Database Info

Jamin WWE No Vendor ID

Hi there,
Since I installed the latest dopod 818 Pro WWE ROM on my Qtek S200, I have some trouble with the device now and then. It unexpectedly reboots while having conversations after which it can't find my service provider. Then when I disable and re-enable the phone in communications manager it finds the network again. Sometimes calls are not coming through either. I did not have any of these problems with the old Qtek S200 NL ROM.
I also tried different radio roms. 2.19.21, 2.20.21, 2.30.21, no luck.
I like to try the Jamin ROM. Is there anyone who know where I can find a NoVendorID version of the latest Jamin WWE ROM? I tried the regular one in combination with the ROMupdateUtility.exe of the Dopod NoVendorID ROM, but this gives an error at 80% while flashing. After that I was only able to enter the bootloader mode of my S200. So I flashed it once again with the Dopod 818 Pro ROM.
Thanks!
Kind regards,
Dennis

Yeh, I would like to have the No Vendor ID JAMin WWE Rom, too. Could some one please make that? I still do not like the dopod ROM for some reasons. JAMin ROM is still my best choice.

I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!

cidriver said:
I didn't see the rom you mentioned, but if you CID unlosck your device first, you can go to: ftp://ftp.clubimate.com/ and choose the rom you like, I mean, the language you wish. Go for it and luck!
The tools for CID unlock your device is, on XDA-Wiki, just up!
Click to expand...
Click to collapse
I have a G4 prophet. Again, it is impossible to CID unlock a G4 prophet!!!!!!!!!!!!!!!!!!
Why people keep telling me to CID unlock my device? Of course we all know CID unlock first. If we could CID unlock our device, why should we ask for No Vendor ID upgrade?

no-vendor ID
Yes, I'm still looking for a No-Vendor ID Jamin ROM WWE, that would work on my S200... Anyone?
Thanks

help upgrading to WM6... plz

I am trying to upgrade my Wizard to WM6...
I have followed the instructions on this page... When I flash a full-feature WM6 ROM (tried BlackDiamond 3.1, TNT.19199 and XDA Mobile 6 RC5) it reaches to 99% and then hangs for a while then I get the error recovery dialog.
I have also tried the slim versions (WM6.1 slim edition, and XDA Mobile 6 lite), when I flash those, everything goes well and flashing completes, however when the installation finishes I get the same WM5 interface, I check the about dialog in the Wizard settings and pingo it says "Windows Mobile 5"...
What could be the problem???
My current IPL/SPL is 2.16

Bad cid unlock!!!

Unlock
Unlock your fone right from the start read the guide depends if u have g3 or g4 device you may need to down grade radio rom. the unlock guide and faria guide gives you all the detail.

Quiyaro said:
Bad cid unlock!!!
Click to expand...
Click to collapse
Yep... that was the problem...
I unlocked it again... flased the ROMs and it worked...
Thanks alot...

tornado in bootloader and is death !!

h to everybody, i 've tried to flash my C600 whith platinum edition and when i'll arrive to a finish at 100% in blue colors the device it was in orange colort start after that it is blocked in bootloader mode
tornado
ipl 2.00
tornado
SPL.2.00.0014
TORNADO iu
and now i can't understand what can i do?
any ideas for me please??

paletta7 said:
h to everybody, i 've tried to flash my C600 whith platinum edition and when i'll arrive to a finish at 100% in blue colors the device it was in orange colort start after that it is blocked in bootloader mode
tornado
ipl 2.00
tornado
SPL.2.00.0014
TORNADO iu
and now i can't understand what can i do?
any ideas for me please??
Click to expand...
Click to collapse
please somone tell me how i can solve....

Flash back to WM5 and follow my guide STEP by STEP

thanks but the bootloaed it's still there!!!!

Flash back to WM5, using your original manufacturer ROM

where do you get the original mfr ROM?

From your manufacturer website

here in italy we don'te have a orange . but my c600 it's completly blocked,
it's a firt time i've this problem
and now i'm very strange situation----

Did you found a solution to your issue? Because I have the exact same problem...
Thanks!

Prblem during update to new ROM of Vodafone

Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor

chicksor said:
Hi everyone,
my PDA (VPA Compact 2) is shutting down during every updateprocess (at 80%).
I try it a few time, but everytime the same problem.
WM5 ist not starting.
Everything I can see is the bootloader.
IPL 1.05
SPL 2.21
Can somebody help me?
What can I do?
Best regards
chicksor
Click to expand...
Click to collapse
Custom build rom will not flash as your phone has IPL 1.xx,it must have IPL 2.xx and it shud be CID unlocked.Wm5 will not boot up as the original Bootloaders have changed,when you flashed Buttons rom to downgrade.
Now reflash Button's Rom 1.05 again in bootloaders and use lokiwiz02b to SIM/CID unlock the phone,after SIM/CID unlocking,upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26,only after that it'll upgrade to any wm6 or 6.1 rom.But if you want to flash official vodaphone rom,download the official rom and flash it in Bootloaders.
Cheers !

Trying to upgrade to win 6.1 but somehow fails..

Hi,
Im using a Qtek S200 G4 and Im a newbie.
Ive tryed to install Windows mobile 6.1 and the ROM patching seems to be successfull but when the phone reboots I cant get through the BOOT screen (three colors). I believe I´ve follow guides correctly. Now I have reinstalled the defualt rom for this phone again and it works fine.
I´ve also patched the phone with HardSPL G4.
The ROMs ive tryed ton install:
wm61_korand_3_1
RomProphetManila2D Diamond
Any suggestions?

Does no one have a solution for me?

Anyone please help me

sta1n said:
Anyone please help me
Click to expand...
Click to collapse
if you have already hardspl your device can you post what comes up in first boot screen Mine is like this
Code:
IPL 2.10.0001
SPL 2,G4.4PDA
GSM 02.19.21
With my phone you can see that the hardspl was successful because it displays
SPL 2.G4.4PDA