[ROM][Apache][WM6.5 WM6.5 28236.5.3.3] - XV6700, PPC-6700 ROM Development

WM6.5 28236.5.3.3 Simplified Chinese Version
6M PP
http://www.dbank.com/download.action?t=40&k=MzUzMTEyOTk=&pcode=LCwzNDMzNiwzNDMzNg==&rnd=4
http://disk.in189.com/viewfile.php?file_id=618&file_key=Pmtg7w1N
12M PP
http://www.dbank.com/download.action?t=40&k=MzUzMTMwMDk=&pcode=LCwzNDMzNiwzNDMzNg==&rnd=4
http://disk.in189.com/viewfile.php?file_id=619&file_key=TAUzSQ4d
Enjoy and use at your own risk.

do u have the WWE edition?

Thanks for posting these! 很多! I located the 三星 SIP for full screen and didn't know about 百度 until loading these up.
My experience with both 6MPP and 12MPP shows that they eat battery at an alarming rate. I couldn't find a cause. This is with the Phone and Wifi turned off but BT turned on (as I btdun through my flip phone).
The 三星全屏手写 SIP also seems to disable the touch screen input between power-off (sleep) mode at times, which when coupled with the power drain make these images a tad too unpredictable. I was able to reproduce the problem on my kitchen build after installing the SIP.
The 12MPP seems to have a large memory footprint, and I haven't figured out why or if that's the reason why there are two different images.
Did you make these yourself?

Related

PHM Traylaunch Sapping my Battery?!?!?!

I noticed that after I installed PHM traylaunch on my prophet my battery drains much faster. I have several programs and tweaks installed, but used to get through the entire day with at about 75% left...now it's down to 50% by the end of the day. Is it possible for the tiny little program to somehow be sapping the battery? That is the only other thing that I have installed since then that I can think would cause the change. Very strange!
Have not noticed that with my wizard - but can try it with and without - will let you know.
mine tray launch sucks up the power very fast also on my prophet..
any one knows why??
No real change on my wizard with traylaunch activated or not. I guess there is a software or hardware clash in the prophet so causing the battery drain. Might be worth hard reseting the prophet and adding one piece of software at a time to find the culprit. Peope have reported thet the Spb today plugins can be battery suckers!
btw U broke the forum rules and posted 3 times on the same issue and once in howard forum - slap wrists..
Don't forget that if you want to make sure, you should get a battery graphing utility to check the actual drain. There's two that work very well:
http://www.pocketgear.com/software_detail.asp?id=950 - Battery Monitor
http://www.pocketgear.com/software_detail.asp?id=10532 - Pocket Battery Analyzer
Both have demos that will basically run for a maximum of 30 minutes; more than enough to do a quick test to see whether an application running or not is causing significant additional drain.

Locked keys display still lights up on joystick some ROMs

First, I am newly signed up to XDA Developers and this is a great resource. You guys/gals really know your stuff, awesome learning from you.
On topic.
I picked up a Cingular 2125 and have been playing with it. I upgraded to the i-mate sp5 2.0.8.0 rom.
I noticed on the original 2125 1.0.9.0 (?) rom when the keys were locked and the screen / display timed out, moving the joystick didn't light up the screen. Now on the i-mate rom, the joystick does light up the screen, this causes excessive battery drain.
I played with the iPhone ROM (2.0.11.0) and it also doesn't light up the screen on joystick movement.
I did the WM6 beta romm (not the PEE version yet) and it does light up the screen.
I am coming from the 3125 (Star100) and am used to much longer battery life, I am thinking that the screen being lit up all the time is eating the batteries, has this been discussed and resolved already by you guys?
I am wondering which ROM I should settle on for the combination of best features. I am thinking about going to the PEE WM6 rom, but am wondering about this feature and will read the PEE WM6 thread in full before making up my mind.
Thanks in advance.
Brett
Edit - 20070914
- 1.0.9.0 - Original Cingular 2125 Rom - Joystick doesn't light up screen, no automatic time synchronization.
- Andot WM6 PEE version and it lights up the screen , has automatic time synchronization.
- Phil WM6 Beta version and it lights up the screen , no automatic time synchronization.
- imate SP5 2.0.8.0 and it lights up the screen , no automatic time synchronization.
- iPhone ROM (2.0.11.0) - Chinese - Joystick doesn't light up screen, has automatic time synchronization.
- HTC 2.0.13.0 2125 Rom - and it lights up the screen , no automatic time synchronization.
- Vista Rom SPV C600 2.0.14.0 - Chinese - Joystick lights up the screen - has automatic time synchronization.
Me too
I have the same problem. I am running Andot's latest on my 2125 and with the old (1.0.9.0) ROM I could run for days.
I notice it most when I use the holster that came with the phone. If I use the holster, the battery will be down to 30% by the end of the day. If I carry the phone in my pocket it will only be down to 80% at the end of the day.
I turned on the screensaver feature in Automatic Keylock to keep the backlight from turning on. It helps a bit, but the battery still runs down pretty fast since the LCD is still on without the backlight.
This is the only real problem that I have had, aside from some intermittent network problems.
hmm, so 1.09 and the iPhone rom both don't light up off of the Joystick and the iPhone ROM has automatic time synchronization, does the PEE edition have automatic time synch?
ttt with edit updates, in case anyone is interested.
So I'm having trouble with my work exchange server synch with that iPhone rom. Must be something in the registry.
Any other ROMs have those features?
fyi, I updated to the T-Mobile 1.0.14.0 ROM and it doesn't light up the display when the keys are locked when the joystick is moved.
I am running this one until I find something better. It works well for my needs. I'm hoping we can get a WM6 ROM with this feature.
Found a link to it via google.
http://www.howardforums.com/showthread.php?t=1035146&page=1&pp=15&highlight=htc+sda+rom
Fahtrim said:
- Andot WM6 PEE version and it lights up the screen , no automatic time synchronization.
Click to expand...
Click to collapse
It HAS automatic time synchronization. before updating to this ROM, everytime when I had to pull out the battery the time reset. Now, the time is automatically synched with operator's date&time.
Have you flashed Radio 4.1.13.28_02.61.01 ?
and about the light up on joystick press.. maybe there is some settings in registry? if you have time, you can dump the roms and compare the registry of them.. and see..
DSF said:
It HAS automatic time synchronization. before updating to this ROM, everytime when I had to pull out the battery the time reset. Now, the time is automatically synched with operator's date&time.
Have you flashed Radio 4.1.13.28_02.61.01 ?
and about the light up on joystick press.. maybe there is some settings in registry? if you have time, you can dump the roms and compare the registry of them.. and see..
Click to expand...
Click to collapse
I'm embarassed to say that I don't know how to dump the ROMs and compare the registries. I'd be willing to do it, if someone can shoot me a link on how this is done.
we are offtopic, aren't we?
for rom dumping you need typho5.exe & tadzio's ImgfsTools
read more here
.
read here how to convert registry HV to RGU .
compare the default.rgu & user.rgu from both ROM with Compare It or Microsoft WinDiff or other text comparing program.
Good luck!
I've looked into it, can't download http://rapidshare.com/files/20560641/MolskiBiz_DevPack.exe from work, but I do have the PEE rom dumped.
I also looked at the PEE rom again, and the automatic time feature is on the Date & time page (Start --> Settings --> Clock & Alarm --> Date and Time --> Automatic Time/Time zone is there), sorry for the misinformation. I will update the above now.
I was able to export PEE & The t-mobile registry with PHM and compare. They are significantly different, not sure where to start............
I'd suggest searching for keys and values containing: lock, key, stick, time, light, back ...
I've searched the reg of my WM6 Beta as well as on the internet (incl. MS sources) and found "some" keys/values but yet I couldn't find anything that seemed fitting.
Pop5k said:
I'd suggest searching for keys and values containing: lock, key, stick, time, light, back ...
I've searched the reg of my WM6 Beta as well as on the internet (incl. MS sources) and found "some" keys/values but yet I couldn't find anything that seemed fitting.
Click to expand...
Click to collapse
I've tried searching on various keywords and did the ones you tried above. I made changes to Display but it messed me up and I had to completely reflash. Different drivers in different ROMS??
As an update, since running the T-mobile rom, my battery life has been noticeably better.
Yesterday I wrote up a custom home screen using RJTime and Smartmonitor, purely for function, but even with the Smartmonitor running my battery life is still much better with the "no light up when keys locked when joystick pressed"
I have done some more searches and changes. No luck. A couple of the changes made so I had to reflash the device to get display back.
This rom: http://forum.xda-developers.com/showthread.php?t=331319
Does it better. Hitting the joystick while key-locked will turn on the screen but only for 7 seconds - no matter what timeouts the user set for non-locked operation.
However, the rom's far from "perfect english" with quite a few elements/texts being in chinese.
Pop5k said:
This rom: http://forum.xda-developers.com/showthread.php?t=331319
Does it better. Hitting the joystick while key-locked will turn on the screen but only for 7 seconds - no matter what timeouts the user set for non-locked operation.
However, the rom's far from "perfect english" with quite a few elements/texts being in chinese.
Click to expand...
Click to collapse
I disagree on that being better. If you are bumping the joystick constantly while in your pocket or in a holster, it is continually lighting up the screen. That is a battery killer.
I guess no luck on this issue. I have pretty much not found anything.
With "better" I meant better having the screen light up for just 7 seconds than 30, 60 or whatever else your normal un-locked display timeout is.
Obviously "best" would be if the screen did not turn on at all upon joystick presses.
I'm currently using the "WM6 HTC Edition" you can find in this forum. It's clean english and works with the 7 sec timeout as well.
My battery life drastically increased since I've started using the 7 sec versions. So I guess (unless you're wearing realy tight pants) the joystick aint constantly getting pressed. It just get's pressed every now in a while. So it's obviously better to have the screen unwanted on for "a few times 7 sec's" rather than "a few times 60 sec's" druing the day. But as I said that's true "unless you're wearing realy tight pants".

Battery drain (touch cruise or SPB mobile shell 2 )???

I made a small test.
1) Hard reseted the HTC, Charged my battery to 100%, then let the phone lying on my table for 12 hours without doing anything and then check battery status -> 84%
2) Hard reseted the HTC, installed SPB mobile shell 2.0 Charged my battery to 100%, then let the phone lying on my table for 12 hours without doing anything and then check battery status -> 68%
Anyone encountered this same issue?????
Thansk a lot for helping
Dag
Depends on whether you have set weather updates to download at set intervals. Also check your backlight options, this may have been changed by SPB.
I think I have heard a similar thing a couple of times (spb draining the battery). The solution as suggested by MrSmith22 is to disable the automatic weather updates. I think you also need to disable the option "Show the Now Screen when device wakes up".
Another thing which you may find useful is to install the PowerGuard program (freeware) and monitor the energy drawn by your device. I installed version 1.5 of the software you are using and with screen dimmed and nothing else running the buttery current is -32mA. Of course this varies between now and then...
I would say if you notice huge negative numbers while at standby, for example, -150, -300, then there might be a problem! These numbers are what i get when i use coreplayer for music or video.
Of course you need to make sure that WiFi is turned off. I have no idea how spb updates the weather reports. If it tries to use a WiFi connection every 10 minutes then i guess this could be a cause... In my device, I have also disabled the HSDPA mode as I do not really need it.
Bottom line, run PowerGuard and observe the current drawn with and without the software you are interested in.
Hope I helped...

Few Issues - Help!

Hey all.
Got my Touch Cruise recently and so far my experiences are mixed. Here's some of the problems I've had - maybe someone can suggest fixes?
1. Battery life is awful. With Wi-fi enabled I get at most 2 days out of a full charge.
2. Screen sensitivity is poor. Even with the stylus a lot of times I have to press the same key twice or the accuracy isn't 100% - very annoying when sending text messages.
3. When on a call the screen goes into standby meaning you can't easily turn on the speakerphone, mute/hold it etc. I've tried turning off all the power saving options I can find but it still happens.
4. Ring volume levels aren't great. Annoying when I'm out and about or in the car with the stereo turned up.
5. Backlight is very poor outside, or even in the car - basically anywhere where it's exposed to sunlight.
I've changed the UI to the SPB one as I was recommended to do on another forum, and it helps a bit, but to be honest I'm very close to selling it on unless I can get the above issues fixed.
Any ideas? Thanks!
You should check out the many posts on this forum, many of them address your concerns. I'll see if I can take a crack at them:
1) Yes battery life is not great, I wouldn't leave Wifi turned on all day. The less stuff you are using the better, for example if you're not using Bluetooth don't leave it on. Same for the WLAN. Don't have applications constantly making data connections either (prob not applicable if you're on the wifi). An example of such an application would be the weather app. Search the forums for tips on improving battery life.
2) There are registry key entries that improve the touch sensitivity of the screen and TouchFLO. Try this thread as a start. http://forum.xda-developers.com/showthread.php?t=355277
3) There's a registry entry for this, don't use Kaiser Tweak. http://forum.xda-developers.com/showthread.php?t=355230
4) Are you sure the ring volume is to the max? Is the ringtone itself loud? I'm pretty sure there's reg entries for this too, check out the tips and tweaks thread.
5) Yeah if sunlight is hitting it directly the screen is not very visible. Try turning the brightness up to the max. Supposedly there are screen protectors out there that minimize the effect of glare although I haven't personally tried any except for the stock protector.
Overall your best bet is to read the forums and use the search function. You will almost always find someone who has asked the same question in the past. And welcome to xda. HTH.

make my ROM energy friendly!!!

Hi all, i am usin my custom ROM on my Kayser, but battery life sucks, i can use the pocket pc almost 5 o 6 hrs with no phone calls, screen not on all time and using just EDGE (3G off)... i have screen back light too much dark as possible, so any one got tricks to get more battery life? i was thinking on this:
-Underclock (what tool its free and work perferct on kaiser Wm 6.1)
-Micro SD low energy or off when is not used (i dont remeber if this exist)
-GBS Tweak disconecting unnecesary EDGE after X time, and radio search set to dont search at start radio (done, but i lke to get the correct REG entry for cook it as default on ROM)
-Make a direct link for do a real shutdown of the Kaiser, i mean complety power off like when u press 5 sec power button
-Change the radio (wich one?)
-Any other ideas are welcome!!!
Regards!
FOR THE RECORDS (MAKE TOPIC MORE USEFUL):
- GBS Tweak for any WnMo 6.1
http://www.gb-soft.cz/xdaii/product_gprs-umts_tweak_wm61_diamond.htm
- Make a shorcut for link for complety Power Off the device
http://forum.xda-developers.com/showthread.php?t=424235
Underclock, never heard before, but most of us need speed and stable offcourse,
MicroSD, less energy consumption, nice idea, would wait and see it if it's gonna be,
GBS Tweak, ever used one in Hermes, it's great, i wish i had one for my Kaiser,
Direct link to shut down, Yes there is, use pShutoff app, we can choose to reboot, lock or shut down,
Radios, we need to try and comparing, and is there any radios comparison which describe which one had less energy consumption, had never seen before,
Other, maybe start doing just important thing to our device, rather than play it without any subject, use it properly.
GBS TWEAK Win MO 6.1 i got it from the oficial homepage, here http://www.gb-soft.cz/xdaii/product_gprs-umts_tweak_wm61_diamond.htm
i think sometime i read about low micro sd consumption but dont remember where (meaby in a tweak program), i got pShutof but dosnt Power off the Kaiser, just send it to stand by!!!
Regards!
UPDATE:
Found this one, here a link for complety Power Off http://forum.xda-developers.com/showthread.php?t=424235
Appreciate much for the links, will try it soon

Categories

Resources