When I plug my TyTN II to my laptop or pc, The active sync icon starts to lookup, but after 1/2 minits i get screen that it was failed to connect. I have this problem since trying WM5Storage. Does someone know how to fix it?? Cause I want to upgrade to dutty's newest rom.
Ps. It does sync with my exchange server but not local with a pc or laptop.
You should check if WM5 Storage is activate (left soft key in the program screen), if yes you should deactivate before connecting with ActiveSync.
I don't know if you have to restart the device, probably yes...
Ciao.
Ensure that usb advance connection tab is unchecked in connection settings,
also you can sync when using wm5torage so you have to disable probably have to restart both computer and device.
If it doesnt work un-install mobile device centre and re-install again, ensure you back up your pims first.
See if it works.
It seems wm5torage mess something up in your connections
let me know if those works
Dear Sir
This is the fastest rom I have ever had in Kasier, whilst the Xt9 did not work but I have deleted it. I noted no issues from the functions I used to use.
Good work!!
leochan2005 said:
Dear Sir
This is the fastest rom I have ever had in Kasier, whilst the Xt9 did not work but I have deleted it. I noted no issues from the functions I used to use.
Good work!!
Click to expand...
Click to collapse
My friend told me I had a much faster rom in november and nothing compares to it
adreyanholley said:
I know this has nothing to do with the topic but Dutty could you make a rom for the Hermes because I love the roms but are not able to use them?
Click to expand...
Click to collapse
There are lots of great rom in the hermes forums, Maybe in he new years I havent got a hermes but I might do one for old time sakes. fingers crossed
I too am having problems sync'ing my Tilt. When I go to uncheck the "advanced network functionalilty" in USB to PC, I get "Failed to disable RNDIS to use Serial"
Please help!
I found an answer after googling "Failed to disable RNDIS to use Serial", where someone mentions a bluetooth COM entry they found and deleted that solved it.
So, I look, find a COM entry from when I was playing with my (old) bluetooth GPS, deleted it, and now I'm able to uncheck the setting.
Now to see if I can finially sync with my PC...
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Yankee802 said:
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Click to expand...
Click to collapse
I am also having trouble with Vista...But I am able to have my Tilt Sync on Windows XP. I think I might have an issue just with Vista but it appears that yours may be phone related. Have you tried a hardreset on your device?
alltheway said:
I am also having trouble with Vista...But I am able to have my Tilt Sync on Windows XP. I think I might have an issue just with Vista but it appears that yours may be phone related. Have you tried a hardreset on your device?
Click to expand...
Click to collapse
I have this problem in XP, windows server 2003, vista. Also on diffrent computers + laptops.
Yankee802 said:
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Click to expand...
Click to collapse
Did you find a fix yet?
Nope, I realy don't want to do a hard reset, but might friggin have to.
I was hoping to find another soloution.
I will say this, last time I was able to sync anything, it was my 8525 before I flashed a WM6 ROM, but I know it's not a WM6 - XP compatability issue, others here have no problems. I know Vista has issues, so I'm not even worried about that right now. My Tilt still has the factory ROM, and still others have the same setup with no problems. I can't tell you how mad I'll be if I do a hard reset and it still doesn't work!
Would be nice to be able to copy the pim.vol to/from the memory card and have Outlook be able to import the databases from it.
im having same issue with wm6 ever since flash but wing and mda still sync running wm5 think its some sort of hardware issue havent been able to find anything on it though if you figure it out please post..... by the way i tried hard reset didnt work
HTC TYTN - Not Synching
Hi all,
I have HTC TyTn, which was syncing fine with my laptop. recently it stopped synching. i thought it could be an issue because of the my OS. i have reinstalled my PC OS and it still doesnt work.
any solutions to make it work without hardreset as i have got a bit of data on it to save before i do anything with it.
SFProphecy said:
Hi all,
I have HTC TyTn, which was syncing fine with my laptop. recently it stopped synching. i thought it could be an issue because of the my OS. i have reinstalled my PC OS and it still doesnt work.
any solutions to make it work without hardreset as i have got a bit of data on it to save before i do anything with it.
Click to expand...
Click to collapse
Dunno, I had never witnised this problem. Always had synced with all my devicec. Try the HTC helpdesk and if they can't help you they will tell you a hard reset aswell
Unable to sync using USB...
When I sync using Bluetooth, all is fine & dandy. BUT. When I plug my Tytn II (MDA Vario III) into my USB port, it starts installing a new "Windows Mobile Remote Adapter" (I run Vista, with Vista SP1, BTW). This fails, with a message "The required registry key is missing"? I have tried removing any trace of Windows Mobile Device Center, reinstalling that, installed the MS driver update, no joy. Obviously,Vista being a Microsoft OS, it doesn't tell me WHAT THAT bloody registry key is/is suposed to be!!! Help?
I have a Treo 750 (Telstra, Australia) and today decided to update to WM6.
I have it synced to my PC running Vista Ultimate. Did this just before the install, then ran the install and half way through it crashed. After resetting the Treo, it came up with the initial install screen (date/country/etc). After completing all this it went in and it was still WM5... so obviously the update failed. But all my settings are gone (including email/contacts/etc, which are still on my PC).
BUT, now the computer won't recognise it when i plug in via USB, so I cannot even sync all my stuff back to WM5, let alone install WM6.
I have had a read of these forums, and it seems that to do an installation through a SD card, you need to do some of the steps through sync first, so unless i can work out how to sync it, i think i am screwed. Can anyone help?
Thanks
I bought an att tilt with windows 6.5 and pc.ultimate v18 rom 2/15/09.
My phone will only partially connect to my laptop. i.e. activesync shows connected but will not sync. Also, Device manager only shows a generic mobile device not "att tilt" or "kaiser" I would like to get my contacts, calendar and tasks on my phone. Any suggestions?
Firgo said:
I bought an att tilt with windows 6.5 and pc.ultimate v18 rom 2/15/09.
My phone will only partially connect to my laptop. i.e. activesync shows connected but will not sync. Also, Device manager only shows a generic mobile device not "att tilt" or "kaiser" I would like to get my contacts, calendar and tasks on my phone. Any suggestions?
Click to expand...
Click to collapse
I dont have a tilt.. but you might want to try flashing a more stable rom on to it? It sounds like it might be a rom issue. If not i suggest re-installing active sync and go to active sync on your phone and delete any profiles that it has on there.
Help Att tilt
Thanks for responding...
How do I flash a new rom to it? My computer doesn't appear to recognize it. I get the following error message when I connect, "critical communication serviceshave failed to start. Try resetting mobile device and then connect again." I have done soft resets and hard resets with no luck. I am wondering if I am missing a speciific driver for the phone that will resolve this.
Firgo
try a different computer. cid unlock your phone then hard spl then flash.
Well spose the best thing is to get you to the right part of XDA.
Kaiser ROM Development http://forum.xda-developers.com/forumdisplay.php?f=378
Try this first with Total Commander go to Windows and find USBtoPC.exe launch it and untick advanced network
Also may be worth uinstalling active sync/WMDC and reinstalling restarting computer.
You must be hard-spl'd so can get the phone into bootloader and try and flash another ROM.
Good luck.
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
adriciu said:
Hi everybody
I have an HTC Fuze (ATT). The ROM I used was NATF v5. series. I tried a couple of days ago to sync it with my computer but it gave me an "USB device not recognized" message. I did a hard reset but it didn't change anything. I changed the "Energy" rom, but I had the same problem. I tried now to sync the phone with another laptop but I have the same message, so something happened with the phone. What I noticed was the fact that actually when I hard reseted, I still had the NATF 5.series screen shot, even if the rom was the energy one. I appreciate each answer as I don't know what I can do more.
Adriciu
Click to expand...
Click to collapse
Had you try other cables Sir?
NATF splash screen will remain there, because when you flash Energy ROM, it didn't contain splash screen, so it wouldn't be replaced.
I tried a different cable, as well as a different computer. On the new computer there was no previous activesync installed. This led me to belive that there is a problem in the registry somewhere, but I don't know what to change. I also installed the Activesync 4.5 several times. on the ald and new computer, but nothing helps. No firewall active.
Adriciu
<- same problem
Anybody has any ideas?
What about using other phones, if it's okay then the problem was on Your phone, vice versa.
In my opinion, to get phone connected, we must have Activesync (for Win XP) or WMDC (for Vista) installed, good cable (original preferred) and good phone condition (H/W or S/W)
Hope You solve it soon Sir.
I have reinstalled the ATT rom, but is still gives me a "USB device not recognized" message. So I think something is wrong with my phone. Is there any way where I can clean up the whole registry and start from a clean fresh phone?
Still not working.
I had a simmilar problem a long time back.... How I fixed it was I deleted that connection setting for that phone in activesync... Then rebooted...Try to connect it then... If it still doesn;t work, UNINSTALL activesync... reboot... reboot again for good measure.. then reinstall it... reboot... Then try to connect again.... a lot of steps, but it worked for me when I put a diffrent on an old phone I had...
OK, some updates. I tried syncing with another laptop and it is not working. I tried doing the same thing with an Apple comp and it doesn't even see it as an usb device. However I tried syncing wifi with my gmail account and it is giving me the following error message: "The configuration on your Exchange server prevents you from synchronizing. Support code: 0x85010004". So I think there is a setting I don't know how to change.
I have an HTC HD with stock rom
I recently had to change my sd card for a new one.
I hard reseted to reinstall all my programs.
Bluetooth sync is ok but NO MORE SYNC BY USB NOW !
So I cannot install net CF 3.5 or sync music or GPS maps (files take too much time 'cause too big) ...
I have hard reseted my device, uninstalled and reinstalled WM device center latest version, unchecked "activate advanced network" in "usb to pc settings", deconnected my firewall and anti virus; tried active tweak freeware; changed cable ... NOTHING WORKS. No connection, no sound, no error message...
Please help !!!
If put your HD into bootloader, and you connect it to the pc, does the text 'serial' change into 'USB'?
If so, there's nothing wrong with the drivers so we need to look further.
If not, your drivers do not work.
Let me know if the text changed or not, then I'll see if I've got some solutions for you.
Hi Condor.
I don't see any change when I do as you told me. Serial doesn't change into USB.
Thanks for your help.
Finally had to bring my phone for repair. The motherboard has been changed. Now everything's OK.