hey i got an x7510. and running hard spl from the pc while the phone is connected isnt working properly. after the bootloader starts on the phone the phone looses connection with the pc and after 1% doesnt reconnect and i get and error on my laptop saying that image file is corrupt :S..how do i work around this??
i have the same problem
did find any solution for it?
i have been trying to solve it for about 2 years
i hope you can help
Hey there, I have the same problem, when powered up, screen is black.
If I enter bootrom, all is OK, tried many different roms, some bomb out at 1%, otheres get to 99% then say file is corrupt?
Any genius able to offer some form of incite?
Take out the memory card.
Hey Vico,
No memory card in the device. Was the first thing I checked
I believe you can put a rom onto the sd card, just search around.
Related
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
I need help fixing my evo... it doesnt charge with the usb cable unless its off and it does not read the sd card. It says sd card removed install a new one. i installed a new one and got the same message. When i go into bootloader a dark green screen comes on and on the top it says clockwork recovery v2.0.1.0 i did a nand back up of the old rom but i cant get to it because the phone does not read my sd card. it basically wont mount to the phone so i cant do a recovery. i know the phone isnt bricked bcuz i can still use it and charge it when its off. if anyone can help with this issue please let me know.
one more thing when i attach it to the pc i get this message.. qualcomm cdma tech.. msm. driver needed and i get android 1.0 driver needed as well
issue resolved, went to where i bought and got another one.. learned the hard way there is no fix for this
My phone is T-mobile Wing Hera110 with IPL:4.26.0002 and SPL:4.26.0000.
I flashed succesfully my phone with a cooked herald rom with USPL (flash center) and worked ok.
When i tried to do same thing again for bad luck the phone disconnected from cable and after this the battery came off during the flashing procedure.
Now the phone can only show the bootloader (red,green,blue) image and nothing else.
I tried with originals roms that i downloaded from here and i get 270 error or 294 error.The roms were not corrupted i beleive.
What can i do to flash again my phone with original or anything ????
Thanks a lot guys and keep the good work!
Follow my GUIDE to get things right again..
Every time i try to flash my phone with TMo_Wing_RUU_Update_4.26.531.4.exe i get an ERROR [294] and procedure stops to 1%.
why?what is my mistake?Also i tried to boot from flash card (2GB) the .nbh and nothing!I also renamed the file as HERAIMG.NBH
silicon* said:
Every time i try to flash my phone with TMo_Wing_RUU_Update_4.26.531.4.exe i get an ERROR [294] and procedure stops to 1%.
why?what is my mistake?Also i tried to boot from flash card (2GB) the .nbh and nothing!I also renamed the file as HERAIMG.NBH
Click to expand...
Click to collapse
look , just try different roms and would you tell me what is your PC OS ??? some windows like 7 need to get the USB driver from internet to let the pc know the ppc as an external usb device , so make sure the icon above near the clock that says "remove safty appears to make sure they are both connected.you did not brick your phone as far as you see the three color screen shows up, check the things i mentioned and keep me update
i encountered the same problem somehow and i could not flash through flashcenter so i tried to flash with SD memory and it worked for me , make sure the name of the rom is right and also try flashing with another sd memory ,the last step i know is http://forum.xda-developers.com/showthread.php?t=417930
I use pc with windows xp sp2 and a small icon that says "remove safty" appears when the phone is connected. I tried many official roms like (TMo_Wing_RUU_Update_4.26.531.4.exe,HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe,T-Mobile Wing Software_4.26.531.1.exe,RUU_Atlas_TMO_US_4[1].10.531.3_4.1.13.37_02.83.90_Ship.exe,RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe ) and i get error in 1% or 2% .
I would like to test the goldcard method but when i tried to make one i had problems with perl pakages..
(I have 1GB mikrosd card..)
Need a 256MB or Less card that is formatted via Windows. I posted a pic here:
http://forum.xda-developers.com/showthread.php?t=561086&page=16/#155
Tribulattifather said:
Need a 256MB or Less card that is formatted via Windows. I posted a pic here:
http://forum.xda-developers.com/showthread.php?t=561086&page=16/#155
Click to expand...
Click to collapse
thats nice ,just try this , also i suggest u use custom roms if you can, always use hardspl as far as it helps you doge bricking the phone , you did not bricked your phone just try
Finaly my phone is up and running again after 2 months.I used the goldcard method and worked for me.I tried anything else you told me and nothing worked in 2 different pc's.Thanks for your help guys and keep the good work.
i have same problem ^^ (fixed) i fix this problem for try rooms i fixed 3 day
So Im trying to reflash my fuze and Im having some big problems. I cant flash over the old ROM.... every time I try I get a connection error. Anyone ever run into this kind of problem? if so how do I avoid it and get around it..
I hook it up via usb cord and it connects to the computer. when I try to use the raphwrapper to update the rom it works..... goes to the rainbow screen and says something about no image. and the PC shows a connection error.
52 views and no help or input?
I think the issue is the neon rom uses some kind of GSM rom? my comp is looking for a GSM driver?
hey have you tried to hard spl your device?
try flashing with memory card
try to card flash
fomart your TF card to FAT32.
rename your rom as RAPHIMG.NBH
hold your voldown button ,reset you phone.
then follow the instruction on the screen
So sad. Just bought this phone. I tried to upgrade to ICS via but used the Galaxy S firmware (gti9000) by mistake...turns out ICS isn't out yet for my phone, the SPHD710. While flashing I managed to upload the "modem" file but when it was writing the file (it says "wait 2 minutes for write") odin froze.
and now..
Here's the situation. The phone will boot into the gti9000 firmware (i.e I get to home screen--so I think I'm semi-bricked), but WiFi won't work and the phone crashes a lot. Basically like a "safe-mode". Here are the conditions I'm dealing with
1) Windows 7 will not recognize phone when plugged in. It charges but does not show up in device manger
2) Odin does not recognize the phone at all. It was recognized for a split second on my laptop when I was installing/reinstalling drivers. Can't replicate this.
So basically I'm stuck. I tried going into recovery mode and applying update from SDcard (to revert to stock) but i the SD card won't mount
Anybody help??? PLEASE. I don't want a $500 paperweight.
I can give as many details as you like.
Thanks so much!