trying to flash my fuze windows 6.1 to exquisite v4.24 and when i go though the steps and get to where its at zero percent and my phone restarts to the red green blue screen it disconnects from the pc and stops the flashing..can anyone please help would appreciate it alot.
none?
does noone have a answer? please let me know how to fix this or what im doing wrong..tried microsd way and it just freezes on loading
Aside from making sure you are flashing the right ROM toy our device, no idea as to what the problem is. Make sure you have a GSM ROM if you are flashing a GSM device or a CDMA ROM for a CDMA device.
Additionally, the way I usually flash is I remove the battery, SIM and microSD. Then I connect the cable to the computer and while I hold the volume down key, I connect the cable to the device and I see the multi-color screen. From there, I run the executable file to flash the device. I have an at&t Fuze, which is a GSM device. I have the ROM in my sig/signature flashed to my device.
I had a similar problem and what I did was I uninstalled and then reinstalled windows mobile device center. Dont know if that will help...
dont work
my computer wont reconize it when its at the 3 color screen....is there anything i should do before i try to flash like anything i need to have on my device for it to work?
To flash ones device(if GSM)
This is what "I" do each time when I flash a custom ROM:
Remove the battery, SIM and microSD
(Using a working USB cable)I connect the USB cable to my device
(Using a working USB port and computer)I hold the device's volume down key while I connect the USB cable to the computer
Run the flashing utility of choice
NOTE If this is the first time you've connected your device in this manner, your computer should detect a new device. If it doesn't then this falls outside of my knowledge as it is difficult for me to troubleshoot your computer from my end.
You could also try to put your nbh file in the root of your SD card, make sure it is named RAPHIMG.NBH, then when you enter bootloader mode the bootloader itself will look for it and try to flash it. It may not be a permanent solution, but it should work.
Related
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
thimiost said:
I have flashed dutty's v4 rom and i want to change it
the problem is that when i try to do so i run
KaiserCustomRUU
my device goes into the 4 stripes screen it says usb
but then the program in the pc says error 260 and doesn't load the new rom
my phone still works as dutty's rom is still in but what can i do to change it?
Thank you and i have searched a lot but could not find a solution
Click to expand...
Click to collapse
OK lets start at the basics...... In bootloader mode (tricolour screen) what text does it say at top of the screen?
Have you DEFINITELY Sim Unlocked and CID unlocked?
it says these things
kais130 mfg
spl-10.0.Olipof
cpld-8
Ok that confirms you have the capability to flash. I have seen in the past some people have managed to flash one time only using jumpspl but then their device reverts back to original bootloader...I was one of those people
Next question then...Can you boot the phone normally and gain an activsync connection to it?
yes
i can use my phone normally
only i cannot put a new image in
Are you using Xp or vista? If using vista it may be worth trying a reboot... sometimes it goes doolally with its usb ports. If you cannot see the phone through WMDC or activsync after a reboot it is worth going to SYSTEM (on your PC) viewing non present devices through device manager,( Drop to Command prompt and type... Devmgmt.msc set DEVMGR_SHOW_NONPRESENT_DEVICES=1 ) removing the relevant phone connection and then re attaching it so that windows re detects it.
If you can get a connection via actvisync (win XP) or WMDC (vista) to your phone then all should be ok. Uncheck the activesync/ WMDC "allow USB connections" and try again.
If this still doesn't work then search around here for MTTY. That will allow you to specify the usb connection to the device...amongst other things.
thank you for your time
i have win xp and activesync works nice
the problem is when bootloader starts
When you attempt flashing, do you do it from the device already booted into windows mobile or direct from bootloader?
Which ever way you have tried it, try ther other way.
Not teaching you to suck eggs but just in case you dont know.... To get direct to bootloader hold camera button and soft reset with stylus whilst holding camera button down and the tri colour screen should appear.
With device at the bootloader screen, Can you confirm that you hear the windows "noise" when you unplug and re plug the USB cable just as you would when plugging and unplugging the device normally. This will determine if the device has connection at the bootlaoder stage.
why not just flash using the microsd card. its much easier that way
yes it has connection
the thing is that i have already flashed as i told before with dutty's v4
now i can't
Usually Error 260's are related to the USB port functionality ( Port can't be opened etc).
The SD card method or MTTY should sort you out.
thx again
hope it works
at least the sd trick worked!!!!
now running on winmob 6.1
Glad to hear you sorted it.
almost
i cannot use my sd card cause i have to have it formated in order to put a new rom in
thimiost said:
i cannot use my sd card cause i have to have it formated in order to put a new rom in
Click to expand...
Click to collapse
disable USB connections in ActiveSync and flash.
This Link gives a list of eror codes for Hermes, and probably the same for Kaiser.
It's likely that you have a USB port error - maybe try changing the USB port you use or a different sync cable - or just stick to SD card flashing in the future - I keep an old 1gig card for this.
this IS the problem...i cannot flash...
it stays in the bootloader with the message i wrote
thimiost said:
it stays in the bootloader with the message i wrote
Click to expand...
Click to collapse
It happen to me before hardspl again fix it, not sure why
you mean use the sd method to do hardspl again?
OHHH lord dutty we need your new rom
Hello,
I'm realy going insane at the moment.
I try to degrade the SPL from SPL-1.0.OliPof (KAIS130 MFG, CPLD-8 <- whatever that means) back to the orginal one.
What I'm doing is:
1. connect the kaiser without sd card and sim card via active sync to my XP PC.
2. start the bootloader via button and stylus.
3. unplug the usb cable and replug
4. starting the KaiserCustomRUU tool.
the problem is that I always get an error 260 which means that there is no connection between pc and pda. by the way I already tried every possible solution mentioned in this forum.
What i figured out is that after I repluged the usb cable the computer detects the pda but is not able to install a suitable driver. So I have an unrecognized usb device in the device manager. I guess this is the issue but does anybody know how to solve it. I mean which driver is needed in this state?
can anybody help?
greetings,
macx
I must be misreading your post... you don't mention running JumpSPL/SSPL. If you're not doing that, then there's you freebie for the year, and also the solution to your problem.
sorry, my fault.
Point 2 is running SSPL of course. Version 1 leads to a white screen and the other two versions bring up the bootloader.
In the meanwhile I tried so many things that I was a bit confused when I wrote this post.
nevertheless I don't know what to do anymore to make it work.
Hi there, I tired to issue my problem in some other threads, but without any response so far - probably my problem is more specific.
I was using AHEN 6.5-R6i Rom for few weeks when some time after charging my Raphael was not powering up at all. I presume no relation between Ahen rom and the problem (as described further).
I bought new battery and it occurred that probably power charging circuit was damaged, because it newer completed charging, the device was always very hot and discharged in few minutes even when turned off (until completely drained out). What is more the USB connector works only for charging (maybe damaged data connection circuit?).
As a result, before returning the device for guarantee servicing I wanted to downgrade all the roms to the original ones. As advised I started with Radio and OS stocks, but after bootloader update (from SD card, cause my USB doesn't work) I got only "upgrading ROM code error" and the device tries to load some ROM, but putting any on SD card doesn't work anymore.
Any suggestions how to cope with this situation?
If you need help please provide us with important information. So fill your signature first. Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now. Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM. But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock. Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
If you need help please provide us with important information. So fill your signature first.
=> done
Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now.
=> chnged SPL to OliNex, OS to AHEN 6.5-R6i, Radio to version required by AHEN rom
Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM.
=> I retracked the changes as indicated changing both radio and OS to original ones, but had just problem at last step = flashing oryginal SPL (because I made it from SD).
But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock.
=> Hmm, anyway right now I am stack because bootloader is "loading ..." every time I reboot the device.
Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
=> I tried to use some terminals to see if I can execute commands directly or see any output, but I haven't even succeeded to open the port. Maybe I am doing something wrong - I give it a try once more tonight.
So what version of SPL is bootloader showing? If it's showing something like 1.90.0000, you are in bootloader and USB circuit is not damaged you should be able to normaly flash ROM from your provider from bootloader. So download the ROM from your T-Mobile it should be some exe. When you see bootloader tricolor screen coonect usb cable from Touch Pro to computer and run the exe soubor with your desired ROM. It should work if everything is OK!
If your device is showing 1.90.OliNex, than i cant help you because i do not know how to remove Hard-SPL from bootloader, maybe it is possible, but for more experienced tech guy, who i am not
PS: Hope you did not bricked your device because Hard-SPL and removing Hard-SPL is all done with cable, you cant do it from SD, and you cant flash original SPL before removing Hard-SPL!
hmm, it seems that I have managed to flash, at least partly, the original SPL from SD card, cause it shows version 1.90.0000. Partly, because it states that the previalus rom update was not successful :-(
In this state (in boot loader mode) I can't even charge battery so I have to do it externaly. Connecting to PC doesn't work (PC USB and cable are fine). The only thing that change after connecting to USB charger is that device gets hot ...
i am sorry to say, that you probably bricked your device... Maybe someone could help with more advanced hardware, software support, but i am not the right person...You can try to put your device to service and hope they will not recognize what have you done, but it depends on your stock SPL version. I got czech T-Mobile and stock SPL was 1.69.0000, so maybe yours was the same...
Next time please read more carefully, search or ask someone if you are not still sure, things about flashing SPLs are very dangerous if they are not done carefully...
Can anyone help this guy? He tried to flash original SPL over Hard-SPL, and therefore it is not looking very well for him to unbrick his Touch Pro...
So ... I got it from the service and they changed the motherboard and the battery, no charges
It was brickes, because of cherging circuit issue.
Unfortunatley I send it back to service, because the loudspeaker is not working ...
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
riotburn said:
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
Click to expand...
Click to collapse
You can flash the ROM, radio, splash screens etc etc from SD card - you will then have to send the phone back with hard spl still installed as you need a usb connection to remove it.
Dont assume you cant get a usb data conenction though - try it and see!
I did try the connection, didn't work. How do you flash from the sdcard? I just dont want to brick it.
Please read this thread on how to flash (including how to flash from SD card).
Again, (assuming you have the correct hard SPL currently flashed) you can flash a ROM, radio & splash screens etc to your phone from the SD card (one at a time) but as previously said you need a USB connection to flash hard spl (dont attempt it from the sd card).
So, my Raphael arrived from service after the second repair (loudspeaker not working) - it seems all works this time
By the way, that is correct that a USB connection is necessary to flash hard spl, but .. I was desperate because the USB was broken, so I tried it from SD. The effect was good enough for the service - the Hard-SPL seemed to be reverted to oryginal one, however the booting was stacked at loading the ROM
So Im trying to reflash my fuze and Im having some big problems. I cant flash over the old ROM.... every time I try I get a connection error. Anyone ever run into this kind of problem? if so how do I avoid it and get around it..
I hook it up via usb cord and it connects to the computer. when I try to use the raphwrapper to update the rom it works..... goes to the rainbow screen and says something about no image. and the PC shows a connection error.
52 views and no help or input?
I think the issue is the neon rom uses some kind of GSM rom? my comp is looking for a GSM driver?
hey have you tried to hard spl your device?
try flashing with memory card
try to card flash
fomart your TF card to FAT32.
rename your rom as RAPHIMG.NBH
hold your voldown button ,reset you phone.
then follow the instruction on the screen
Hello,
I'm working with the stock ROM 4.0.3 and HTC sense 3.6.
yesterday, I got an official update from HTC to SW 3.33.415.51. After I did this update, my phone started behaving abnormally.
1- Location application opens whenever I reboot or connect my USB cable to my computer.
2- The connect to PC options don't popup anymore when I connect my USB cable, nor can I select the phone to act as a "Disk Drive".
Along with other bugs like the speaker turning ON automatically when I answer phone calls, but I only care about the problem of connecting my phone as a disk drive... It prevents me from doing anything (bootloader, customized ROM,....etc).
The thing is, when I connect my USB cable, the location service opens instead of the connect to PC options popup, so I don't know if this is the cause of the problem, something causes the location service to open instead of the connect to PC options.
I tried the following:
1- Reset to factory settings.
2- different cables and SD cards and laptops.
3- I can read the SD card using file manager.
4- I can't even unlock the bootloader and put a new custom ROM, cause when connecting the phone to PC via USB cable and reboot on boatloder mode, it can't feel it, and the phone shows fastboot AC (not USB). and whatever commands I enter in the cmd, it is not executed cause the phone is not connected.
I've searched all the WEB and can't find a solution. I appreciate your support. The PC connection was working fine before this update so I doubt (or wish) it is not a hardware problem.
will re-installing PCSC.APK fix that? does anyone have this apk for sensation?
Thanks
Try flashing the 3.33 package again from here: http://goo.gl/qcbH9
Pls read in detail here: http://forum.xda-developers.com/showthread.php?t=1412618
and check your CID is supported.
If it doesn't work, try to find the RRU for your phone and flash it.
PD: to get to the bootloader, first take the battery out.
I hope it helps.
Brgds
ypsmav said:
Try flashing the 3.33 package again from here: http://goo.gl/qcbH9
Pls read in detail here: http://forum.xda-developers.com/showthread.php?t=1412618
and check your CID is supported.
If it doesn't work, try to find the RRU for your phone and flash it.
PD: to get to the bootloader, first take the battery out.
I hope it helps.
Brgds
Click to expand...
Click to collapse
Hello,
Thanks for your reply. I tried it, edited my CID in it and flashed, it worked and the .zip file was loaded but didn't solve the problem. actually nothing changed.
BR
There is another way you can use a custom rom without using USB. I have to do it this way because my USB port is damaged. First get a SD card reader. You can buy them for 5 dollars. Then take out your SD card place in the card reader, connect the card reader to the computer. Transfer the rom from the computer directly to the SD card. Then put card back in phone. Flash rom as usual. This works well. To get to boot loader remove battery put battery back in press volume down and power at same time. Hope this helps. At least you know another way of flashing rom without using USB. Maybe this will help because you can't use your USB. I wish you the best.
Sent from my HTC Sensation using xda premium
realsis said:
There is another way you can use a custom rom without using USB. I have to do it this way because my USB port is damaged. First get a SD card reader. You can buy them for 5 dollars. Then take out your SD card place in the card reader, connect the card reader to the computer. Transfer the rom from the computer directly to the SD card. Then put card back in phone. Flash rom as usual. This works well. To get to boot loader remove battery put battery back in press volume down and power at same time. Hope this helps. At least you know another way of flashing rom without using USB. Maybe this will help because you can't use your USB. I wish you the best.
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Thanks for your reply. I've thought about that, but my phone is Locked and S-ON (I didn't put any custom ROM on it before). I guess to put a custom ROM I need to unlock and S-Off it first? And to do that I must be able to connect it via USB.
Yes I believe so, but you can flash roms with s on. If you enable smart flash in recovery. However you must first be rooted. And yes that requires USB. How about my second suggestion. I looked into this. I ordered the USB part it's very cheap. Then called a cell repair company in my neighborhood. They said it will take three hours to do and cost 55.dollars. I haven't had the extra money but I'm going to fix it this way, when I get the money. This is a option for you! It's much cheaper then sending in for repairs! The part itself is like 7.dollars. so all together to fix locally it's going to be around 62.dollars. not too bad. Just look in your local phone book for cell phone repair shops. Get quote over phone but tell them you have the part it's much cheaper to order part yourself. I hope this helps. At least it will save you some money! Press thanks if I helped in any way. Best of luck. This is how I'm repairing mine.
Sent from my HTC Sensation