Database Info

My JAMIN not Working??

Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me

Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?

mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you

You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.

Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)

wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device

First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks

Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all

how can i downgrade k-jam g4

Hi all..
I have i-mate K-JAM. I need to downgade my phone rom..
thats my specification.
( i'm sure its G4 )
ROM. 2.16.9.1 WWE
RADIO VER. 02.07.10
EXTROM VER: 2.16.101
extremely i need help.
i have "K-JAM_WWE_1010903_106_10110_ship.exe " i don't know how can i upload that rom to my phone..

You can't downgrade to an 1.x rom on a G4. You will brick you're device. Just wondering.... why do you want to downgrade?

indeed the rom you have is already pretty old and crappy why do you want an older crappier rom on there?

because i could not use my phone in this country. Its blocked. if i can downgrade my rom, can i change what i need ?
Thats the why i want to do downgrade..
If i'm wrong pls what can i do..

YAHOOO said:
because i could not use my phone in this country. Its blocked. if i can downgrade my rom, can i change what i need ?
Thats the why i want to do downgrade..
If i'm wrong pls what can i do..
Click to expand...
Click to collapse
blocked how?
is your IMEI blocked? if so changing the rom won't do crap.

Downgrading for Upgrading
Dear friends. I recently installed a game named Assassin's Creed on my K Jam. When ever I play this game or other games I get white screen of death after 15 minutes. I want to upgrade my Rom to WM 6.1 for this reason. I have currently WM 5. Now the problem is that my phone is G4. It can't be cid unlocked. I have even used Hard SPL. Soft SPL. Every program from lockiwiz to some cab files. I can't unlock the damn cid. Now what can I do. I have read that there is a rom called CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. Is this an old rom which I could downgrade to? Can it be downgraded in G4. Please Help! I am in great trouble. The errors I get when upgrading are sometimes This Rom can't be upgraded please hard reset and try again. Error 629 or something. And anohter rom gives a message you mk.mbf file is older so this rom can't be upgraded. Error 600 I think. Thanx in Advance.

sipraomer said:
Dear friends. I recently installed a game named Assassin's Creed on my K Jam. When ever I play this game or other games I get white screen of death after 15 minutes. I want to upgrade my Rom to WM 6.1 for this reason. I have currently WM 5. Now the problem is that my phone is G4. It can't be cid unlocked. I have even used Hard SPL. Soft SPL. Every program from lockiwiz to some cab files. I can't unlock the damn cid. Now what can I do. I have read that there is a rom called CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. Is this an old rom which I could downgrade to? Can it be downgraded in G4. Please Help! I am in great trouble. The errors I get when upgrading are sometimes This Rom can't be upgraded please hard reset and try again. Error 629 or something. And anohter rom gives a message you mk.mbf file is older so this rom can't be upgraded. Error 600 I think. Thanx in Advance.
Click to expand...
Click to collapse
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You

ksrikanth said:
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You
Click to expand...
Click to collapse
Thanx for the quick reply buddy. But before reading your response I have installed Hard SPL for the second time now. How can I un installl it. Thanx you are great. I love you. MUAAAHH.
Ok Don't bother. i uninstalled it. I am downloading a rom. Then I will download your rom. Cause the previous rom download was started last night. My internet service got expired so I resumed the download today. By the grace of God I will do it.

Astalavista babe
ksrikanth said:
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You
Click to expand...
Click to collapse
Yipeppepepep. I am successful. I am successful. I am successful. Dancing. I am greatfull. You are an angel just like in the movie perfume. Although I will not eat you. Hhahaha. THanx buddy. Your short but precise tutorial was far better than those confusing posts. They have contributed though but it would have been better if they would have catogorized between G4 and G3. Thanx again. And marry christmas to all christians. By the way tomorrow is Muslims' eid. Eid Greetings to all the muslims.

sipraomer said:
Yipeppepepep. I am successful. I am successful. I am successful. Dancing. I am greatfull. You are an angel just like in the movie perfume. Although I will not eat you. Hhahaha. THanx buddy. Your short but precise tutorial was far better than those confusing posts. They have contributed though but it would have been better if they would have catogorized between G4 and G3. Thanx again. And marry christmas to all christians. By the way tomorrow is Muslims' eid. Eid Greetings to all the muslims.
Click to expand...
Click to collapse
Both the programs 'SoftSPL' and 'HardSPL' are invented by the same very valuable member ' the-equinoxe ' and are posted as Stickies in the G4 forum with clear instructions/heading that its meant for G4 devices.Its strange you cudn't differentiate it as G3 or G4,only if you wud have read it and understood it,instructions are very much crystal clear.Thousands and thousands have benefited from these programs and applications,there's nothing confusing about it.Strange!!!
ksrikanth has simply narrated the same instructions and nothing new,though!
You shud give this credit to the original inventor of these programs,otherwise,there was no other known program to upgrade a G4 device to wm6.He is the 'Angel' in fact.A great service to the wizard community at large,we all will always be thankful to him
And,Thanks for the EID greetings

zabardast_1 said:
Both the programs 'SoftSPL' and 'HardSPL' are invented by the same very valuable member ' the-equinoxe ' and are posted as Stickies in the G4 forum with clear instructions/heading that its meant for G4 devices.Its strange you cudn't differentiate it as G3 or G4,only if you wud have read it and understood it,instructions are very much crystal clear.Thousands and thousands have benefited from these programs and applications,there's nothing confusing about it.Strange!!!
ksrikanth has simply narrated the same instructions and nothing new,though!
You shud give this credit to the original inventor of these programs,otherwise,there was no other known program to upgrade a G4 device to wm6.He is the 'Angel' in fact.A great service to the wizard community at large,we all will always be thankful to him
And,Thanks for the EID greetings
Click to expand...
Click to collapse
Dear I was making a mistake. First it didn't tell to copy the nk.nbf file to the soft spl folder in that post as far as I can remember. Secondly I was installing the rom after taking out battery when white screen comes and then trying to install it through bootloader. That was confusing. And the instructions got jumbled up at that time. I mentioned G3 catogrization according to other posts in which bootloader way is instructed but it is only for G3 and not G4. Where as in G4 we have to install rom while the white screen is there and that should also be through the nk.nbf file which we copy from the rom folder to soft spl folder. THis thing was not clearly written in the rest of the posts. This is what I was talking about. As it is my first flashing. So I faced these problems. Anyways this way or that way I got my objective and that is the thing which means to me most. All the people of previous posts as well as this user have contributed so all get credit. Cheers. And best regard.

Placing nk.nbf in the SpftSPL folder is only required while flashing through SoftSPL method,this is a temporary method,you'll always have to use or flash through SoftSPL,but if you apply HardSPL,the phone is Semi-Permanent CID unlocked and remains like this untill you personally don't remove HardSPL.With HardSPL,you just flash and upgrade in Bootloaders like an official stock rom or as in G3,thats the difference in SoftSPL and HardSPL.Yes! a G4 device can be Flashed/upgraded through Bootloaders.BTW,sSPL is a bootloader too
I'll suggest,you reread the SoftSPL sticky again.Regarding instructions in the SoftSPL sticky, I quote:-
"USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip"

zabardast_1 said:
Placing nk.nbf in the SpftSPL folder is only required while flashing through SoftSPL method,this is a temporary method,you'll always have to use or flash through SoftSPL,but if you apply HardSPL,the phone is Semi-Permanent CID unlocked and remains like this untill you personally don't remove HardSPL.With HardSPL,you just flash and upgrade in Bootloaders like an official stock rom or as in G3,thats the difference in SoftSPL and HardSPL.Yes! a G4 device can be Flashed/upgraded through Bootloaders.BTW,sSPL is a bootloader too
I'll suggest,you reread the SoftSPL sticky again.Regarding instructions in the SoftSPL sticky, I quote:-
"USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip"
Click to expand...
Click to collapse
Buddy. I was talking of that stupid multi colored boot loader. Although I have no problem with the developer or his product. But I want to ask one question. IF things get done with soft SPL then whats the need of Hard SPL. I mean to hell with permanent semi cid unlocking. just relax fool the G4 for sometime get the job done and thats it. Anyways. You win and I loose. Man. They were clear and I was blind. Hhahhahhahah

Ok now here is a problem which I have been facing since I bought my K Jam. Dear. Tell me that can I assign the asterisk button * key to any soft key. Because some games like Assassin's Creed are not recognizing the asterisk key so if by some registry hack will it be possible to re assign that key so that the game may recognize it. OR is there any emulator for games which can assign the control keys?

hey ! i need to return my wizard in about 1 month to the store and get a new phone. the thing is , they want it the same software it was before i upgrade. it's no possible to downgrade to wm5 ?

mohen said:
hey ! i need to return my wizard in about 1 month to the store and get a new phone. the thing is , they want it the same software it was before i upgrade. it's no possible to downgrade to wm5 ?
Click to expand...
Click to collapse
Which is your device,G3 or G4 ? and which rom is working on it at present.YES! its always possible to revert back to official rom and Bootloaders (IPL/SPL),only the method differs for both the devices.

zabardast_1 said:
Which is your device,G3 or G4 ? and which rom is working on it at present.YES! its always possible to revert back to official rom and Bootloaders (IPL/SPL),only the method differs for both the devices.
Click to expand...
Click to collapse
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..

mohen said:
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..
Click to expand...
Click to collapse
Hi,
Your device is already flashed to hardspl so do not flash any official ROM's Or you will surely brick your device. Which is the maker of your wizard?
Short details of hardspl :
ipl 2.21.0001
spl 2.21.olip ( Is known as hardspl )
Follow these steps to remove hardspl:
1. Download Qtek 9100 G4 Main IPl&SPL.zip which is attached below. ( Do no worry, this zip is for all th G4 Device which have 2.21.0001 SPL/IPL )
2. Download softspl from here : Link
3. Extract softspl and the provided zip file.
4. Go to extracted folder of the Qtek 9100 G4 Main IPl&SP and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your wizard and make sure your activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till the dos windows apps ends to 100%.
7. Dos windows closes and ruu will be opens.
8. Take a look on you wizard screen, that the screen should be fully white and no active led on top of the device ( I mean network led, power led, wifi led or bluetooth led).
9. If step 8 is OK then you continue to flash the spl/ipl. Follow the RUU instruction to flash the ROM.
10. It completes in 1 - 2 min. Till then do not disconnect or open any softwares. Keep it mind that, your flashing spl/ipl and if something goes wrong, you will surely brick your device )
11. Now you removed hardspl.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
Steps for flashing official ROM:
1. Download the official ROM ( Note the official ROM should be the same maker of your device. I mean, If you have a qtek 9100 then you should download qtek official ROM.
2. Extract the official ROM which you have downloaded.
3. Run the ROMUpdateUtility.exe.
4. Now you can continue to flash the ROM.
5. Thats all, Now you have the official wm5 ROM.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait some time it will surely omplete the flashing.
Warning :
* Before flashing, make sure you have ups for the pc.
* Use windows xp.
* Before flashing, make sure you have not running any background software.
If you have any trouble, Plz PM or post here......
Good Luck
Thanking You

mohen said:
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..
Click to expand...
Click to collapse
Ok,no problem,as your phone is HardSPL,first remove HardSPL,reflash back to official original Bootloaders(IPL/SPL) and then afterwards reflash the official stock rom with which your phone came,its all very easy,just read and follow this link :-
http://forum.xda-developers.com/showthread.php?t=342744
And,just don't worry about the old Radio Rom or old IPL/SPL,as its permissible to upgrade by the carrier,just tell them,if they ask,that you upgraded to latest IPL/SPL and Radio Rom,they won't bother.
Its only the Custom Rom and CID unlock they object to,as long as official stock rom is working and G4 devices don't get CID unlocked,it'll show as CID locked,therefore,they have no objection.

[UPG][V.1] ELFIN USPL - CID Unlock & flash *ANY* rom to your device [ONLINE]

Hello everybody!
I made up a new version of pof's USPL, which is explicitly for the ELFIN 128/256 MB devices. So now you can flash SPL in step three without bricking your ELFIN, as USPL for ELF used to do.
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Download here:
http://rapidshare.com/files/94753943/ELFIN_USPL.rar
It has been tested by various users including myself and was verified to work without any problems.
Even though, I take no responsibility for any damages on your devices.
Thanks to pof for his great work!
If it doesn't work for you right away, follow the instructions in this file to enable RAPI prior to using USPL:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
EDIT:
SOME PEOPLE GIVE THE INSTRUCTION ON MY ELFIN USPL TO CANCEL STEP THREE. WHAT THE HELL ARE YOU THINKING WHAT THIS STEP IS? WITHOUT THIS STEP, THERE IS NO (!!!!!) SENSE IN ELFIN USPL.
So please stop giving tutorials on things you don't understand.
STEP 3 IS THE MOST IMPORTANT STEP! RUN IT, DON'T CANCEL.

good news for elfin users! well i will use this version when i got a chance lol thanks for your great job tho~
btw got you a mirror link: http://www.fs2you.com/files/0bbd31fa-e3ad-11dc-91b6-0014221b798a
cheers!

Great!Thank u very much!

is this working for
IPL 2.24.0002
SPL 2.24.0000????

eastwoodz said:
is this working for
IPL 2.24.0002
SPL 2.24.0000????
Click to expand...
Click to collapse
i have the same question.

I received a "corrupt image error" at step 3, i rebooted the device and is working fine like nothing has happened, any clues?
I have this ROM installed:
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
IPL 2.20.0002 and SPL 2.20.0000 both remain unchanged after running elfin-uspl.exe

what is difference from pof's USPL?
as i used it to update my ELFIN without any problem

With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099

Nice, very nice tool ... no more brick then
Thanks for the work

Can someone please clarify this for me.
I bought my cellphone from Vietnam, and it is unlocked. It is windows 6 prof, and I am very serious about flashing my baby to 6.1. When I was in Vietnam, I was using VietTel, t-Mobile, and in Mexico using Telcel.
BUT I bricked my iMate Sp3i before, and didn't want(CAN'T afford) to brick another one.
The question would be.
Because it is unlocked. Do I need to CID Unlock my Elfin P3452 before upgrading to 6.1? Thanks in advance.

djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
somemore questions..
after runnig 2 steps successfully in pof's app, if rom update fails then i think it does not brick all the time.. atleast not 99% !!
is SPL temporary updated means after some update again CID is locked?
or it is permanent?

Excelent work djvw !! many thanks, I can confirm that works fine, three users in our spanish forum flashed this USPL and it works in all cases... no more white screen to flash roms.....

my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful

ababrekar said:
my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful
Click to expand...
Click to collapse
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.

djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
ok, i will try this.

ciberus said:
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.
Click to expand...
Click to collapse
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?

ababrekar said:
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?
Click to expand...
Click to collapse
ok.. so it is done on my elfin... so i think.. didnt show me any errors... the ruu worked like a chram too and at last it showed me "Congratulations" but my question is how do i confirm if the cid is really unlocked... i dont wanna flash a good rom and get my touch bricked
Edit: it worked finally and i think my elfin should now be unlocked

Please, tell me the instructions.
I don´t Understand

Thank You
I have flash my ROM today with success !!!
From 2.26.111.53GER to 2.81.111.1GER without Extended ROM (T-Mobile Applications)
SIM Unlock worked too..
After a hard reset I have 137/81MB free memory...
T-Mobile Elfin - MDA Touch XL 128/256 MB
Thank you pof and djvw!!!

djvw said:
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Click to expand...
Click to collapse
Does this one work on ELF ? Anyone tried already?
I have an ELF touch with 2.20.0000 SPL, should I use this ELFIN version or use the 1.11 ?

Can i flash rom in bootloader?

i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.

ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?

i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.

ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?

IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.

ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.

mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!

Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.

Identify Prophet

Hi All,
I am new to prophet. I wanted to flash one of the new 6.5 Rom on my phone. Its an Imate Jamin phone. But I am confused as to whether is my phone a G3 Phone or G4 phone. How do you differenciate / understand what phone you have?
Also what is the difference between G3 and G4?
Thanks
Regards,
Kailash

all in one
you can read here so that your questions can be answered..
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
goodluck

Thanks a lot for the information link that you provided me. This has helped me a lot.
I am also facing another issue. When I try to run the Hard SPL on my PC to install it on the phone --> it will go all the way till the time the phone screen turns into 3 colors and the moment it does that there is an error in the RUU stating this MFC application has performed an illegal operations. Windows will now close this operation and I get a msg box saying send information or don't
Please help.
Kailash

1. what Operating system are you using? XP or Vista?
2. While in bootloader mode <3 color screen> does it show USB on the lower left corner of your phone screen? and does it show RUU on upper right corner of the same screen?
3. If there are errors still and theres a code given like Error code 345 < example only > define it here.. file attached
4.Btw, did you hardSpl'ed your device without knowing if its G3 or G4???? (
5. if youre using Vista as OS on your PC and got about with g3 and g4 prob read this...
http://forum.xda-developers.com/showthread.php?t=485293
PS. i will be off to Thailand tomorrow but i will have a lappy with me.. hope i can still connect to this forum.. will try my best...

Hi Marek
Thanks a lot for the link that you provided. I have windows 7 as by OS and that could be the reason for the error.
Will try it and let you know. Thanks anyways for the help.
Another think. I used my other Windows XP machine for updating the rom but after installation of the rom - computer screens shows finish but on handset restart it still has window 5. What could be the reason for this. Can you help.
Thanks
Regards
Kailash

hello
have you tried hardspl?? provide me the ipl and spl youre getting the moment you boot up your device...
heres how you can get your IPL/SPL
soft reset your device... and while its booting up look at the upper right corner of your screen there you will see your ipl and spl ... iuf you have SPL like
2.g3.4pda < for g3 models > 2.g4.4pda <for g4 models ... hope im right for g4 coz i have g3>. if you dont have this spl you need to hardspl your device first before trying to flash a new rom for example WM6.1 or more...
heres a link if you dont have hardspl on your device
http://forum.xda-developers.com/showthread.php?t=350033
follow closely and MAKE SURE YOU HAVE THE RIGHT MODEL ON YOUR DEVICE... ex. make sure if your G3 or G4 btw read the link its provides the proper way...
from thailand
marek