Related
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
Hi all..
I have i-mate K-JAM. I need to downgade my phone rom..
thats my specification.
( i'm sure its G4 )
ROM. 2.16.9.1 WWE
RADIO VER. 02.07.10
EXTROM VER: 2.16.101
extremely i need help.
i have "K-JAM_WWE_1010903_106_10110_ship.exe " i don't know how can i upload that rom to my phone..
You can't downgrade to an 1.x rom on a G4. You will brick you're device. Just wondering.... why do you want to downgrade?
indeed the rom you have is already pretty old and crappy why do you want an older crappier rom on there?
because i could not use my phone in this country. Its blocked. if i can downgrade my rom, can i change what i need ?
Thats the why i want to do downgrade..
If i'm wrong pls what can i do..
YAHOOO said:
because i could not use my phone in this country. Its blocked. if i can downgrade my rom, can i change what i need ?
Thats the why i want to do downgrade..
If i'm wrong pls what can i do..
Click to expand...
Click to collapse
blocked how?
is your IMEI blocked? if so changing the rom won't do crap.
Downgrading for Upgrading
Dear friends. I recently installed a game named Assassin's Creed on my K Jam. When ever I play this game or other games I get white screen of death after 15 minutes. I want to upgrade my Rom to WM 6.1 for this reason. I have currently WM 5. Now the problem is that my phone is G4. It can't be cid unlocked. I have even used Hard SPL. Soft SPL. Every program from lockiwiz to some cab files. I can't unlock the damn cid. Now what can I do. I have read that there is a rom called CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. Is this an old rom which I could downgrade to? Can it be downgraded in G4. Please Help! I am in great trouble. The errors I get when upgrading are sometimes This Rom can't be upgraded please hard reset and try again. Error 629 or something. And anohter rom gives a message you mk.mbf file is older so this rom can't be upgraded. Error 600 I think. Thanx in Advance.
sipraomer said:
Dear friends. I recently installed a game named Assassin's Creed on my K Jam. When ever I play this game or other games I get white screen of death after 15 minutes. I want to upgrade my Rom to WM 6.1 for this reason. I have currently WM 5. Now the problem is that my phone is G4. It can't be cid unlocked. I have even used Hard SPL. Soft SPL. Every program from lockiwiz to some cab files. I can't unlock the damn cid. Now what can I do. I have read that there is a rom called CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. Is this an old rom which I could downgrade to? Can it be downgraded in G4. Please Help! I am in great trouble. The errors I get when upgrading are sometimes This Rom can't be upgraded please hard reset and try again. Error 629 or something. And anohter rom gives a message you mk.mbf file is older so this rom can't be upgraded. Error 600 I think. Thanx in Advance.
Click to expand...
Click to collapse
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You
ksrikanth said:
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You
Click to expand...
Click to collapse
Thanx for the quick reply buddy. But before reading your response I have installed Hard SPL for the second time now. How can I un installl it. Thanx you are great. I love you. MUAAAHH.
Ok Don't bother. i uninstalled it. I am downloading a rom. Then I will download your rom. Cause the previous rom download was started last night. My internet service got expired so I resumed the download today. By the grace of God I will do it.
Astalavista babe
ksrikanth said:
Hi,
Wait for 10 hours and I will be uploading my new and latest ROM.
Do not think about downgrading the G4 device. You will brick you're device
Do these steps to flash the ROM :
This guide is only for G4 device and flash in windows xp. Plz make sure that your device is G4 and has not flashed to hardspl. Check this link
1. Download softspl from here : Link
2. Download any ROM for HTC Wizard : My ROM
3. Extract softspl and The ROM.
4. Go to extracted folder of the ROM and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your HTC Wizard and make sure activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till it ends to 100%.
7. Dos windows closes and ruu will be opened.
8. Take a look on you wizard screen that the screen should be fully white and no active led on top of the device.
9. If step 8 is correct then you continue to flash the ROM. Follow the RUU instruction to flash the ROM.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait for some time it will surely complete the flashing.
For more detail about flashing ROM's, check this : link
If you have any trouble plz post.
Thanking You
Click to expand...
Click to collapse
Yipeppepepep. I am successful. I am successful. I am successful. Dancing. I am greatfull. You are an angel just like in the movie perfume. Although I will not eat you. Hhahaha. THanx buddy. Your short but precise tutorial was far better than those confusing posts. They have contributed though but it would have been better if they would have catogorized between G4 and G3. Thanx again. And marry christmas to all christians. By the way tomorrow is Muslims' eid. Eid Greetings to all the muslims.
sipraomer said:
Yipeppepepep. I am successful. I am successful. I am successful. Dancing. I am greatfull. You are an angel just like in the movie perfume. Although I will not eat you. Hhahaha. THanx buddy. Your short but precise tutorial was far better than those confusing posts. They have contributed though but it would have been better if they would have catogorized between G4 and G3. Thanx again. And marry christmas to all christians. By the way tomorrow is Muslims' eid. Eid Greetings to all the muslims.
Click to expand...
Click to collapse
Both the programs 'SoftSPL' and 'HardSPL' are invented by the same very valuable member ' the-equinoxe ' and are posted as Stickies in the G4 forum with clear instructions/heading that its meant for G4 devices.Its strange you cudn't differentiate it as G3 or G4,only if you wud have read it and understood it,instructions are very much crystal clear.Thousands and thousands have benefited from these programs and applications,there's nothing confusing about it.Strange!!!
ksrikanth has simply narrated the same instructions and nothing new,though!
You shud give this credit to the original inventor of these programs,otherwise,there was no other known program to upgrade a G4 device to wm6.He is the 'Angel' in fact.A great service to the wizard community at large,we all will always be thankful to him
And,Thanks for the EID greetings
zabardast_1 said:
Both the programs 'SoftSPL' and 'HardSPL' are invented by the same very valuable member ' the-equinoxe ' and are posted as Stickies in the G4 forum with clear instructions/heading that its meant for G4 devices.Its strange you cudn't differentiate it as G3 or G4,only if you wud have read it and understood it,instructions are very much crystal clear.Thousands and thousands have benefited from these programs and applications,there's nothing confusing about it.Strange!!!
ksrikanth has simply narrated the same instructions and nothing new,though!
You shud give this credit to the original inventor of these programs,otherwise,there was no other known program to upgrade a G4 device to wm6.He is the 'Angel' in fact.A great service to the wizard community at large,we all will always be thankful to him
And,Thanks for the EID greetings
Click to expand...
Click to collapse
Dear I was making a mistake. First it didn't tell to copy the nk.nbf file to the soft spl folder in that post as far as I can remember. Secondly I was installing the rom after taking out battery when white screen comes and then trying to install it through bootloader. That was confusing. And the instructions got jumbled up at that time. I mentioned G3 catogrization according to other posts in which bootloader way is instructed but it is only for G3 and not G4. Where as in G4 we have to install rom while the white screen is there and that should also be through the nk.nbf file which we copy from the rom folder to soft spl folder. THis thing was not clearly written in the rest of the posts. This is what I was talking about. As it is my first flashing. So I faced these problems. Anyways this way or that way I got my objective and that is the thing which means to me most. All the people of previous posts as well as this user have contributed so all get credit. Cheers. And best regard.
Placing nk.nbf in the SpftSPL folder is only required while flashing through SoftSPL method,this is a temporary method,you'll always have to use or flash through SoftSPL,but if you apply HardSPL,the phone is Semi-Permanent CID unlocked and remains like this untill you personally don't remove HardSPL.With HardSPL,you just flash and upgrade in Bootloaders like an official stock rom or as in G3,thats the difference in SoftSPL and HardSPL.Yes! a G4 device can be Flashed/upgraded through Bootloaders.BTW,sSPL is a bootloader too
I'll suggest,you reread the SoftSPL sticky again.Regarding instructions in the SoftSPL sticky, I quote:-
"USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip"
zabardast_1 said:
Placing nk.nbf in the SpftSPL folder is only required while flashing through SoftSPL method,this is a temporary method,you'll always have to use or flash through SoftSPL,but if you apply HardSPL,the phone is Semi-Permanent CID unlocked and remains like this untill you personally don't remove HardSPL.With HardSPL,you just flash and upgrade in Bootloaders like an official stock rom or as in G3,thats the difference in SoftSPL and HardSPL.Yes! a G4 device can be Flashed/upgraded through Bootloaders.BTW,sSPL is a bootloader too
I'll suggest,you reread the SoftSPL sticky again.Regarding instructions in the SoftSPL sticky, I quote:-
"USE AT OWN RISK
How To use?
If you don't know what a G4 safe ROM is, don't even try to upgrade!
WILL NOT WORK IN VISTA
-Unzip SoftSPL.zip
-copy the nk.nbf file from desired G4 safe ROM to the SoftSPL folder
-Fully Connect to ActiveSync
-Run START-sSPL.exe
-the Screen of your Device will turn white, don't panic, this is normal
-SoftSPL will now run the RUU, proceed as usual (the screen of the wizard will stay white during whole process, again don't panic!)
DO NOT PROCEED WITH RUU if the screen isn't WHITE, OR when in bootloader SPL version isn't 2.21.olip"
Click to expand...
Click to collapse
Buddy. I was talking of that stupid multi colored boot loader. Although I have no problem with the developer or his product. But I want to ask one question. IF things get done with soft SPL then whats the need of Hard SPL. I mean to hell with permanent semi cid unlocking. just relax fool the G4 for sometime get the job done and thats it. Anyways. You win and I loose. Man. They were clear and I was blind. Hhahhahhahah
Ok now here is a problem which I have been facing since I bought my K Jam. Dear. Tell me that can I assign the asterisk button * key to any soft key. Because some games like Assassin's Creed are not recognizing the asterisk key so if by some registry hack will it be possible to re assign that key so that the game may recognize it. OR is there any emulator for games which can assign the control keys?
hey ! i need to return my wizard in about 1 month to the store and get a new phone. the thing is , they want it the same software it was before i upgrade. it's no possible to downgrade to wm5 ?
mohen said:
hey ! i need to return my wizard in about 1 month to the store and get a new phone. the thing is , they want it the same software it was before i upgrade. it's no possible to downgrade to wm5 ?
Click to expand...
Click to collapse
Which is your device,G3 or G4 ? and which rom is working on it at present.YES! its always possible to revert back to official rom and Bootloaders (IPL/SPL),only the method differs for both the devices.
zabardast_1 said:
Which is your device,G3 or G4 ? and which rom is working on it at present.YES! its always possible to revert back to official rom and Bootloaders (IPL/SPL),only the method differs for both the devices.
Click to expand...
Click to collapse
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..
mohen said:
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..
Click to expand...
Click to collapse
Hi,
Your device is already flashed to hardspl so do not flash any official ROM's Or you will surely brick your device. Which is the maker of your wizard?
Short details of hardspl :
ipl 2.21.0001
spl 2.21.olip ( Is known as hardspl )
Follow these steps to remove hardspl:
1. Download Qtek 9100 G4 Main IPl&SPL.zip which is attached below. ( Do no worry, this zip is for all th G4 Device which have 2.21.0001 SPL/IPL )
2. Download softspl from here : Link
3. Extract softspl and the provided zip file.
4. Go to extracted folder of the Qtek 9100 G4 Main IPl&SP and copy nk.nbf file.
5. Go to extracted folder of the softspl and paste the nk.nbf file*.
6. Connect your wizard and make sure your activesync is fully connected.
7. Run START-sSPL.exe from softspl folder.
6. Wait till the dos windows apps ends to 100%.
7. Dos windows closes and ruu will be opens.
8. Take a look on you wizard screen, that the screen should be fully white and no active led on top of the device ( I mean network led, power led, wifi led or bluetooth led).
9. If step 8 is OK then you continue to flash the spl/ipl. Follow the RUU instruction to flash the ROM.
10. It completes in 1 - 2 min. Till then do not disconnect or open any softwares. Keep it mind that, your flashing spl/ipl and if something goes wrong, you will surely brick your device )
11. Now you removed hardspl.
Note : *nk.nbf and START-sSPL.exe files should be side-by-side.
Steps for flashing official ROM:
1. Download the official ROM ( Note the official ROM should be the same maker of your device. I mean, If you have a qtek 9100 then you should download qtek official ROM.
2. Extract the official ROM which you have downloaded.
3. Run the ROMUpdateUtility.exe.
4. Now you can continue to flash the ROM.
5. Thats all, Now you have the official wm5 ROM.
At unknown percents RUU may hang but you do not afraid or disconnect the device. Wait some time it will surely omplete the flashing.
Warning :
* Before flashing, make sure you have ups for the pc.
* Use windows xp.
* Before flashing, make sure you have not running any background software.
If you have any trouble, Plz PM or post here......
Good Luck
Thanking You
mohen said:
i got g4, with
ipl 2.21.0001
spl 2.21.olip
i have WM6.1 rom that cooked by newbie 1221.
the question is, do i need my old SPL and radio ? cause i know i can't find them, it's too old .
i have my old rom from my service provider, just afraid to brick my device..
Click to expand...
Click to collapse
Ok,no problem,as your phone is HardSPL,first remove HardSPL,reflash back to official original Bootloaders(IPL/SPL) and then afterwards reflash the official stock rom with which your phone came,its all very easy,just read and follow this link :-
http://forum.xda-developers.com/showthread.php?t=342744
And,just don't worry about the old Radio Rom or old IPL/SPL,as its permissible to upgrade by the carrier,just tell them,if they ask,that you upgraded to latest IPL/SPL and Radio Rom,they won't bother.
Its only the Custom Rom and CID unlock they object to,as long as official stock rom is working and G4 devices don't get CID unlocked,it'll show as CID locked,therefore,they have no objection.
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
htcwizard123 said:
Hi;
I recently bought XDA mini S & today morning when i tried to upgrade to WM6 my XDA with following file i downloaded :
"HTC.Wizard.Faria.WWE.CE.v5.2.318.AKU4.0.0.01.WM6.Rom.Upgrade.USE_AT_YOUR_OWN_RISK.rar"
I ran "romupdateutility.exe" from the installer. It went fine till 99% but suddenly i got error "Error ocured during installation. Pls refer to readme file" but no readme file available
Now my problem is, i am stuck on RGB Screen
IPL 2.21.001
SPL 2.21.001
USB
and can't proceed further.
Can anybody help me out pls.
Thanks.
and it
Click to expand...
Click to collapse
Search for Wizard Love ROM , download it and flash it. And hope ..
Read The Wiki
Sounds like you didn't unlock your phone before flashing, so. . .
READ THE WIKI!!!
THEN --
UNLOCK YOUR PHONE!!!
AND -- FOLLOW DIRECTIONS!!!
Of course THERE IS a Readme file
htcwizard123 said:
.............i got error "Error ocured during installation. Pls refer to readme file" but no readme file available .............
Click to expand...
Click to collapse
Right click the RUU that you run and extract the files in it, you´ll find a Word doc file that probably you should´ve read before....! Wizard Love or your original ROM will take you out of the tricolor screen, good luck!
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
There are already step by step guides - read them. If you can't find them, read them, and understand them, then don't flash your ROM. There's an entire board dedicated to the G4 version, but I guess you didn't see it.
http://forum.xda-developers.com/forumdisplay.php?f=343
Try this outline for SIM unlock
htcwizard123 said:
I am on G4 PDA, can anybody post "Step by step" guide how to unlock my PDA & then upgrade to WM 6 . It will be very helpful.
Thanks in advance
Click to expand...
Click to collapse
For SIM Unlock
http://forum.xda-developers.com/showthread.php?t=265928&page=47
For upgrading READ and UNDERSTAND the content of the first sticky of the G4 section. If you are going to save some money not paying to imeicheck you should consider spending enough time reading the diverse threads. Good luck!
DON'T CID UNLOCK YOUR PHONE USING LOKIWIZ . YOU WILL BRICK IT !!!
You have a G4 and it can be unlocked only by http://www.imei-check.co.uk/
You don't necessarily need to unlock it. It's easy. This are the stepps to follow :
1. Search for "Wizard Love ROM"
2. Download it and flash it using RUU.
3. Wait untill it's flashed and the customisation is finished !!!!
4. If you want to flash to a custom ROM, just download a rom of your choice
5. Extract the nk.nbf using WinRar or similar.
6. Download ShellTool
7. IMPORTANT !!! Read SHELL TOOL Readme and follow exactly to proper flash your phone
8. Enjoy !
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
i forgot lol
Just plug it in the USB and start flashing the Wizard Love ROM by RUU
htcwizard123 said:
But Guys my PDA is currently showing RGB screen & i am stuck on this
IPL 2.21.001
SPL 2.21.001
RUU
USB
How to proceed further.Pls instruct me step by step as i am newbie
Click to expand...
Click to collapse
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
newbie2 said:
We still need to know for sure whether you have a G3 or G4. You say you have a G4, but your IPL/SPL ends in 001, which is a G3. A G4 chip will have 3 zeroes -- not 2 zeroes.
So, which is it for sure?? You can't do anything until that gets cleared up.
Click to expand...
Click to collapse
That's a G4
G3 is like : 2.XX
G4 is like : 2.XX.XX1
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
I guess the Wiki is wrong, then. . .
I've copied and pasted directly from the Wizard WiKi. If this information is wrong, someone needs to correct it.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.). _SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_ _SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
That information was taken directly from this thread. It's the same thread I refer people to in order for them to find out if they have a G3 or G4. If it's wrong, I'm sitting here with egg on my face. . .
Great !!!!! U saved my PDA .....Thanks a lot for the help. I will never make this silly mistake again.
Thanks again.
htcwizard123 said:
Ok, i Flashed my device with "wizard_love rom" & now i can able to start my PDA but after configuring screen, my PDA stucks at Pop-up menus Window, i can still able to connect with Active Sync on my PC.
Pls help me to move forward.
Thanks in adv.
Click to expand...
Click to collapse
Do a hard reset. (hold the comm manager button and the voice speed dial and press the reset button. when asked, press send and it will format.)
Don't cancel the customisation.
@newbie2 now i am confused
@htcwizard123 What did you do ? Who was right ?
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
anichillus he has a G3 device... its obvious
htcwizard123 said:
Is hard reset is required after flashing the PDA ? I was stuck on POP up menu screen but when i follow the instruction for Cut & Paste it booted normally
I have let completed all the setting to load & again the PAD restarted normally.
Pls let me know if i do the hard reset ?
Thanks again for ur help. I am doing flashing 1 st time that's why i said i am newbie
Click to expand...
Click to collapse
No hard reset needed if it's all good. But troubles me ...how could you select the pop up menu before the cut/paste....tutorial appeared...??
Also...you must be lucky that you didn't brick your phone. So next time, think twice and flash only after you're sure that you know what you're doing.
Remember : Don't flash anything that contains IPL/SPL !!! (a G3 bootloader will brick your G4. And from now on flash using ShellTool or unlock your device via www.imei-check.co.uk - that will cost you some money)
DuKe_GR said:
anichillus he has a G3 device... its obvious
Click to expand...
Click to collapse
Why you say that ? I still think that 2.xx.xx1 is a G4
Also i don't think that you can flash a G3 with Wizard Love
Thanks again for all ur help.
But i am sure i have G4 device, i think it is not CID unlocked that's why i came across this issue. Do u think i have G3 device ?
Now i want to Flash it Windows Mobile 6, shall i follow instructions which is given in "G4 step by step install wm6.zip". Will it work fine ?
Pls help
Hi,
I downloaded Official WM 6.1 Upgrade from HTC http://member.htc.com/downloadfiles....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
and after running that... My system is dead slow and also unable to install few program like Schap's Advance Configurator etc and other issues like
System Reboot time increases....
GPS taking too much time for a Fix
Menu Pop down slowly...
Stucks quite often
.... And after every hour or so the Message popup like that " Please Inform Microsoft about this issue ...... "
Since i am not a computer Geek... Please advice some simple solution ...
Though i also download the official RUU from HTC which released on 21-2-08 but when i run that it tells me that " THIS UPDATE IS NOT FOR YOUR DEVICE " after the SPL screen...
So, is there anyway that i revert back to original System dated 28-8-07
Ur help in this would be highly appreciated....
And PLEASE accept my appologies is this issue has already been raised here...
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Thanks for the reply.....
thomassster said:
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Click to expand...
Click to collapse
Well it takes time to respond to the command... e.g. if i click on the START then it took quite a time for a menu to pop down....... as far as CID unlock... i am not sure....
But i purchased my tytn II from UK as a sim free unit @ 455 pounds... and before that WM 6.1 upgrade, i never played with the ROM or firmware... no SPL nothing anysort run on my unit.... I just run the RUU directly from PC and follow the on screen instructions....
which spl are you using ?
kuzco1 said:
which spl are you using ?
Click to expand...
Click to collapse
currently in Bootloader it shows...
KAIS130
SPL-3.28.0000
CPLD-8
Hello guys I have One problem. When I follow the steps for flash for my new rom I can't Continue. I press Next , Next step by step when I arrive to finish mirror where is the Image Version , there was not signed Image version there was empty I try with "Love Script" and Skynet "TechTeamup_Manila2D_NSN__v1.00_HTCWizard" I want flash my Qtek 9100 G3 with 6.5 rom with manila and touch flow. Can anybody help me ? How I can upgrade my phone to 6.5 now I am with 2005 version. There is System information WIZA200.
I am having trouble following what you are saying.
Can you try again with more words?
What is your native language?
If you want an English WM6.5 with Manila 2D, the choices are CR96 (in my signature) or one of Haseeb's Tech Teamup ROMs. Neither are very new, but Wizard ROM development is mostly stopped.
If you want German, the Cyberdyne is probably a very good ROM. He has been developing for a very long time. I don't know because I only speak one language, English.
sory for my bad English I try to install Manila 2D rom but in finish mirror where is the "Your rom is bla bla bal ... " will be changed with new rom version " rom version ..." and there was have one signed "Your new rom version is : " and there was empty . In readmi screenshots I see there was anything as "Your new rom version is : 1.20.1 " but when I try to install new rom in my mirror there is empty. I was install english rom version with manila . I can't find more roms for installing more time ago there was many but now I see soo small. Can anybody help me?
I try to flash my Phone with different rom. Everything Finish right but after hard reset with new rom old rom was start. I can't change my rom with 6.5 . I was flash my phone with one 6.5 from this forum step by step everything is right and in finish when I make master reset with new Windows mobile it was old rom not 6.5 which I install on my phone. I try to flash with two different rom after flash with second 6.5 rom Start mirror was change colors where is SPL IPL but old rom 2005 is start after that please help.
I believe you were able to run RUU and it claimed to be successful, but when you booted your phone, you had the old ROM. It sounds like perhaps your phone is not unlocked.
First determine if it is G3 or G4, then follow the instructions:
G3: here
G4: here
Maybe you were already following the instructions for G3, but you have a G4, so the instructions did not work. Read the beginning of the instructions carefully and determine whether G3 or G4 by the SPL version number.
Many of the older ROMs can still be downloaded, if you go back many pages in the forum. But first you want any ROM. After that succeeds you can choose by experimentation.
n2rjt said:
I believe you were able to run RUU and it claimed to be successful, but when you booted your phone, you had the old ROM. It sounds like perhaps your phone is not unlocked.
First determine if it is G3 or G4, then follow the instructions:
G3: here
G4: here
Maybe you were already following the instructions for G3, but you have a G4, so the instructions did not work. Read the beginning of the instructions carefully and determine whether G3 or G4 by the SPL version number.
Many of the older ROMs can still be downloaded, if you go back many pages in the forum. But first you want any ROM. After that succeeds you can choose by experimentation.
Click to expand...
Click to collapse
Thanks !
I see my phone and SPL and IPL last number is similar as " 1.27.17 " . I read any tutorials and I think my phone is G3 and I think it is CID unlocked how I understand is this phone CID unlocked and how I can unlock it ?? And any worker links for 6.5 roms with manila and touchflo .
Thanks
I was hear sound when starts the flashing rom and my phone was vibrate . I read this link :
http://forum.xda-developers.com/showthread.php?t=285435
for CID unlocking but don't know can I make this unlocking because I think it is difficult for me because my English is not very good. But i understand them with sometimes with dictionary. Do you think my phone is CID lock for install new rom ? I don't know what I do for install new rom now . It is Lock my QTEK ?
taka87 said:
I was hear sound when starts the flashing rom and my phone was vibrate . I read this link :
http://forum.xda-developers.com/showthread.php?t=285435
for CID unlocking but don't know can I make this unlocking because I think it is difficult for me because my English is not very good. But i understand them with sometimes with dictionary. Do you think my phone is CID lock for install new rom ? I don't know what I do for install new rom now . It is Lock my QTEK ?
Click to expand...
Click to collapse
Yes, you have a G3.
Perhaps it is still CID locked.
Try following the instructions again from the beginning.
I wish you good luck.
The "CR96" link in my signature has TouchFlo and Manila 2D, and is based on 6.5.
Hello , again. I make CID unlocking in my computer which is with Windows 7 everything continued Ok step by step as in this link :
http://forum.xda-developers.com/showthread.php?t=285435
But in this link 1.05 ROM is missing , I think this unlocking can make with not this rom. I continue with steps after number 4. I make everything and it is finish Right. But when I install new rom CR96 Everything is old. I see again only 2005 rom . I will make this unlocking again on Windows XP . Do you think this method will be successful for CID unlocking ??
For the 1.05 ROM, do you mean this link?
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
The file is there. Use the red buttons on the right side of the screen.