First post here, hopefully somebody can shed some light. I've searched to no real avail for answers to these questions.
First, and most importantly, has anybody found a way to speed up the camera when taking 1280x1024 pics? The lag seems to be on the order of 1+ seconds, which is intolerable when you have a 2 year old. I found registry entries for the camera key delay, and set them all to like 100 or something (one of them was set to something huge like 100000 or something), but haven't seen any improvement to shutter speed. I may have even tried setting the delays to 0, but I don't remember anymore. NOthing seemed to help though...
Second, I see folks with the MDA have a 320x240 option for taking videos, however us SDA users only get 176x144 or smaller. I understand there are reg entries for video size, so I tried creating a mp4Large entry (which I did NOT have already, like the MDA users), but or course it didn't give me any new options in the video setup menu. So, anybody know if this is even possible? I have to assume it is. WOuld it be safe to import the mp4large entry from somebody's MDA, or would that even help? any insight here appreciated.
Third, has anybody found a way to make the phone automatically go into silent or meeting profiles when you plug it in? I hate it when some goofball calls the wrond number at 3 in the morning and my phone is blaring, and I can never seem to get into the habit of manually putting it on silent when I go to bed.
WHich reminds me, for those who haven't yet discovered this, you can toggle from normal to silent modes by holding down the # key. Most of you probably konw that already, but i jsut stumbled across it this weekend, so I thought I'd sahre with those who don't know.
I suppose I'll also ask folks what theiry typical battery life is too while I'm posting. Mine seems a bit short. With bluetooth on (but usually idle), WiFi off, and normal phone (1 hour max) and browsing (light browsing, wap pages mostly) usage my battery goes from 100% to <50% by the end of the day. THis seems a bit weak to me. Basically, there's no way I'd ever ea able to skip charging my phone overnight, for even one night. Not good when camping, etc. Is this pretty much on par with eveybody else's?
Greatly appreciate any comment, opinions, and help with any of these.
Thanks!
Jeff
Hello all. Fantastic forum and many thanks to all those contributing.
I received my O2 Xda Orbit 2 last week and I'm very pleased with the unit.
I only have two small issues with the device.
The first is more with WM6. As a left hander I would really appreciate being able to place the scroll bars in applications such as IE on the left hand side of the screen so that I don't obscure the screen almost every time I'm reading something. I don't suppose there's much hope of this happening though.
Secondly, I've read with interest the issue regarding the backlight on the keylock screen and I will try the registry tweak to get the backlight to come on at full brightness so that you can see the lock-code keys in daylight.
However, is there any way of making a short cut to adjust the backlight brightness from the 'today' screen? I'm finding that I adjust the backlight brightness for my office/indoors and then when I go outside and use the unit I can barely see the screen and it takes several attempts to get in to the unit and vary the backlight brightness.
It would be lovely if you could say press the central button and then turn the jog wheel clockwise/anti-clockwise to brighten/dim the backlight. Does any bright spark know if there's a means to do this or at least make backlight adjustments simpler?
Same goes for backlight on the Co-pilot software. As it's usually plugged into the car's fag-lighter socket the backlight's on full. Then when you drive at night it blinds you. It would be lovely to be able to press the central button and twirl the wheen to adjust screen brightness. All it actually does is to zoom in/out of the Co-pilot map.
Otherwise, a fantastic unit.
Hello,
First: If you find some software to handle the device easier for left handers please tell me. I'm always interested.
Second: If you install the GPRS Monitor Software (was delivered with my device) it places an slider for backlight on your Today Screen. So you can easily vary the intensity of your backlight.
Maybe not the best solution, but better than nothing.
Hope that helps...
P.S. Do you know a trick to disable the screen, so I can only hear the commandos? (Would be helpful when I go for a walk and get lost in the wood. In most cases I don't have some breadcrumb to mark my way home...)
Hi,
Yes, backlight control isn't all it could be on the orbit2/touch cruise (or any other windows mobile device).
For Copilot if you go into settings / map styles and select "automatic" under day night mode then it does behave better at night.
As for easy control over the backlight - after searching for a few days I noticed that the HTC Home screen that I'd already installed, had a backlight control app on the third tab. Each time you press on the app with your finger it changes the backlight intensity (in 4 stages)
Finally - The bluetooth light was really irritating me whilst the phone was in the car cradle at night. The following link discusses a means of disabling the light.
http://forum.xda-developers.com/showthread.php?t=365892&highlight=bluetooth+light
Backlight adjustment
Thank you for your replies.
I've been experimenting with the HTC home plugin.
I downloaded the version for WM6 that supposedly correctly the backlight adjustment this morning but have discovered that the backlight function does not work on my Orbit 2. Of course, I may be doing something stupid.
May I ask which version you're using and which works with the Orbit 2?
I've also installed the GPRS monitor software but I can't see anywhere where it displays a backlight slider on the today screen.
Many thanks again.
Lom
Backlight and gprs monitor
Sincere apologies,
I just discovered the backlight slider on the notification icon of the gprs monitor. Not the best solution but something.
Many thanks for the suggestion.
Hi, I wonder if there is a possibility to make the TC adjust backlight automatically? I know there's no light sensor, but can't the front-cam be used as one?
What do you think?
Or am I overseeing an already existing tool for this?
Many thx,
Eric
Same idea provided in "development and hacking" but no response!!
I think it would be a great thing
Unfortunately it doesn't seem to interest many people, both of my postings have so far been ignored... It's a pity, because I think it could be done by some pros inhere.
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Obviously, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
UPDATE :
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or a timeout set in the registry.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
I agree with your idea for such an application. I must admit that I am very used to just pushing the power button when I answer a call (from Polaris use) to ensure I am not going into other programmes as I rub the phone against my ear. On the other hand I am trying to get used to the Touch HD's modern automatic method but I can't help not feeling relaxed that it has worked and keep trying to look at the screen in the corner of my eye to see if it did go off or not.
If it does not come now I am sure there will be such an app very soon just as you describe especially as all the latest models now have it.
i'd use the half of it that doesn't require the G-sensor as i don't have a diamond or HD...
but i'm certainly sick and tired of my ear operating my touch screen while i'm speaking.
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Maybe the simpliest way to "protect" the screen is to switch it off. I suppose it must be some API to do that ?
Concerning the "locking", I think the simpliest way is to put on focus an empty window (transparent if it can be ).
I'm really happy to know that you're working on an app like that
lpaso said:
Hi,
I recently bought a HTC Touch HD, and I think that the "shutdown-screen-when-you-answer-a-call" function of phones like Diamonds, Touch Pro and HD is the dumbest way to prevent accidental presses on the touch screen.
Our devices have a light sensor, that could be used to switch off the screen if the phone is near the ear (like the phone using an "i" word ) and keep it on when you answer with loudspeaker for example.
The "problem" with this function is that when you're already in a "no-light" environment, the screen lock function doesn't work.
To resolve this issue, I think we could use the G-Sensor. Indeed, if the place has no light, then, the phone cannot detect the proximity of a ear. But when you put the phone next to the ear, you hold it a the vertical...
To make it short, the app should do :
Do nothing in normal use.
When a call arrives :
- it monitors the ambient light
If there's light :
- when you answer the call, if there's light then no more (you stick the phone next to the ear), it switches off the screen and continue to monitor.
- while in call, if there's light again (you want to see some info on the screen for example), it switches on the screen and continue to monitor.
- and so on until you end the call
If there's no light :
- when you answer the call, but let it at the horizontal (you let it on the desk for example), it does nothing
- if you take the phone on the vertical position (you stick the phone next to the ear), it switches the screen off.
- if the phone, during a call, goes from vertical to horizontal of horizontal to vertical, the screen is switches on/of
- and so on until you end the call
Indeed, you could replace the "switch on/off screen" with "lock/unlock screen".
What do you think about ?
I searched the forum for an existing app that could do this, but I didn't find anything.
If there's already an app that do this stuff, I'm truely sorry for this post.
Click to expand...
Click to collapse
I'm looking for this.. If you find a solution send me a PM, I will do the same
Thanks!
We need this app, how does the iphone acheive this?
I think the 'easiest' way to make this app would be to keep the phone doing what it does currently (put the phone on standby when answering a call) then have the light sensor take the phone out of standby when it receives light, (taking it away from your ear)?
Obviously if its dark then we would have to use the power butten as we currently do now or have the Gsensor do it with a twisting motion (vertical to horizontal).
If anyone has an idea how to program this i'm willing to help in any way, the current systems seems so crude on such tech devices!
DB
lpaso said:
Hi,
I searched the forum for an existing app that could do this, but I didn't find anything.
Click to expand...
Click to collapse
There a program, that can help you. Not full, but it can switch off screen, using g-sensor. However its using not vertical aligment of the phone. There are using changing orientation of the phone to decide when phone near the ear.
http://forum.xda-developers.com/showpost.php?p=2622590&postcount=45
I have always wondered why our WM phones don't do what the iphone does...
For the SE Xperia X1, the light sensor is right near the earpiece (along with the little front facing camera), so it would go to virtually 100% darkness when near the ear. I would presume unless you are using the phone also in 100% darkness (which should be pretty rare I would guess) then it would work like the iphone.
I have also been quite annoyed by the fact that after a phonecall, sometimes I found i'm in a note taking program or weather program or something else. It just seems dumb, considering our phone HAVE these lightsensors?!
I think it's a fantastic idea to solve a VERY FRUSTRATING PROBLEM
lpaso said:
no one has an opinion on this idea ? if there's nobody that want / have the time to develop a soft, I understand, but at least please, give me just your opinion
Click to expand...
Click to collapse
I would rank myself this way:
Not a newbie who's just gotten a touchscreen phone and is now discovering the quirks when holding screen to ear,
and not a developer,
but a power-user. I have installed all sorts of XDA-developed features/enhancements for my phone.
But now I have 4 years experience -- starting with the T-Mobile MDA, and its successor, the T-Mobile WING. And despite all of the advancements expected in that time, STILL, I inadvertently end a call, or put it on hold accidentally, ALL THE TIME. Between that and trying to retrieve the phone from my pocket just to answer the damn ringing phone, I would say I have, on the average, a 20% success rate -- and 80% of the time the call is disrupted. And at least once a day my ohone, in my pocket, even when using s2u2, manages to REDIAL my latest conversation, so mcuh so that all my friends say "why don;t you get rid of that phone. It does all these whiz bang things but still can't reliably manage a basic phone call.
My most recent experiment was to call someone, then when they answered, press the s2U2 key to lock the phone screen. Only I came to find out from A_C that this is no good: S2u2 does not have recognition that you're ending the call, thus, since it's in lock-mode, the "END CALL" or Hang-Up hard key does not work.
So by all means, I would even pay for an app that once and for all handles the baseline problems of simply making a phone call. Thanks for making this request.
fireweed, have you contacted A_C, author of s2u2 ?
There may just be perfect synergy between the two of you. His "best of breed" screen-lock app is widely used -- and other developers, like supbro, for example, author of iDialer, have collaborated on small code-bits from A_C to solve some integration problems.
If for any reason you are unfamiliar with A_C, go to his website: www.ac-s2.com -- where his apps are explained, and all link back to XDA.
He's even managed to make the screen lock work, yet, have it selectively overridden when you insert headphone jack -- such that his s2p (slide to play) app opens and allows you to switch music tracks etc while otherwise the screen and buttons are all fully locked...
fireweed said:
I've written a prototype to do exactly what you are talking about although the one crucial part I am missing is the lock code. Every example or suggestion for locking the screen is very hacky and never feels like a good approach. If anyone has a good solution for locking the screen (especially in managed code) I would be happy to complete what I have started and release it with source so it could be improved upon.
So far, the best locking utility I have seen is PocketShield although I'm not sure what approach was used for locking in that case. It almost feels like a form that captures all windows events but I'm not sure exactly.
Click to expand...
Click to collapse
Hi,
After playing a bit with the HD, it appears that HTC DOES use the light sensor for turning the screen off during a call.
Let's do a test :
In a place with plenty light :
- put your mobile with the face up
- call a number (always face up) : the screen will not be switched off until the light sensor detects a loss of luminosity or the timeout set in the registry expires.
So, my conclusion is that HTC already use the light sensor to switch the screen off during a call, but they do it in an absurd way :
- they poll the sensor just to shut down the screen, not to switch it on.
- once the screen has been switched off, they do not longer poll at all.
Do you think it could be a way to "hack" their system to do what we want to do ?
I think HTC does not only switch off the display but goes to standby (phone works independent if you didn't know yet). Your idea is a lot different in terms of programming.
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
lpaso said:
I don't know if it goes to standby : when the screen is switched off during a call, a press on any button switch it on again. In the registry, the key controlling the timeout before the screen is shut off is named "LightSensorToScreenOff" so I think it is just switching off the screen...
Click to expand...
Click to collapse
Well if thats the case, its HALF of what the iphone does... it turns off the screen based on the light sensor going dark suddenly (next to ear) but then fails to turn the screen back on after you move the phone away from your ear...
Anyone know how to enable this?
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Hmm... I never had my ear 'navigating' my phone during in-call before....
I never allowed the screen to touch my face anyway, and the speaker is facing the ear canal, when I receive or make calls...
But i do understand that s2u2 can do what you guys might need, it locks the screen during in call.
Hennyb said:
Interested in having this feature too. Isn't it possible to have the G-Sensor determine when the phone is vertical and shut the screen and then when it is lying flat to turn the screen back on again. Believe that the Iphone does it this way, not with the light sensor.
Click to expand...
Click to collapse
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Section9 said:
I think the Iphone has something called proximity sensor, which senses the distance from the ear to the phone, hence when the phone rest on the outer ear, the phone screen shut off.
Or am I wrong?
Click to expand...
Click to collapse
No, you're right. It uses an iR sensor to know if there's something near the phone.
Hi guys
I know this issue has been mention a bit, and I've searched through countless threads but I find the search system on the site a little counter intuitive, like forum searches will only bring up the thread, not the actual key word references and I have to search again within the threads to yield results, but I'd like to clarify a few things.
I'm running Cm11 nightlies on the phantom kernel and I have the screen wake issue. It takes multiple attempts to wake up the screen. OK.
I understand this is a problem with Kitkat roms for our device. However, my case is that there is a 50-50 chance that the screen doesn't wake up at all and I have to pull the battery. This makes any rom almost unusable for me as 1 out of 2 times I have to pull the battery to access the phone, Music continues to play, and I can skip tracks or play or pause, and even take photos, which means that the phone unlocks only the screen doesn't light up. If I hold down the power button, I can feel the phone vibrate to indicate the shutdown menu and sometimes I can blindly reboot or turn off the phone by tapping the screen roughly where the menus would be, so the touch is working.
Roms have been reinstalled and dalvik wiped etc but no improvement
I'd like to know if there's something I've done wrong to have so much poor luck. I don;t mind waiting for the screen to light up, or even a few tries, I'm aware of the unstable nature of nightly roms, and I am happy to use it and contribute usage stats to help further development, but not being able to get the phone on is a massive problem, especially when receiving a call
If anyone has any tips, I;d love them to let me know so I can add here as a one stop thread to general KK problems and work-arounds.
Pr m,aybe it's just my phone
Current mods
Xposed framework modules
greenify
kk bugs fixer (currently disable as seems to make no change)
minminguard
no lock home
Xposed gel settings.
No crazy overclocks or aggressive governers (tested with ondemand, intelliactive no difference, but great battery)
General rom experience apart from this - Excellent battery and very snappy, only a little skipping with audio (even with cache increased to 4010)
Cheers people!
try another kk rom
i did not use cm11 b,coz i had problems with the low reciever volume
tryout carbon rom or vanir aosp
they are too good
SOLVED
OK, thanks for the suggestions, actually I had the same issue on all roms that I tried.
The fix was the following, I disabled the NO LOCK HOME Xposed module and now all is back to normal.
i think there was an issue with it auto unlocking the screen on wifi or cel tower that caused the lockscreen to crash from time to time or get stuck. All is working like a dream now.
It~s a shame really, here in Brazilo with the rise of the Iphone and the high robbery rate, it´s quite common now for thieves to stick their gun in your face and demand your password or for you to unlock;disable the password during the robbery so that they can reset the apple acount or phone for resale. With nolock home I could save the cel towers near my home and work (for my walks to and from the subway) so that in case of a robbery, the phone just opens up and shows its unlocked, and then I can remotely wipe it later without giving up account details. Anyway, anybody else with this problem, thats the source of the Issue