am trying to setup bb connect on my touch pro2 (sprint ver) but when i do the softreset the phone just keeps restarting after the htc logo appears, i have traced to the setmodelid.exe file. am i doing something wrong
Related
Hey guys!
While working on my PPC this weekend, I noticed that the system froze while just trying to open NYDITOT Virtual Display.
I tried doing a soft reset and after doing so the system freezes at the "Welcome to T-Mobile" bootup screen and it does not go into the OS (windows Mobile 2003 "Non-SE")
I tried pushing the soft reset button with the device OFF, without the battery, without the sim card, and nothing seems to work.
I cant even re-load the original ROM as Active Synch doesnt see the device due that I dont get into the OS.
Now luckely for me, T-mobile advised that i only had a 3 month warranty with them, which of course "expired" so i was hoping someone could suggest something that might help me resolve this problem.
Any help will be greatly appriciated.
Will V.
Phone shows up on my computer as htc tytn II, after installing Sleuth's rom but sync center shows it as disconnected.
i dont get an option to set a new sync.
any ideas?
fixed it....by restarting windows...
Hi there guys .
I've been searching and searching, and trying and trying, but I can't seem to get past this Error [262] when I'm trying to upgrade my ROM or Radio (HTC Diamond).
What I'm doing is this basically:
I downloaded DiamonCustomRUU.exe, put it in a folder with the radio/rom (say Diamond_Radio_1.00.25.05.nbh), I connect my HTC Diamond to my pc via usb, activesync is on, I start up the RUU, go through all the steps, then at the end when the update 'starts', my phone goes off, starts up in the 4 coloured screen, activesync stops, then my phonescreen turns grey with the progress bar (stuck at 0%), and on my laptop there's a progress bar as well. It does nothing, and after about 5 minutes, I get the Error [262].
I reinstalled Activesync, but no changes. I installed HardSPLL though. I tried another USB-port, doing it without my firewall on (someone suggested it, yes I'm desperate)... I have no idea where to go from here.
Can anyone help? (sorry if this is the wrong section..)
Love
Had the normal (signed)SPL instead of the hardSPL. Can be locked
I was updating my phone from windows mobile 6.1 to one of Ryan Moguls 6.5 updates today. Everything worked alright, it turned on, loaded everything, but only stayed on for about a minute. After soft resetting it a few times it is now stuck on the three colored screen. I've tried hard resetting it (the prompt comes up, I hit yes), but then it just goes back to the same three colored screen. The screen says:
TITA100
SPL-1.2.Olipro
& then at the bottom it says Serial.
I've tried putting wm 6.1 back on it, but I keep getting error 290.
I would REALLY love some help!
I managed to use the microSD method to get windows 6.5 & the needed radio for it. My problem now is that it is stuck in a reboot loop. It'll stay on for about a minute and then reset. I figure it is because I need olipro 2.40, but i have a 64-bit computer that won't support it. Any suggestions?
OS version of the phone was Android 2.3.4.
I inserted CWM (985hPaKicK's Edition for Optimus One), rooted the phone(by installing zip from the recovery), and then got it to overclock a bit by flashing a custom kernel with AnTuTu CPU Master. Finally, I replaced wireless.ko file to get the WiFi working.
The phone was working great for a while since then, even though it would reboot quite often. Soon I found that the problem causing the reboots was the overclock being too high, and there seemed to be no problem at all since I changed the CPU clock to about 690Mhz.
However, a problem broke out unexpectedly.
As I was using the phone without a SIM card at first, I set the clock manually. However, then, I inserted a SIM card. The phone recognized it and connected from its first boot with the card, but it couldn't connect to 3G network. There was animated 3G indicator on the top bar, saying "H", which is HSDPA from what I assume, and the indicator would turn green from time to time, meaning the phone had meaningful connection with the network; but when I launched apps requiring internet, they just didn't work.
I found that the time was going about 3 minutes slower than normal, so I assumed it was problem with time configuration and set time configuration to Network Sync. Then the phone rebooted.
And it just got stuck on the LG Logo screen.
Whenever I try to boot the phone, while it boots okay until the LG logo animation, after that the phone just gets stuck there.
And here are the situations right now:
-If I don't turn the phone on and just plug it to the charger, battery animation gets displayed normally.
-Pressing any of known button combinations won't boot the phone into recovery or emergency mode.
-When I plug the phone to the PC, The LG mobile support tool recognizes it correctly; I have tried running "Upgrade error fix" from there, which seemed to be getting the phone into download mode and flashing original ROM. The tool said it was successful, but it didn't save the phone either.
-Whenever I plug the phone to the PC, while the device manager often recognizes the phone as "LGE Android USB Composite", ADB does not recognize it.
-The phone gets hot when it is left in the LG logo screen for a while, so there definitely is some kind of activity.
If anyone can tell me how to unbrick the phone, or even how to get it into recovery mode, it would be really appreciated.
Hi
Please post in the Optimus One Q/A for support.
http://forum.xda-developers.com/optimus-one/help
Good day !
No response
Thread closed !