Ruu error 262 - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

Hi all
I am trying to flush my tytn2 rom to a cooked one.
But i keep getting the same error in the RUU
ERROR 262 update ERROR
The ruu goes as far as the pragrass bar and stays on 0%
Thank you in advance for your help

Read this first mate
http://forum.xda-developers.com/showthread.php?t=433835

thanx for the link i did read it first before posting i tried to do a hard spl using kaiser hard spl V1 nut i had the same problem.
I don't think i need to do a hard spl because my phone is not networked branded.Here in south Africa the expensive phones dont get branded.
I did upgrade to wm6.1 but it made the phone to slow for my liking
thank you fore your fast response

lol did a hard spl working fine thanx for the help

late post, edited
it was something about the problems you get misusing things in your house like flushing expensive phones

Related

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

please help me its urgent

hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
i just brought this phone from dubai last month its under warranty will imate people sort this problem ????
guys please give me Advice and solution for this IPL SPL Problem
Thanks in Advance
Hello, I feel sorry for your bricked Prophet but here some informations. First of all, there is no need to write in big red letters. This usually annoy people or make them feel offended. You are not more important than others - who have their own problems as well. Writing normally would usually give better chances for a reply.
Here some feedback for your problem :
a) As long as you can get back into the boot loader as long everything is recoverable (hold camera button and reset and keep the camera button pressed until you get into the boot loader with the different colors). As long as this is still there as long you can recover.
b) Get an official ROM from your service provider for your Prophet and flash it back.
c) Only problem you might have is the updated boot loader (2.20).
big red annoys me.
You did not try to flash your G3 phone with a G4 rom now did you? (or G4 with G3 rom..)
As Spatzm said: Try to get into bootloader. If that works try updating again with the official qtek 2.20 rom. (here). And READ that topic about how to install and get yourself the ROMUpdateUtility_NoID.exe from the ftp (see wiki).
Since you tried to update with the 2.20 rom (which is the base of Jesters rom) you cannot downgrade, that's why you need to use the 2.20 official qtek rom (which is suitable for both G3 and G4). You can only downgrade if you have a CID unlocked G3 (if you don't know if it's CID unlocked then it's not ) with a G4 device you cannot downgrade to put it down shortly.

Ipl Spl 2.21 Solution.!!!

my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Wow!
Wizard bootloader in a prophet!
I bet you wont have the battery problem with a wizard's crossbow rom!
bootloader
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
alphazero said:
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
Click to expand...
Click to collapse
maybe you can repair your bootloader now.
I have an idea of how you could do it with g3.
Is your cid locked?
Is your phone g3 or g4?
phone
its g4 xda neo cid locked
UPDATED NOW NEW TESTS DONE. IPL SPL = 2.21
if i use prophet roms now everything is slow on device not usuable. i have to use wizard roms LOL. only problem then no sound is working. but replacing dll from prophet gives u sound back again. ........ THIS IS ****ING BULL****. anyway its usuable again now. i flashed now the fucing pbootloader of wizard into my device..........................
Hardreset does not work anymore if holding camera and other button it goes again back to bootloader now i need to find out how u do a hard reset on wizard LOL.
anyway i need a IPL AND SPL From prophet ............... extracting ipl and spl from qtek prophet and traslating it making a new nbf results in a flash process but after i stays on old IPL SPL ....................... ill report soon more about this strage problem having a wizard bootloader on Prophet.
omg this is ****ing weird
that that works is really strange^^ thank you though again you rescued my device hope its gonna work for me I'll report in the next days...
so if I'm doing thats right the whole thing is working, while you are connecting the wires get don't plug the wall chargare in so you don't have elictricity and cover up the rest of the pins im not sure if thats necessary but you don't wanna brick your phone even more the phone is turning of though as soon as you disconnect the wires... i'm having a prophet rom on it right now i'm trying a wizard rom now...
alright im running the wizard aku 3.2 rom now. its working very well except that i have to wires coming out of the back of my pda.
but ipl downgrade might be possible from there... so thank ýou alot the solution works
your welcome
i will make a paypal account now so u can donate me i guess this solution is very good and no need to pay for it =)
UPDATE: IM NOW ON 2.26 TMOBILE WIZARD NOW WITH IPL AND SPL 2.26 THIS IS WORKING ****ING GOOD AND TRUST ME ITS FASTER THAN MY PROPHET WAS EARLIER WITH PROPHET BOOTLOADER.
GET THE TMO 2.26 from FTP and flash it. it will update ur device (IPL + SPL )too 2.26 never mind of it
IPL DOWNGRADE is NO PROBLEM FOR ME u can extract rom hex edit the ipl part and version number i did that already my ipl now is again to low number (custom) 2.01 but spl i coudnt find out to edit. im working with winhex and primary memory editing since this is very dangerous i dont suggest to do it. only experienced users should do that
WARNING WARNING WARNING !!!!
I WANT TO REPEAT AT THIS POINT AGAIN DONT TRY THIS ON WORKING DEVICE!!! ITS JUST A SOLUTION IF UR DEVICE IS ALREADY DEAD!!!!!!
alphazero said:
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Click to expand...
Click to collapse
can u take a pic for the wires?
wires
NO need to i will explain in detail.
1. Take ur phone and put it on ur table =)
2. Turn it so u can see the camera
3. On the right u see 6 Pins.
4. The Pin 1 is nearest to Camera
5. Pin 5 would be far away from camera.
u got it now ?
it worked for me with the sixth pin to by the way but that might be why it doesn't work without the wires for me yet.
did you cover up the other pins alphazero?
you were able to flash a lower bootloader back onto the device right with some kind of hexedit application or something?
I think a lot of users would be glad if you could upload a rom that can downgrade the ipl and spl including me , as you said it requires a lot of skill to cook the right rom...
thanks man
Just a quick one. If you can downgrade the ipl and spl to 1.xx.0000 or 1.xx.0001, could it be possible to do CID unlocking?
Downgrade
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
alphazero said:
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
Click to expand...
Click to collapse
Status: IPL DOWNGRADE OF ANY G4 successfull !
SPL DOWNAGE OF ANY G4 under work !
haha be patient and 2 minutes later you post it
spl 2.21 is working normally on the prophet anyway doesn't it?
can you upload that downgrade?
how is it coming ...did you find out anything new?
if you manage to downgrade ipl and spl to prophet version you are where you were before you flashed the wizard rom right?
answer
yes it would solve the accident wizard g4 rom flash on prophet!
but isnt spl on the prophet 2.21 anyways and only ipl is 2.15?
Dear Alphazero is it possible to solve wrong flashed g3 with jesterz g4 rom so now i can be only in bootloader mode and i can start flashing my prophet but please tell me how and what with On my bootloader screen now is written IPL 2.10 and SPL 2.20.0001. Please help me repair my prophet if it is possible
Should I do something with cutting battery pins?
uhm no the battery pins was because our device did only turn on if it was plugged into the charger, which meant you couldn't plug it into the usb at the same time to flash a new rom.
your problem is different and can't be solved with that solution... sorry sd goldcard i guess
Yes but i can only connect to mini usb and from bootloader i can flash it with battery full so please tell me shell i cut some pins from the battery and what with should i try to flash

After WM 6.1 official ROM Upgrade ... system problems..

Hi,
I downloaded Official WM 6.1 Upgrade from HTC http://member.htc.com/downloadfiles....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
and after running that... My system is dead slow and also unable to install few program like Schap's Advance Configurator etc and other issues like
System Reboot time increases....
GPS taking too much time for a Fix
Menu Pop down slowly...
Stucks quite often
.... And after every hour or so the Message popup like that " Please Inform Microsoft about this issue ...... "
Since i am not a computer Geek... Please advice some simple solution ...
Though i also download the official RUU from HTC which released on 21-2-08 but when i run that it tells me that " THIS UPDATE IS NOT FOR YOUR DEVICE " after the SPL screen...
So, is there anyway that i revert back to original System dated 28-8-07
Ur help in this would be highly appreciated....
And PLEASE accept my appologies is this issue has already been raised here...
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Thanks for the reply.....
thomassster said:
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Click to expand...
Click to collapse
Well it takes time to respond to the command... e.g. if i click on the START then it took quite a time for a menu to pop down....... as far as CID unlock... i am not sure....
But i purchased my tytn II from UK as a sim free unit @ 455 pounds... and before that WM 6.1 upgrade, i never played with the ROM or firmware... no SPL nothing anysort run on my unit.... I just run the RUU directly from PC and follow the on screen instructions....
which spl are you using ?
kuzco1 said:
which spl are you using ?
Click to expand...
Click to collapse
currently in Bootloader it shows...
KAIS130
SPL-3.28.0000
CPLD-8

G3 pophet (Qtek S200) flashed with G4!

I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Will no-one help??
RUU_Prophet_220734_2207114_024721_NVID.exe try to find this file
Tried this, but the flashing failed.
noonas said:
I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Click to expand...
Click to collapse
Probably you shouldn't have given it to your friend....There must be a fix somewhere.
I'd be asking your friend to find it. Good luck.
try this
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It may not help with mixing the G3 and G4 up.....
I am afraid the phone is bricked, as i seem to remember from the time i had my Prophet, flashing with the wrong G type firmware cause an irrevirsible brickage as they are completley different chips on the actual device... someone had a "gold card" method they were researching but i dont think it really got anywhere!
mm the prohet is bricked im afraid. I have read many posts in the past in the prohet mobile 6 section, if you go through the posts and spend some time you will see the advice given to those unfortunate souls who did the same thing.....
Give them all a go, you have nothing to loose!
no problem
don't wory my frind i fixe my device and you can just try a rom with no VondorID they have 3 i fond in the forum the first don't work for me but the 2 work very well !!
don't wory don't wory don't wory

Categories

Resources