h to everybody, i 've tried to flash my C600 whith platinum edition and when i'll arrive to a finish at 100% in blue colors the device it was in orange colort start after that it is blocked in bootloader mode
tornado
ipl 2.00
tornado
SPL.2.00.0014
TORNADO iu
and now i can't understand what can i do?
any ideas for me please??
paletta7 said:
h to everybody, i 've tried to flash my C600 whith platinum edition and when i'll arrive to a finish at 100% in blue colors the device it was in orange colort start after that it is blocked in bootloader mode
tornado
ipl 2.00
tornado
SPL.2.00.0014
TORNADO iu
and now i can't understand what can i do?
any ideas for me please??
Click to expand...
Click to collapse
please somone tell me how i can solve....
Flash back to WM5 and follow my guide STEP by STEP
thanks but the bootloaed it's still there!!!!
Flash back to WM5, using your original manufacturer ROM
where do you get the original mfr ROM?
From your manufacturer website
here in italy we don'te have a orange . but my c600 it's completly blocked,
it's a firt time i've this problem
and now i'm very strange situation----
Did you found a solution to your issue? Because I have the exact same problem...
Thanks!
Related
Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?
yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked
Thanks, hopefully my M600 is in the post at the moment
Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen
Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.
Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it
I have Imate Jamin (Prophet) Its keep restarting It have (APL 1.00 SPL 2.13)
how to solve this problem.
I have flashed versions 1.xx and 2.xx Imate roms using JAMWM.
but problem is still same.
looking for solution.
Br.
DrMobile
73 views.. no reply why??
DrMobile said:
73 views.. no reply why??
Click to expand...
Click to collapse
I don't know, at least you got one reply...
ImateJamin Hang On Screan
I have Imate too but it is hang on boot screan ,when I turn on .The result affter upgade to WM6
any one have solusion ???
DrMobile said:
I have Imate Jamin (Prophet) Its keep restarting It have (APL 1.00 SPL 2.13)
how to solve this problem.
I have flashed versions 1.xx and 2.xx Imate roms using JAMWM.
but problem is still same.
looking for solution.
Br.
DrMobile
Click to expand...
Click to collapse
flash it using normal RUU flash file, don't use JAFWM.
MANH Fone said:
I have Imate too but it is hang on boot screan ,when I turn on .The result affter upgade to WM6
any one have solusion ???
Click to expand...
Click to collapse
Have you try Hard reset? Have you read wiki? Have you try reflash old Provider ROM and Flash WM6 again?
Hi guys,
im sorry thar I have to ask. In the last 3 days, I´ve read a lot, but I can't find any hints for my Problem.
Fact is: I updated ma IPL/SPL from 2.09 / 2.09.0000 to 2.20 / 2.20.0000.
So if I want to flash my ROM - for example with this, after rebooting the prophet it stucks in the red/green/blue screen, showing IPL 2.20 and SPL 2.20.0000. In the lower left corner is 'USB' shown, when USB plugged in.
I tried to flash back den WM5 - it works, so that I can use my Prophet again with WM5. BUT I WANT WM 6.1 .
Can please anyone give me some hints, or tell me what I`ve made wrong.
I have no further Idea.
Thank you all for your answers.
animal_cam
GOT IT.
I simply did the HardSPL (including the SoftSPL) once again. An what should I say: Miracles happen . After this in the bootscreen was displayed: IPL 2.20 / SPL 2.G3.4PDA. And now it´s possible to flash each ROM - great
Best regards
animal_cam
Hi,
Im using a Qtek S200 G4 and Im a newbie.
Ive tryed to install Windows mobile 6.1 and the ROM patching seems to be successfull but when the phone reboots I cant get through the BOOT screen (three colors). I believe I´ve follow guides correctly. Now I have reinstalled the defualt rom for this phone again and it works fine.
I´ve also patched the phone with HardSPL G4.
The ROMs ive tryed ton install:
wm61_korand_3_1
RomProphetManila2D Diamond
Any suggestions?
Does no one have a solution for me?
Anyone please help me
sta1n said:
Anyone please help me
Click to expand...
Click to collapse
if you have already hardspl your device can you post what comes up in first boot screen Mine is like this
Code:
IPL 2.10.0001
SPL 2,G4.4PDA
GSM 02.19.21
With my phone you can see that the hardspl was successful because it displays
SPL 2.G4.4PDA
Hi, I’m flashing newbie. I need to get my ipl / spl version to know what is my hardware versions (G3 or G4) and unlock the CID. The goal is to change my radio rom.
I’ve found 2 methods to get it and no one work for me.
I have a red splash screen and I can’t see anything on my phone boot. (It’s a SFR VodafonePhone)
I’ve try the tool WizardServiceTool v4.2.2 but it not work (script problem…)
I Have Raphael device (diamond Touch Pro) RATH100, my SIM is unlock (I have call SFR, it’s free).
I’ve change my rom for the last Energy rom (Really good job!) but WizardServiceTool v4.2.2 not work too.
Any Help will be really appreciated.
BOB
My Red splash screen hide my IPL / SPL.
Someone know if I can change my splash screen without unlock my CID ?
Please UP…
bob37 said:
My Red splash screen hide my IPL / SPL.
Someone know if I can change my splash screen without unlock my CID ?
Please UP…
Click to expand...
Click to collapse
Yes, follow this tutorial and you should be fine.
Thanks for you're response Bruce.
I will try it.
Bob
Thanks again Bruce, my splash screen is changed.
But I don’t see my IPL/SPL number just the RGD tab :
R 1.02.25.19
G 52.33.25.17H
D 5nergy ROM
I understood that the IPL / SPL numbers are displayed during the boot but maybe I'm wrong.
Someone can help me?
BOB
bob37 said:
Thanks again Bruce, my splash screen is changed.
But I don’t see my IPL/SPL number just the RGD tab :
R 1.02.25.19
G 52.33.25.17H
D 5nergy ROM
I understood that the IPL / SPL numbers are displayed during the boot but maybe I'm wrong.
Someone can help me?
BOB
Click to expand...
Click to collapse
You have to go into bootlaoder mode to see the IPL/SPL, what displays during bootup is the Radio\ROM version.
To go into bootloader mode, you hit soft reset while holding Down Volume. A tricolored screen will appear and this should display 1.90 OLINEX.
Yes I’ve 1.90 OLINEX.
So, I just want be sure, it would like to say it’s G3 wizard and I need follow the G3 guide (http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies) to unlock my CID and update my radio ROM (my SIM I early unlocked)?
Bob
bob37 said:
Yes I’ve 1.90 OLINEX.
So, I just want be sure, it would like to say it’s G3 wizard and I need follow the G3 guide (http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies) to unlock my CID and update my radio ROM (my SIM I early unlocked)?
Bob
Click to expand...
Click to collapse
Yes, I believe that's a great place to start.