assume so...
I might also add the reason I bought a screen protector was that the original glass underneeth have a small crack too that goes accross the entire screen but it s quite invisible besides from certain angels.. so to change that screen to would actually be amazing..and it would make the secondary value when I sell this when M8 is released be a lot higher..
I think you need one. Look at the second yt movie at 22:34. Have an hair dryer?
https://meta.ifixit.com/Answers/View/3523/Using+a+hairdryer+instead+of+a+heat+gun
Hair Dryer vs Heat Gun
https://www.youtube.com/watch?v=9ELHDYjpLoc
If I was me I would go with the phone to a service. Anyway good to know Nilkin tempered glass do the job, I have one also on my screen
alexre123 said:
I think you need one. Look at the second yt movie at 22:34. Have an hair dryer?
https://meta.ifixit.com/Answers/View/3523/Using+a+hairdryer+instead+of+a+heat+gun
Hair Dryer vs Heat Gun
https://www.youtube.com/watch?v=9ELHDYjpLoc
If I was me I would go with the phone to a service. Anyway good to know Nilkin tempered glass do the job, I have one also on my screen
Click to expand...
Click to collapse
Yes the Nillkin glass did its job but I think I was unlucky, that the bottom of the phone got under my bicycle tire.. it felt like it...
I recommend Nillkin, IT has very good Oleophobic coating, which makes the whole device a lot more enjoyable to use, but be careful whren you put it on non 100% straight surfaces it will slip onto the floor.
Alright it is more or less decided I will buy a new front cover with glass, I will make sure to get original parts with gorilla glass. Since the ebay link you linked to are chipped from china I guess I can just order straight from alixpress instead...
I have heard singapore post have quite fast shipping compared to china post.
just one question is hard to see in the videos.. but do I really need to disassembly every component all the circuits boards just to change the front screen ? do I need to open the case at all when using the heat gun/hair dryer ?
If as in the every component and circuit board has to be disassembled it is over my competence probably... unless I am super careful..
Mutch better if you want to purchase an original front to replace it. Don,t know if you really need to take all the components of for replacing the front screen, but you can make some research on it or you can ask on other forums, maybe are others with more experience.
yes I understand..must decide tomorrow then.. because of shipping times a fast decision need to be made otherwise I will have to wait too long..
blackinfinity said:
yes I understand..must decide tomorrow then.. because of shipping times a fast decision need to be made otherwise I will have to wait too long..
Click to expand...
Click to collapse
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.
XDADEVX said:
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.
Click to expand...
Click to collapse
ehhm... good luck OP
XDADEVX said:
Man I was repairing the whole Mate7 from the scratch!
If u shattered the screen ;
1.You will need new one which cost £40-£60 2.You will have to strip the WHOLE phone which is pain!
3.You will have to open the back cover,which is very hard process.You will need hard force to pop back cover from hinges.(first you need to remove small bottom cover which is plastic.)You will have to pry it underneath is adhesive which holds that small cover firmly.
4.Once you manage to remove back cover you have to disconnect all flex cables.There are 3 black screws and 4 chrome screws(smae like two at bottom) which holds motherboard.
There is small black cover which covers all connectors and it is tricky to remove it,because left side is kind of locked under chrome metalic cover plate! You need to pry it slightly to the right to flip it upwards.Be careful! One black screw holds that small black plate!
Once you remove the motherboard, another and very very hard part awaits you!
5.Removing the battery!
You will need heat gun to remove battery but even that heat gun might ot help you to remove BIG battery without damage !!
I tried to remove battery without damage but no luck.So I will advise you to buy new battery for mate7 mine cost me just £8 from china but I had to wait almost a month to deliver! Disaster shipping from china!
So if you apply lot of heat you might be lucky remove battery without damage.
But I was scared to apply too much heat on battery it could result in explosion or fire!!!
So I rather purchased one.
Once you remove battery, you can remove bottom part of phone which is usb board with speaker and plastics. It is up to you you dont need to remove it.
6.Removing the damaged screen from (middle) supporting frame!
This can be easy depends how screen is damaged. BUT
Here you have 2 options to replace screen.
A:You can buy screen without supporting frame which is harder and more work and heat gunning around the screen and prying screen from middle frame.Needs like 30-40 seconds of heating around the screen not in the middle.
B:You can buy s reen with middle frame which is very easy.Screen is already fited in frame so you dont need to mess with very slim adhesive srtips around the screen(which I done)
Then you will have to remove all parts from middle frame. Ear speaker ,loud speaker usb board and replace it to new housing.
Once you will set the new screen you can put all parts back together..
Replacing screen for this phone is PAIN!
It really needs skills and be careful because it is very easy to scratch back cover.
Click to expand...
Click to collapse
Hello and thanks, I appreciate your detailed instructions.
But I need to say one really IMPORTANT THING
IT IS NOT THE SCREEN THAT I NEED TO CHANGE THE ACTUAL SCREEN AND LCD IS WORKING PERFECTLEY WHAT I NEED TO CHANGE IS THE Front Screen Outer Glass Lens. i HAVE HIGH HOPES THAT IF I ONLY CHANGE THIS I DO NOT NEED TO DO ALL THE INSTRUCTIONS YOU DO SINCE I AM ONLY CHANGING THE GLASS NOT THE ACTUAL SCREEN, IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT. I HOPE YOU WILL READ MY POST AND GIVE ME AN UPDATE BEFORE I PUSH THE BUY BUTTON THANKS!
This is the part I was going to order it is just the glass no lcd screen.
blackinfinity said:
Hello and thanks, I appreciate your detailed instructions.
But I need to say one really IMPORTANT THING
IT IS NOT THE SCREEN THAT I NEED TO CHANGE THE ACTUAL SCREEN AND LCD IS WORKING PERFECTLEY WHAT I NEED TO CHANGE IS THE Front Screen Outer Glass Lens. i HAVE HIGH HOPES THAT IF I ONLY CHANGE THIS I DO NOT NEED TO DO ALL THE INSTRUCTIONS YOU DO SINCE I AM ONLY CHANGING THE GLASS NOT THE ACTUAL SCREEN, IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT. I HOPE YOU WILL READ MY POST AND GIVE ME AN UPDATE BEFORE I PUSH THE BUY BUTTON THANKS!
This is the part I was going to order it is just the glass no lcd screen.
Click to expand...
Click to collapse
Sorry but you are like 10 year old child..
So u wanna change your ''front Screen Outer Glass Lens'' ??? (that is damn long name for glass )
You have so much hopes ? OK .. go on .. I leave you to it ..
I wish you very best of luck ..
''''IT IS A VERY IMPORTANT DIFFERENCE BETWEEN SCREEN AND OUTER GLASS AND FRONT''
DDDDDD this was so funny :laugh: :good:
Fingers :fingers-crossed:
You was talking about changing the lcd not only the front Glass. I just wanted to make sure you need to do all the instructions to change only front glass. The lcd is working..
blackinfinity said:
You was talking about changing the lcd not only the front Glass. I just wanted to make sure you need to do all the instructions to change only front glass. The lcd is working..
Click to expand...
Click to collapse
And I will give you one last advice ; that my detailed post above I explained you how difficult it is .. YOU want to change glass only ??
And what you think, you can just do it without stripping phone apart ?? Are you magician ? You would have to open phone anyway !
And replacing glass on your screen, do you have any idea how you gonna do it? Removing glass from LCD is x10 TIMES hard that my instructions above man !
So you basically adding even more, harder work to hard work ..!
Do you even have
1.LCD separator heat machine ??
2.Cutting line wire ??
3.Cleaning alcohol chemicals ??
4.Optical clear adhesive glue ??
5.Ultraviolet curing lamp ??
Come oon man ...
I told you I wish you very best of luck..
This guy want to do the exact same thing - https://www.youtube.com/watch?v=O8HNBtl9MwI
You have the all process here - https://www.youtube.com/watch?v=nDiaQOzCvfE & https://www.youtube.com/watch?v=lUl8dCuhBGw
Take a look and decide if you want do it yourself and risk to mess things up or go with the phone and the replacing part to a service and let someone who did this before.
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
Your best bet for a guide to follow that also has images is on the following link.
https://www.ifixit.com/Device/Samsung_Galaxy_S5
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
No, it isn't if you've never done this before.
Reasons are the next:
1. The risk to damage LCD-assembly is very high.
2. The risk to buy a non-suitable bezel (middle frame, or "rear case" how Samsung calls this part) is very high. They are different for different variants of S5 and contain different main antennas inside gray plastic.
Your best bet is to wait for a crack in the screen. You're also gonna screw up the adhesive around the screen and you could literally break keys underneath (no backlight anymore)
Unless you can pop in a nail and try to lift up the screen yourself... as it happens when device is old.
As of now new Original screen is around 100€, which is one of the best display today.
I'll just stick a case on and be done with it..just get a new charge port cover and that'll do..haha
I just installed a new charger port cover. Cost me $3.50 and took 5 minutes to install.. If you really want to change the bezel do a google search on how to do it.. There are plenty of videos which will show you the steps..
russy23 said:
Just got the s5 from a family member..great phone..the bezel is chipped quite heavily .. the replacement part seems cheap enough but I don't know if it's worth the risk..maybe just case it up and be done with it..
Click to expand...
Click to collapse
after watching several instructional videos on how to disassemble my s5, i realized its not worth it. they water-proofed the crap out of it with multiple layers of adhesive. using a heat gun to soften the glue is a pain, and can also damage the components.
if you use some kind of very soft heat gun and a "sucker" while sliding in a small credit card, you can do it. it is all about being delicate...
The bad thing to replace the bezel frame is that you have to unmount the whole phone, and at last remove the screen. It's glued to the frame with an adhesive band and it's very difficult to remove it without breaking it. And probably you'll need a new adhesive to mount it again to the frame, otherwise parts of the screen will remain elevated from the bezel.
And it's very easy to break the AMOLED screen connector between the mainboard and the screen if you don't know where it is. First, you'll have to watch several youtube vids to get to know how to disasemble the phone and where the connector is.
And if you dare to replace it and you fail, there're cheap alternatives like this: https://lltrader.com/collections/s5/products/samsung-galaxy-s5-display-assembly-no-frame but it's not an original AMOLED, it's a LCD and very fragile, keep it in mind.