Database Info

qtek s200 help!!!

i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?

http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?

i have a G3 idont it was 2.20 i think

plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...

my s200 already cid unlocked

alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4

so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????

just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help

how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help

Help Needed Stuck on IPL/SPL Screen

Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it

htcwizard123 said:
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
Click to expand...
Click to collapse
Search for Wizard Love ROM , download it and flash it. And hope ..

Read The Wiki
Sounds like you didn't unlock your phone before flashing, so. . .
READ THE WIKI!!!
THEN --
UNLOCK YOUR PHONE!!!
AND -- FOLLOW DIRECTIONS!!!

Of course THERE IS a Readme file
htcwizard123 said:
.............i got error "Error ocured during installation. Pls refer to readme file" but no readme file available .............
Click to expand...
Click to collapse
Right click the RUU that you run and extract the files in it, you´ll find a Word doc file that probably you should´ve read before....! Wizard Love or your original ROM will take you out of the tricolor screen, good luck!

I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance

There are already step by step guides - read them. If you can't find them, read them, and understand them, then don't flash your ROM. There's an entire board dedicated to the G4 version, but I guess you didn't see it.
http://forum.xda-developers.com/forumdisplay.php?f=343

Try this outline for SIM unlock
htcwizard123 said:
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
Click to expand...
Click to collapse
For SIM Unlock
http://forum.xda-developers.com/showthread.php?t=265928&page=47
For upgrading READ and UNDERSTAND the content of the first sticky of the G4 section. If you are going to save some money not paying to imeicheck you should consider spending enough time reading the diverse threads. Good luck!

DON'T CID UNLOCK YOUR PHONE USING LOKIWIZ . YOU WILL BRICK IT !!!
You have a G4 and it can be unlocked only by http://www.imei-check.co.uk/
You don't necessarily need to unlock it. It's easy. This are the stepps to follow :
1. Search for "Wizard Love ROM"
2. Download it and flash it using RUU.
3. Wait untill it's flashed and the customisation is finished !!!!
4. If you want to flash to a custom ROM, just download a rom of your choice
5. Extract the nk.nbf using WinRar or similar.
6. Download ShellTool
7. IMPORTANT !!! Read SHELL TOOL Readme and follow exactly to proper flash your phone
8. Enjoy !

But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie

htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
i forgot lol
Just plug it in the USB and start flashing the Wizard Love ROM by RUU

htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.

newbie2 said:
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
Click to expand...
Click to collapse
That's a G4
G3 is like : 2.XX
G4 is like : 2.XX.XX1

Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.

I guess the Wiki is wrong, then. . .
I've copied and pasted directly from the Wizard WiKi. If this information is wrong, someone needs to correct it.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.). _SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_ _SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
That information was taken directly from this thread. It's the same thread I refer people to in order for them to find out if they have a G3 or G4. If it's wrong, I'm sitting here with egg on my face. . .

Great !!!!! U saved my PDA .....Thanks a lot for the help. I will never make this silly mistake again.
Thanks again.

htcwizard123 said:
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
Click to expand...
Click to collapse
Do a hard reset. (hold the comm manager button and the voice speed dial and press the reset button. when asked, press send and it will format.)
Don't cancel the customisation.
@newbie2 now i am confused
@htcwizard123 What did you do ? Who was right ?

Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie

anichillus he has a G3 device... its obvious

htcwizard123 said:
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
Click to expand...
Click to collapse
No hard reset needed if it's all good. But troubles me ...how could you select the pop up menu before the cut/paste....tutorial appeared...??
Also...you must be lucky that you didn't brick your phone. So next time, think twice and flash only after you're sure that you know what you're doing.
Remember : Don't flash anything that contains IPL/SPL !!! (a G3 bootloader will brick your G4. And from now on flash using ShellTool or unlock your device via www.imei-check.co.uk - that will cost you some money)
DuKe_GR said:
anichillus he has a G3 device... its obvious
Click to expand...
Click to collapse
Why you say that ? I still think that 2.xx.xx1 is a G4
Also i don't think that you can flash a G3 with Wizard Love

Thanks again for all ur help.
But i am sure i have G4 device, i think it is not CID unlocked that's why i came across this issue. Do u think i have G3 device ?
Now i want to Flash it Windows Mobile 6, shall i follow instructions which is given in "G4 step by step install wm6.zip". Will it work fine ?
Pls help

kaiser info

Can anyone give me a spanish rom for flash kaiser?
thank's Andrea

ciassi83 said:
Can anyone give me a spanish rom for flash kaiser?
thank's Andrea
Click to expand...
Click to collapse
I have dumped it from the device, and have Part0-3.raw files, but don't know if it's possible to reconstruct and flash without the original OS.NB file.
Any help? Can i reconstruct using Spanish dumped ROM using WWE nb-imgfs files?
Thanks in advance.
Regards.

I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!

ciassi83 said:
I don't understand is my first attempt to use this phone..
please help me.. please i don't want loose it!!
Click to expand...
Click to collapse
Well, if you don't want to loose your TyTN II, you only need to power on, and start to using. Sure works for the most of you use it.
This forum is only to learn and have fun with the kaiser. So if your Kaiser works, don't touch...only read the user guide and that's all.
Read a lot is the only way to learn how to keep your device working
Regards.

please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..

ciassi83 said:
please you are from spain and have the same kaiser..please help me to do a ruu for flash my device and turn it on..please..
Click to expand...
Click to collapse
If you want to get some help, you need to give more details about your problem (if exsit...).
What have you done before the error happen? What is the error? What happen when you power on the device? What ROM version? What is the start secuence?
Without this info anyone can help you, believe me, peopple here are not magicians

-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..

ciassi83 said:
-I launched kaiser ssplv1 on my kaiser
-then i executed RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship
-At 16% of flashing, processes stop and i follow RUU.Kaiser.HTC.WWE.1.56.405.5.radio.sign.22.45.88.07.1.27.12.11.Ship instruction for continue the processes, but now at 1% process stop cause invalid vendor id.
-Now when I started I see the 3 color band (red,green,blue) and these words:
kais130
spl-1.56.0000
cpld-8
--in top right there is written RUUNBH
This is all..do you need anymore information?
please don't hurry with me..i'm afraid for this situation..
Click to expand...
Click to collapse
Seems you have a briked kaiser... take a look at http://forum.xda-developers.com/showthread.php?t=334693 to see if helps you getting info about your kaiser CID version...
I suppose you have an Spanish Kaiser, right?
So seems the only way to recover is flashing spanish Kaiser ROM (that we haven't).
The other way is sending to repair...

Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..

ciassi83 said:
Other info:
HTC TyTN II Kaiser (Kais130)
Rom: 1.56.412.4
Date Rom: 08/28/07
Radio: 1.27.12.11
Protocol: 22.45.88.07W
so I say you canhelp me..you have my same rom..
Click to expand...
Click to collapse
Yes, i have the same ROM, but the ROM is on my device, i have't the RRU file to upgrade your device...
I extracted the ROM, but for now don't know how to reconstruct it.
So you must wait or send to repair...

problem solved
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!

ciassi83 said:
I resolve it!!
Share this solution please it can help someone!!!
I was blocked to boot menu (no system bootstrap..)..so i launch mtty program and digit:
boot nbh ... et voilà my kaiser restart!!!!!!!!
After I reflashed rom with hardspl in correct way...
Thank's for all!!!!
Click to expand...
Click to collapse
Good news, mate.... congratulations....

Help About Elf

I was updating my HTC TOUCH, elf, I did besteira indeed, as played any rom it without knowing what tava doing, I saw a beautiful Roma, the prophet VIII and tried to pass but before he gave error, and not now locked exits the home screen, writing smart mobility, and is on top writing O.S 6.0.0.1 of red, to desesperando what ????, ja tried to help me install a lot of rom pra himself, but always when arrives at 3% of the mistake, I think I need to unlock it, but I am so as linking it in usb in activesync not go, then it does not pass the files of release, someone knows what I can do, thank you .

i think you screwed your elf by flashing prophet viii dude....

help
wanwarlock said:
i think you screwed your elf by flashing prophet viii dude....
Click to expand...
Click to collapse
Certainly, I did not know, now he ta locked, I wonder if someone knows what I can do now unlock, he ta arrested in bootloader, I have to restart entirely, leaving the rom blank .... I believe you know some way of to do this? Thanks.

Change CID / MID [S-ON]

Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000

Did you install the software version (android One)?
Did you install the software version (android One)? Usually the Telcel MID is the same as the unlocked and developer version, that's why only the CID is changed and you can install that

Mod edit - translated by https://www.deepl.com/translator:
Good night, my friend. The truth is that I just bought a HTC U11 Life and is very nice, but it has Android 7.1.1 operator of course Peru, and I would like to install a stock ROM or Android one (more I lean towards the second option) I would appreciate very much if you know how to guide the steps to follow, was attentive to your communication, my WhatsApp number is +51 980 511 815
**************************
Amigo buenas noches,. La verdad que recién compré un HTC U11 Life y es muy bonito, pero tiene Android 7.1.1 de operador claro Perú, y me gustaría instalarle una ROM stock o en su defecto Android one (más me inclino por la segunda opción) te agradecería enormemente me sepas orientar de los pasos a seguir, quedó atento a tu comunicación, mi número de WhatsApp es +51 980 511 815

DGabe said:
Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000
Click to expand...
Click to collapse
How do you flash it? by fastboot or recovery?

DGabe said:
Hi There, I recently bought this HTC U11 Life in Telcel (Mexican Carrier), and looking for a method to change CID and MID in order to flash the USA Unlocked RUU, I saw this post...
https://forum.xda-developers.com/htc-u11/development/to-modify-cid-mid-s-devices-t3771570
Thanks @handsome_hell
So I decided to do it...
Unlock Bootloader Check..
Flash Custom Recovery... Check...
When I tried to save the partition to the sd I encountered an error...
remote object '/dev/block/sde1' not a file or directory
figured out that it was a guide for U11 phones, so look forward to check partitons and change the "sde1" to mmcblk0p1 and search the Actual Carrier CID "HTC_332" so I changed it to Super CID... and flashed it, it's so easy!
CID:11111111
MID:2Q3F30000
Click to expand...
Click to collapse
I tried it and i got permision denied
dd: /dev/block/mmcblk0p1: Permission denied

Guy's there is a much easier way to do it. Simply flash that zip. Ready to work on mid="2Q3F20000" with S-ON. Cheers

If i remember correctly
neygus_59 said:
dd: /dev/block/mmcblk0p1: Permission denied
Click to expand...
Click to collapse
Mmcblk0p1 is strictly for usb_otg devices, so i assume there is something wrong with that method

Mmcblk1p1 - external_sd
Mmcblk0p1 - otg
Mmcblk0p47 - carrier partition
Mmcblk0p(**) - rest of partitions
** = any other nr of partition