Database Info

Cant Upgrade Error 264

Hi there,
i cant upgrade my phone. i get an error 264.
i even hardresetted the phone and tryed.
when i start the "hardspl.bat" my mobile wants to run a jumper file. but when i press yes the screen turns white the connection brakes and i cant upgrade too.
and when i dont press yes and do nothing the updater starts but its stock at 0% and after some time i get the error o0
what have i done wrong ?
greetings
sluppy

same thing happens here, my usb connection losts while whitescreen loaded, i will try with another computer tomorrow...
by the way bootloader way doenst work, i have tryed several times, several roms, it has just come back from service due to speaker problem...
G4
OS 2.20.7.34
Qtek s200

so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.

sluppy said:
so i can get into the 3 colored screen if i dont press yes when i am asked if i want so start the jumperspl. if i dont press anything the screen gets into 3 colors. but i get an error on the PC and i can do anything. but it seems that the usb connection is still running.
Click to expand...
Click to collapse
Please read the thread in my signature...
be patient ~~~ only less than half an hour to complete flashing........
download all needed files first~~~~

What is yr PC oS
I have d same error in win XP and Vista.
Try use win 2000.
I solved my using win2000.

its just not working! i copied the jumperfiles, i plugged the phrophet i run the spl i plugged the propeht in again and when i run the update thing i get an error.

it is me again
it has done today, i hav triyed again with my old notebook at work today and it's succeded, it think my home computer's mainboard have a sumething like usb connection problem.
I will try later with rear USB ports

i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method

sluppy said:
i tryed it on a nother maschine and its not working. same error. and i 100% did whats described in the threats! every available method
Click to expand...
Click to collapse
not about PCs, read again my thread ... is that you have a G4 device?
go to my signature again. Many successful cases.....................

yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working

sluppy said:
yes its a g4 and i read ure thread. and tryed it serveal times. but its just not working
Click to expand...
Click to collapse
read more
http://forum.xda-developers.com/showpost.php?p=1937273&postcount=103

okay i think i found the error ... i had windows runnin on my mac with a virtuall mashine and it wasnt able to connect virtual windows with the bootloader.
but i got an other error now. if i run hardspl, i everything seems to run find. but its still the old 2.15 hard spl on the prophet even if its supposed to be a 2.20.
do i have to crack some kind of romlock befor? (its a german o2 XDA)
oh okay do i have to unlock the CID? i searched the prophet forum but didnt find anything specific.
-> http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock is G4 only :/

Hey guys,
i had the same error and i tried just the same one more time, so romupdateutility.exe and it worked!!

error codes and its definition
this might help to define those error codes... got it in one of the files i downloaded from this forum...
sometimes README helps )

Can't flash ROM : no connection via ActiveSync and bootloader won't work_ HELP

Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE

I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?

TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.

be sure that battery over 50% then follow arupphental's

I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...

I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.

I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English

X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d

A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.

I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM

While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527

longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.

ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)

Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.

hard spl problems :S!

hey i got an x7510. and running hard spl from the pc while the phone is connected isnt working properly. after the bootloader starts on the phone the phone looses connection with the pc and after 1% doesnt reconnect and i get and error on my laptop saying that image file is corrupt :S..how do i work around this??

i have the same problem
did find any solution for it?
i have been trying to solve it for about 2 years
i hope you can help

Hey there, I have the same problem, when powered up, screen is black.
If I enter bootrom, all is OK, tried many different roms, some bomb out at 1%, otheres get to 99% then say file is corrupt?
Any genius able to offer some form of incite?

Take out the memory card.

Hey Vico,
No memory card in the device. Was the first thing I checked

I believe you can put a rom onto the sd card, just search around.

HTC HD2 stuck on "Loading..." screen when downgrading

Well, I've updated few htcs before and everything went fine. But there's always the first time...
I upgraded my htc hd2 spl 1.42.0000 to hspl2, wanted to upgrade rom/radio too, but couldn't find any rom I do like, and then I got no more leisure to play with it. So there was only hspl2 replaced on the device and that's it. Everything was fine for a month or two, then suddenly the phone function stopped to work (couldn't register into network anymore). Wanted to send back to factory for repair, but to avoid warranty loss I wanted to downgrade the hspl to stock spl. Downloaded stock image at htc site (was 1.48.something), did everything exactly in a way described in the video tutor, and - got stuck on light gray "Loading..." screen after the colourful one, and nothing more. Tried to update ROM via activesync for test, got stuck at 0% and that's it (although the connection is fine), googled a lot, browsed a lot of xda-dev... still nothing useful found.
Technical info + what shows in the colourful screen:
Eastern Europe HTC HD2
PB81100 HX-BC
SPL-2.08.0000 8G XE
I would really appreciate if someone could tell me, what it is, and how to fix it!
Thank you in advance.

I believe when you did the original HSPL, you selected the wrong version. The SPLs that end with '.0000' are the stock ones. Assuming the HSPL was done correctly it should read "2.08.hspl". Try flashing HSPL again, this time select .hspl, then flash your ROM. Should be good to go.
Edit: When people say you need a stock SPL to send it in for warranty, Im not sure if you need the exact same one it came with or not. Because you basically just reflashed a stock one anyway, you might be able to just send it in for repairs as is, but Im not 100% on that.

donkeypunch85 said:
Try flashing HSPL again
Click to expand...
Click to collapse
Thanks for the tip and trick. Unfortunately, like I said this doesn't help, cause flashing doesn't work. Tried hspl2 and hspl3 as well. The screen turns 3-color, then gray "Loading..." like it was when flashing from sdcard, and stucking on it...
When installing hspl3, the software on the computer says (while having that "Loading..." screen on the phone):
CRITICAL ERROR
Flow: 00000001
Error code: 00000002
Description: USB Connect failed!
(although ActiveSync shows connected and sync/exploring runs fine)
I'm becoming really unhappy with this one.

What OS is on your PC? Are you making sure Anti-Virus is disabled before flashing? If Win7 right click on the HSPL and choose 'run as admin'. Your using a USB slot on the rear (main motherboard) of your PC and not one of the front ones right?

It suddenly started to work today. I have no idea, what happened, did the same steps as before. The GSM function is still broken, but now, as the flashing worked finally, I'm able to send it back for repair without a risk to lose warranty. Mystical.
Thanks anyway for your time and willing to help.

...had the same these days on an HD2 which I successfully up-/downgraded at least half a dozen times before.
Did the MTTY 29 thing (again, surely the 6th time, never had any problem before) and afterwards had the issue you describe.
What helped me was re-flashing the HardSPL. Afterwards all worked 'as usual'.
Hope that helps others, Franky

Ok
and if my usb plug is broken?
I can't flash from sd, because it stops on the 'loading...' screen. I even tried the gold card method and still stuck on 'loading...'.
Wat's even worse my current system is rather unstable and WM sees only 208mb of ram...
Any suggestions?

T-mobile HD2! Problem Flashing rom
Hi Guys,
I'm a new guy in this great site, because I bought a T-mobile HD2 recently, via china, and it's not a fake!!!
But I want to update its rom to put the android2.2 's system.
I have tried several methods find in this site. But during the rom's flash, my phone shutdown and the connexion between Pc and phone switch off.
The phone is only in sleep mode and not off.
Can you help me to resolve this problem?
My system :
Phone :
Not SPL on the bootloader (only tri color) and this message :
" Error :
Copying file from SD card failed.
The system will shut down"
OS : Windows mobile 6.5 Professionnel
Software version : DUMA.10X.W10.20.P29
Protocol Stack (software) version :
MAUI.09B.W10.16.MP.V5, 2010/06/07
Dual Sim, and no take off SD card storage
Rom version : v01.00
Rom Date : Sep 10 2010
Boot version 2010 08 01
PCB version v01
Model ID T8585 (Leo)
Manufacturer HTC
CPU QUALCOMM 8250B (1024 MHz)
Ram Size 576 Mb
Nand Size 1024 Mb
Data bus 32 bit
Memory CPU 194 Mo
Memory storage 385 Mo
Memory inside SD card storage 7362 Mo
PC :
OS Windows XP SP2
ActivSyn4.5 Ok, but not synchronization with outlook, but connexion between PC and phone is OK.
Use update Rom Flash : Rom T-mobile v3.14 (run OK, no problem until progress bar (phone in sleep mode).
I tried SD card's method, unless sucess.
I used qmax to find SD card's number. But the memory's value is 3,5 Gb and not 7,3G.
Well, I think, I have forgot anything!
Thanks for your help!
Best regard

If you can get to the bootloader (four color stripes) then do so and then connect the phone to the PC. Wait until word 'serial' changes to 'USB'. Then start update on the PC (normally click the _RUU_(...).exe and follow the steps).
If fails please write at what point.

htc hd2
tomus said:
If you can get to the bootloader (four color stripes) then do so and then connect the phone to the PC. Wait until word 'serial' changes to 'USB'. Then start update on the PC (normally click the _RUU_(...).exe and follow the steps).
If fails please write at what point.
Click to expand...
Click to collapse
it fails at 8%.

Help me get out of this situation, Pls help me if u know how to get out of this probl

I've sensation Xe which has problem. This device was given me as a gift from one of my friend.
The main problem with this device is pc doesnot recognize it. I've tried with 3 pcs, different cables, factory reset,
changed micro sd card, checked the device in usb mode, checked ask me before connecting device etc, i mean every possible
solutions out there.. My main concentration is even when i try new pc there is no response from pc like any sound or like
installing driver for pc.
The device charges through usb. I've installed latest htc sync for my device.
I've heard about usb bricking but i don't know whether it is related to my problem,. Every thing ,except connection with pc , is
working fine.
And other thing is my phone is s-on, unrooted, locked bootloader, lates ics 4.0.3, 1.27.00, stock recovery.
My phone is never rooted or unlocked , so my guess is my friend updated to ics through ota.
Now beside solution to above related problem , it'll be kind if anyone help me with a guide to
flash custom rom, it may help to sort my problem. Pls remember to flash custom rom
i need to do something before like unlock bootloader s-off etc. As usb is not working in my device, so i think
flashing custom rom in my situation is little difficult. please help me to get ot of this problem.
Sorry for my bad englist as english is not my mother tounge.

You could always put the sdcard into a card reader or another phone, copy the files across then apply the update? Could be a corrupt MISC partition (IIRC) this used to happen on the Legend.
To apply an update you would have to extract rom.zip from a RUU. To do this you need to download a RUU and run it (with no phone connected) open task manager on windows (CTRL+SHIFT+ESC) look out for ARUwizard.exe, go through the RUU clicking next untill the ARUwizard pops up then right click it, choose open file location and scroll down to ROM.zip copy this file to desktop. Rename it to PG58IMG.zip make sure its not PG58IMG.zip.zip as that wont work. Copy to sdcard then turn phone on using power and volume down, it will scan the sdcard (hopefully) find the file and start updating. A reflash could well repair the problem

zimage20 said:
I've sensation Xe which has problem. This device was given me as a gift from one of my friend.
The main problem with this device is pc doesnot recognize it. I've tried with 3 pcs, different cables, factory reset,
changed micro sd card, checked the device in usb mode, checked ask me before connecting device etc, i mean every possible
solutions out there.. My main concentration is even when i try new pc there is no response from pc like any sound or like
installing driver for pc.
The device charges through usb. I've installed latest htc sync for my device.
I've heard about usb bricking but i don't know whether it is related to my problem,. Every thing ,except connection with pc , is
working fine.
And other thing is my phone is s-on, unrooted, locked bootloader, lates ics 4.0.3, 1.27.00, stock recovery.
My phone is never rooted or unlocked , so my guess is my friend updated to ics through ota.
Now beside solution to above related problem , it'll be kind if anyone help me with a guide to
flash custom rom, it may help to sort my problem. Pls remember to flash custom rom
i need to do something before like unlock bootloader s-off etc. As usb is not working in my device, so i think
flashing custom rom in my situation is little difficult. please help me to get ot of this problem.
Sorry for my bad englist as english is not my mother tounge.
Click to expand...
Click to collapse
Hi,
You can flash custom ROM with s-on.
Look HERE
Try installing THESE DRIVERS then see if your pc recognizes your phone.
Check my signature for many links to s-offing ,if you want to go that way.

bonesy said:
You could always put the sdcard into a card reader or another phone, copy the files across then apply the update? Could be a corrupt MISC partition (IIRC) this used to happen on the Legend.
To apply an update you would have to extract rom.zip from a RUU. To do this you need to download a RUU and run it (with no phone connected) open task manager on windows (CTRL+SHIFT+ESC) look out for ARUwizard.exe, go through the RUU clicking next untill the ARUwizard pops up then right click it, choose open file location and scroll down to ROM.zip copy this file to desktop. Rename it to PG58IMG.zip make sure its not PG58IMG.zip.zip as that wont work. Copy to sdcard then turn phone on using power and volume down, it will scan the sdcard (hopefully) find the file and start updating. A reflash could well repair the problem
Click to expand...
Click to collapse
Thank u genius xda member , u saved my life , now my mobile is detected by computer.

Sweet glad to be of help
One other thing... On the how to flash with S-ON that was posted....
Requirements:
Your phone
USB Connector
Backup of your phone's conent
A brain
Click to expand...
Click to collapse
USB wasn't working so it couldn't have been done