Help About Elf - JAMin, XDA Neo, S200 Software Upgrading

I was updating my HTC TOUCH, elf, I did besteira indeed, as played any rom it without knowing what tava doing, I saw a beautiful Roma, the prophet VIII and tried to pass but before he gave error, and not now locked exits the home screen, writing smart mobility, and is on top writing O.S 6.0.0.1 of red, to desesperando what ????, ja tried to help me install a lot of rom pra himself, but always when arrives at 3% of the mistake, I think I need to unlock it, but I am so as linking it in usb in activesync not go, then it does not pass the files of release, someone knows what I can do, thank you .

i think you screwed your elf by flashing prophet viii dude....

help
wanwarlock said:
i think you screwed your elf by flashing prophet viii dude....
Click to expand...
Click to collapse
Certainly, I did not know, now he ta locked, I wonder if someone knows what I can do now unlock, he ta arrested in bootloader, I have to restart entirely, leaving the rom blank .... I believe you know some way of to do this? Thanks.

Related

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

Vox Update SPL (USPL) 1.16

Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange

Anyone can help me though msn

Hello
Are there anyone who can help me Flashing my Wizard to a touch?
Pm me for my msn
My cid is locked
http://forum.xda-developers.com/showthread.php?t=298613
as self explanatory as can be
Thats not my problem..
Okay, here it is:
My cousin has a S200 and i have a wizard, i went to him and he said "Oh yea, of course i know how", so we used a program i think Sspl and to the left there was a picture of his prophet and we pressed "upgrade" so my problem is now that i have a strange rom on my phone, and belive me, its VERY slow and when i want to see battery status it says "Unknown" and it doesnt recharge i think (No orange light). My phone is CID locked, so i want to unlock it, but when connecting to a computer it doesnt connect proberly. Fx. in Wizard service Tool i can "Enab. Rapi + Unsigned Apps" but i cant Read Cid, it says my device isnt connected. (Wish i could before) so i need help down grading to my old software and unlocking and finally, flash it to a touch...
Soz bad english
NB! Its G4 - This is my first Windows mobile flashing, but i am an expert on flashing Sony ericssons
Versions:
IPL 2.18.0001
SPL 2.18.0001
GSM 03.02.11
OS 2.20.7.34
Oh yea thanks guys..
Figured it out myself
Now running with BD

Please help with Treo 750 Unlock!!!

Hi,
i have Treo 750 want to unlock!!
IPL:0.20
SPL: 0.24.0000'
i try with Cheeta unlocker and MAGIC Unlocker, both not work.
it this because of the new SPL0.24??
can anyone give me instruction how to please!!
thanks
i had same problems with my treo. first like oli says in his first post about hard spl make sure you have net compact framework 2.0 on your computer. what worked for me was in your c drive there is a folder called tempche. delete that file then run unlocker again. i only did first step on my treo just so it would be hard spl'd. never did step 2 and so on cause i didnt feel a need too.
thanks man, just delate the tempche folder then everyhting run smoothly.
cheers
Good for you!
Hi:
Where do you find the SPL and IPL information?
And can you tell me what SPL actually is?
Thanks!
spl
im not sure about what spl means but i do know that you need to have it done in order to install a cooked rom. it basically unlocks your phone so you can flash different roms that the chefs cook. there really isnt to many people cooking roms for the treo. theres only about 3 or 4. i think everybody got different phones so thats why your not getting responded too very quickly. i too have a tilt and a treo and i like to bounce back and forth between phones. i have the wm 6.1 lite rom on my treo. if your looking at just upgrading from wm 5 to wm 6 you dont need to do a hard spl. stock roms allow you to flash without unlocking your phone. im not a computer genious here but i will try and assist you however i can. ive been in your shoes before trying to figure all this stuff out.
i forgot to answer your question about where to find the spl. it shows up in your bootloader screen. you can see it by pressing down the lower left side button and pushing soft reset which is located on the other side where you put your mini sd in. there is a small whole that you use your stylus to push in. you can just soft reset again to get out of the bootloader screen.
helpeee
i used cheeter unlocker. I
did step one and two
successfully. But at the end i get
the debug error which some
people got. So i copied htc herm
unlock v3 to the phone. I ran it
from phone and selected sim
unlock and it was succesfull. But
when i turn on radio, i get "you
have tried 5 times, wait for time
out ****".
Please anyone, what am i doing
wrong, or what should i do to
unlock my machine?? It has wm6
from at&t.
_________________

Ruu error 262

Hi all
I am trying to flush my tytn2 rom to a cooked one.
But i keep getting the same error in the RUU
ERROR 262 update ERROR
The ruu goes as far as the pragrass bar and stays on 0%
Thank you in advance for your help
Read this first mate
http://forum.xda-developers.com/showthread.php?t=433835
thanx for the link i did read it first before posting i tried to do a hard spl using kaiser hard spl V1 nut i had the same problem.
I don't think i need to do a hard spl because my phone is not networked branded.Here in south Africa the expensive phones dont get branded.
I did upgrade to wm6.1 but it made the phone to slow for my liking
thank you fore your fast response
lol did a hard spl working fine thanx for the help
late post, edited
it was something about the problems you get misusing things in your house like flushing expensive phones

Categories

Resources