So Im trying to reflash my fuze and Im having some big problems. I cant flash over the old ROM.... every time I try I get a connection error. Anyone ever run into this kind of problem? if so how do I avoid it and get around it..
I hook it up via usb cord and it connects to the computer. when I try to use the raphwrapper to update the rom it works..... goes to the rainbow screen and says something about no image. and the PC shows a connection error.
52 views and no help or input?
I think the issue is the neon rom uses some kind of GSM rom? my comp is looking for a GSM driver?
hey have you tried to hard spl your device?
try flashing with memory card
try to card flash
fomart your TF card to FAT32.
rename your rom as RAPHIMG.NBH
hold your voldown button ,reset you phone.
then follow the instruction on the screen
Related
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
thimiost said:
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
Click to expand...
Click to collapse
OK lets start at the basics...... In bootloader mode (tricolour screen) what text does it say at top of the screen?
Have you DEFINITELY Sim Unlocked and CID unlocked?
it says these things
kais130 mfg
spl-10.0.Olipof
cpld-8
Ok that confirms you have the capability to flash. I have seen in the past some people have managed to flash one time only using jumpspl but then their device reverts back to original bootloader...I was one of those people
Next question then...Can you boot the phone normally and gain an activsync connection to it?
yes
i can use my phone normally
only i cannot put a new image in
Are you using Xp or vista? If using vista it may be worth trying a reboot... sometimes it goes doolally with its usb ports. If you cannot see the phone through WMDC or activsync after a reboot it is worth going to SYSTEM (on your PC) viewing non present devices through device manager,( Drop to Command prompt and type... Devmgmt.msc set DEVMGR_SHOW_NONPRESENT_DEVICES=1 ) removing the relevant phone connection and then re attaching it so that windows re detects it.
If you can get a connection via actvisync (win XP) or WMDC (vista) to your phone then all should be ok. Uncheck the activesync/ WMDC "allow USB connections" and try again.
If this still doesn't work then search around here for MTTY. That will allow you to specify the usb connection to the device...amongst other things.
thank you for your time
i have win xp and activesync works nice
the problem is when bootloader starts
When you attempt flashing, do you do it from the device already booted into windows mobile or direct from bootloader?
Which ever way you have tried it, try ther other way.
Not teaching you to suck eggs but just in case you dont know.... To get direct to bootloader hold camera button and soft reset with stylus whilst holding camera button down and the tri colour screen should appear.
With device at the bootloader screen, Can you confirm that you hear the windows "noise" when you unplug and re plug the USB cable just as you would when plugging and unplugging the device normally. This will determine if the device has connection at the bootlaoder stage.
why not just flash using the microsd card. its much easier that way
yes it has connection
the thing is that i have already flashed as i told before with dutty's v4
now i can't
Usually Error 260's are related to the USB port functionality ( Port can't be opened etc).
The SD card method or MTTY should sort you out.
thx again
hope it works
at least the sd trick worked!!!!
now running on winmob 6.1
Glad to hear you sorted it.
almost
i cannot use my sd card cause i have to have it formated in order to put a new rom in
thimiost said:
i cannot use my sd card cause i have to have it formated in order to put a new rom in
Click to expand...
Click to collapse
disable USB connections in ActiveSync and flash.
This Link gives a list of eror codes for Hermes, and probably the same for Kaiser.
It's likely that you have a USB port error - maybe try changing the USB port you use or a different sync cable - or just stick to SD card flashing in the future - I keep an old 1gig card for this.
this IS the problem...i cannot flash...
it stays in the bootloader with the message i wrote
thimiost said:
it stays in the bootloader with the message i wrote
Click to expand...
Click to collapse
It happen to me before hardspl again fix it, not sure why
you mean use the sd method to do hardspl again?
OHHH lord dutty we need your new rom
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
hey i got an x7510. and running hard spl from the pc while the phone is connected isnt working properly. after the bootloader starts on the phone the phone looses connection with the pc and after 1% doesnt reconnect and i get and error on my laptop saying that image file is corrupt :S..how do i work around this??
i have the same problem
did find any solution for it?
i have been trying to solve it for about 2 years
i hope you can help
Hey there, I have the same problem, when powered up, screen is black.
If I enter bootrom, all is OK, tried many different roms, some bomb out at 1%, otheres get to 99% then say file is corrupt?
Any genius able to offer some form of incite?
Take out the memory card.
Hey Vico,
No memory card in the device. Was the first thing I checked
I believe you can put a rom onto the sd card, just search around.
My phone is T-mobile Wing Hera110 with IPL:4.26.0002 and SPL:4.26.0000.
I flashed succesfully my phone with a cooked herald rom with USPL (flash center) and worked ok.
When i tried to do same thing again for bad luck the phone disconnected from cable and after this the battery came off during the flashing procedure.
Now the phone can only show the bootloader (red,green,blue) image and nothing else.
I tried with originals roms that i downloaded from here and i get 270 error or 294 error.The roms were not corrupted i beleive.
What can i do to flash again my phone with original or anything ????
Thanks a lot guys and keep the good work!
Follow my GUIDE to get things right again..
Every time i try to flash my phone with TMo_Wing_RUU_Update_4.26.531.4.exe i get an ERROR [294] and procedure stops to 1%.
why?what is my mistake?Also i tried to boot from flash card (2GB) the .nbh and nothing!I also renamed the file as HERAIMG.NBH
silicon* said:
Every time i try to flash my phone with TMo_Wing_RUU_Update_4.26.531.4.exe i get an ERROR [294] and procedure stops to 1%.
why?what is my mistake?Also i tried to boot from flash card (2GB) the .nbh and nothing!I also renamed the file as HERAIMG.NBH
Click to expand...
Click to collapse
look , just try different roms and would you tell me what is your PC OS ??? some windows like 7 need to get the USB driver from internet to let the pc know the ppc as an external usb device , so make sure the icon above near the clock that says "remove safty appears to make sure they are both connected.you did not brick your phone as far as you see the three color screen shows up, check the things i mentioned and keep me update
i encountered the same problem somehow and i could not flash through flashcenter so i tried to flash with SD memory and it worked for me , make sure the name of the rom is right and also try flashing with another sd memory ,the last step i know is http://forum.xda-developers.com/showthread.php?t=417930
I use pc with windows xp sp2 and a small icon that says "remove safty" appears when the phone is connected. I tried many official roms like (TMo_Wing_RUU_Update_4.26.531.4.exe,HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe,T-Mobile Wing Software_4.26.531.1.exe,RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe,RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe ) and i get error in 1% or 2% .
I would like to test the goldcard method but when i tried to make one i had problems with perl pakages..
(I have 1GB mikrosd card..)
Need a 256MB or Less card that is formatted via Windows. I posted a pic here:
http://forum.xda-developers.com/showthread.php?t=561086&page=16/#155
Tribulattifather said:
Need a 256MB or Less card that is formatted via Windows. I posted a pic here:
http://forum.xda-developers.com/showthread.php?t=561086&page=16/#155
Click to expand...
Click to collapse
thats nice ,just try this , also i suggest u use custom roms if you can, always use hardspl as far as it helps you doge bricking the phone , you did not bricked your phone just try
Finaly my phone is up and running again after 2 months.I used the goldcard method and worked for me.I tried anything else you told me and nothing worked in 2 different pc's.Thanks for your help guys and keep the good work.
i have same problem ^^ (fixed) i fix this problem for try rooms i fixed 3 day
trying to flash my fuze windows 6.1 to exquisite v4.24 and when i go though the steps and get to where its at zero percent and my phone restarts to the red green blue screen it disconnects from the pc and stops the flashing..can anyone please help would appreciate it alot.
none?
does noone have a answer? please let me know how to fix this or what im doing wrong..tried microsd way and it just freezes on loading
Aside from making sure you are flashing the right ROM toy our device, no idea as to what the problem is. Make sure you have a GSM ROM if you are flashing a GSM device or a CDMA ROM for a CDMA device.
Additionally, the way I usually flash is I remove the battery, SIM and microSD. Then I connect the cable to the computer and while I hold the volume down key, I connect the cable to the device and I see the multi-color screen. From there, I run the executable file to flash the device. I have an at&t Fuze, which is a GSM device. I have the ROM in my sig/signature flashed to my device.
I had a similar problem and what I did was I uninstalled and then reinstalled windows mobile device center. Dont know if that will help...
dont work
my computer wont reconize it when its at the 3 color screen....is there anything i should do before i try to flash like anything i need to have on my device for it to work?
To flash ones device(if GSM)
This is what "I" do each time when I flash a custom ROM:
Remove the battery, SIM and microSD
(Using a working USB cable)I connect the USB cable to my device
(Using a working USB port and computer)I hold the device's volume down key while I connect the USB cable to the computer
Run the flashing utility of choice
NOTE If this is the first time you've connected your device in this manner, your computer should detect a new device. If it doesn't then this falls outside of my knowledge as it is difficult for me to troubleshoot your computer from my end.
You could also try to put your nbh file in the root of your SD card, make sure it is named RAPHIMG.NBH, then when you enter bootloader mode the bootloader itself will look for it and try to flash it. It may not be a permanent solution, but it should work.