Related
I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
Hi mates. i was using tnt series wm6 rom. and i just tried to upgrade to faria's rom using shell tool. and after non successful upgrading now. when i start my wizard it stuck on boot screen. with this info.
ipl : 3.08
spl: 3.08
Gsm : 2.19.11
OS : 2.18.0.0
i tried a alot installing original t-mobile shipped rom but it says the update utility is not for your device.
i tried a lot installing other roms using shell tool. but all return this screen. so please let me know. how i will completly flash this thing..
Kind Regards
Tell us smth more
Are you using Windows Vista on your PC.
If you do, do some search around to find how to update from Vista in Bootloader Mode, as Vista can not talk to the phone on that state
Aldo
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
ruk_design said:
thanks bro., i am using wondows xp. and i tried all shipped original t-mobile roms. and all i got this message" the update utility is not for your device" i think this error is due to i upgraded my ipl and spl to 3.08. before i have 2.26
i also tested with wizard service tool. and its also not detecting the device in boot loader mode.
so please let me know. what i will do. and which rom i will try to fix that issue.
Click to expand...
Click to collapse
My friend have you already done the reviving techniques included in this tut?:
http://forum.xda-developers.com/showthread.php?t=298613
G3 or G4 device?
Hello everybody!
I made up a new version of pof's USPL, which is explicitly for the ELFIN 128/256 MB devices. So now you can flash SPL in step three without bricking your ELFIN, as USPL for ELF used to do.
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Download here:
http://rapidshare.com/files/94753943/ELFIN_USPL.rar
It has been tested by various users including myself and was verified to work without any problems.
Even though, I take no responsibility for any damages on your devices.
Thanks to pof for his great work!
If it doesn't work for you right away, follow the instructions in this file to enable RAPI prior to using USPL:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
EDIT:
SOME PEOPLE GIVE THE INSTRUCTION ON MY ELFIN USPL TO CANCEL STEP THREE. WHAT THE HELL ARE YOU THINKING WHAT THIS STEP IS? WITHOUT THIS STEP, THERE IS NO (!!!!!) SENSE IN ELFIN USPL.
So please stop giving tutorials on things you don't understand.
STEP 3 IS THE MOST IMPORTANT STEP! RUN IT, DON'T CANCEL.
good news for elfin users! well i will use this version when i got a chance lol thanks for your great job tho~
btw got you a mirror link: http://www.fs2you.com/files/0bbd31fa-e3ad-11dc-91b6-0014221b798a
cheers!
Great!Thank u very much!
is this working for
IPL 2.24.0002
SPL 2.24.0000????
eastwoodz said:
is this working for
IPL 2.24.0002
SPL 2.24.0000????
Click to expand...
Click to collapse
i have the same question.
I received a "corrupt image error" at step 3, i rebooted the device and is working fine like nothing has happened, any clues?
I have this ROM installed:
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
IPL 2.20.0002 and SPL 2.20.0000 both remain unchanged after running elfin-uspl.exe
what is difference from pof's USPL?
as i used it to update my ELFIN without any problem
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Nice, very nice tool ... no more brick then
Thanks for the work
Can someone please clarify this for me.
I bought my cellphone from Vietnam, and it is unlocked. It is windows 6 prof, and I am very serious about flashing my baby to 6.1. When I was in Vietnam, I was using VietTel, t-Mobile, and in Mexico using Telcel.
BUT I bricked my iMate Sp3i before, and didn't want(CAN'T afford) to brick another one.
The question would be.
Because it is unlocked. Do I need to CID Unlock my Elfin P3452 before upgrading to 6.1? Thanks in advance.
djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
somemore questions..
after runnig 2 steps successfully in pof's app, if rom update fails then i think it does not brick all the time.. atleast not 99% !!
is SPL temporary updated means after some update again CID is locked?
or it is permanent?
Excelent work djvw !! many thanks, I can confirm that works fine, three users in our spanish forum flashed this USPL and it works in all cases... no more white screen to flash roms.....
my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful
ababrekar said:
my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful
Click to expand...
Click to collapse
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.
djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
ok, i will try this.
ciberus said:
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.
Click to expand...
Click to collapse
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?
ababrekar said:
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?
Click to expand...
Click to collapse
ok.. so it is done on my elfin... so i think.. didnt show me any errors... the ruu worked like a chram too and at last it showed me "Congratulations" but my question is how do i confirm if the cid is really unlocked... i dont wanna flash a good rom and get my touch bricked
Edit: it worked finally and i think my elfin should now be unlocked
Please, tell me the instructions.
I don´t Understand
Thank You
I have flash my ROM today with success !!!
From 2.26.111.53GER to 2.81.111.1GER without Extended ROM (T-Mobile Applications)
SIM Unlock worked too..
After a hard reset I have 137/81MB free memory...
T-Mobile Elfin - MDA Touch XL 128/256 MB
Thank you pof and djvw!!!
djvw said:
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Click to expand...
Click to collapse
Does this one work on ELF ? Anyone tried already?
I have an ELF touch with 2.20.0000 SPL, should I use this ELFIN version or use the 1.11 ?
Okay I want windows mobile 6. Whatever reliable working version I can get. I need to apparently unlock the CID and Sim unlock the phone? Carrier is T-mobile. I'm not new to registries, etc. I created my own Iphone theme with all the great perks (just for fun) even so I'm not new to hacking a phones appearance, but everything else like flashing, etc. I'm new to. I'm good at figuring things out though.
But I reviewed multiple threads and just don't get it, which one do I use?
So if anyone can help me out, please do. I have all the roms for the new 6.5 and all that but the only thing is NONE are english or say what version itll change to, etc. Any help is appreciated.
===========================
I have:
G3
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
Windows Mobile Version 5.0
Windows OS 5.1.70 (Build 14410.1.1.3)
Processor: OMAP850-195MHz
==============================
UPDATE:
I UNLOCKED CID AND SIM UNLOCKED PHONE
NOW I NEED A GOOD VERSION OF WINDOWS MOBILE I GUESS
If you have followed this guide & you have managed to flash T-Mobile 2.26 rom (step G3.7) you can flash every rom that you can found here with safety. As you will see it is recommended to fully charge your phone first & use Windows XP for flashing & not Vista. Good luck.-
I tried the 2.26 rom to flash it from 1.08... All it does is switches to the green red whtie or blue screen and then wont flash or install the rom...
Scath said:
I tried the 2.26 rom to flash it from 1.08... All it does is switches to the green red whtie or blue screen and then wont flash or install the rom...
Click to expand...
Click to collapse
Intresting...
What guide have you followed to CID & SIM unlock your phone?
Did you flash Button Rom?
After flashing Βutton Rom if I remember right you must have IPL/SPL 1.05
Then you can flash 2.26
This is what I have done.-
I'm running vista if that's the problem.. But I tried flash button rom and that just gives me an end process error. I dont have 1.06 but 1.08
Let me try the link you sent me it is different.
ERROR 204. Constantly
Scath said:
I'm running vista if that's the problem.. But I tried flash button rom and that just gives me an end process error. I dont have 1.06 but 1.08
Let me try the link you sent me it is different
Click to expand...
Click to collapse
You can take a look here too.
Read the procedure
I think that maybe you have not yet CID/SIM unlocked your phone.
Be carefull. If you are not CID/SIM unlocked & you are trying to flash a rom different from the one that came with the phone, you can brick your device.
Read very carefully the guides & follow them step by step.-
Scath said:
ERROR 204. Constantly
Click to expand...
Click to collapse
Sorry can't help further. Maybe it's something that has to do with Vista
Try some of these suggestions for Vista
http://forum.xda-developers.com/showthread.php?t=291723
It's hit and miss with Vista. I have Vista 64 and cannot get it to work so I have 1 computer in the house that has XP just for flashing my 8125.
Hello Friends ....
I need ur help, I've HTC Wizard 3g and i had good readings over tutorials are given in the forum like Definitive guide and others.
I Succesfully have upgraded Radio to 2.69.11 and IPL/SPL 3.08 but when i flash ROm wm6.1 or Wm6.5 it completes process but when phone starts it gives the same wm5 what am i missing? can anybody tell ? I flash using RUU utility i tried Default [HTC Wizard][ROM][WM6.1][WWE/PLK] H3r5 - final version! it completed than i tried MSD-Wizard-WM6.5-23085 but everytime it starts with Wm5 ? what's wrong with it ?
IPL- 3.08
SPL- 3.08
GSM- 02.69.11
OS- 2.26.10.2
Would be waiting for ur immediate and kind response thank you .
luckylips said:
Hello Friends ....
I need ur help, I've HTC Wizard 3g and i had good readings over tutorials are given in the forum like Definitive guide and others.
I Succesfully have upgraded Radio to 2.69.11 and IPL/SPL 3.08 but when i flash ROm wm6.1 or Wm6.5 it completes process but when phone starts it gives the same wm5 what am i missing? can anybody tell ? I flash using RUU utility i tried Default [HTC Wizard][ROM][WM6.1][WWE/PLK] H3r5 - final version! it completed than i tried MSD-Wizard-WM6.5-23085 but everytime it starts with Wm5 ? what's wrong with it ?
IPL- 3.08
SPL- 3.08
GSM- 02.69.11
OS- 2.26.10.2
Would be waiting for ur immediate and kind response thank you .
Click to expand...
Click to collapse
to able flash with any rom on your device, you better look and follow this Totorial >>> http://forum.xda-developers.com/showpost.php?p=1177659&postcount=1
Hakim Rahman said:
to able flash with any rom on your device, you better look and follow this Totorial >>> http://forum.xda-developers.com/showpost.php?p=1177659&postcount=1
Click to expand...
Click to collapse
i've gone through that post but couldn't get clear idea....let me know that what am i missing ? i've read in many tutorial that if you've IPL- 3.08
SPL- 3.08 Radio- 02.69.11 , then you're ready to flash any rom 6.xx but what's wrong with my device ?
I think your wizard is CID Locked, well im not pretty sure.. you have tried to unlock it?
reix2x said:
I think your wizard is CID Locked, well im not pretty sure.. you have tried to unlock it?
Click to expand...
Click to collapse
Yeah you're right i've done it ...im enjoy new roms .... it was CID lock problem finally i got rid of it thank you for ur help.....
NOTE: If you tried to flash a G3 rom with IPL/SPL in the rom on a G4 you probably will have a bricked device! DON'T flash the new 3.08 and 3.09 IPL/SPL to your G4!
m?
luckylips said:
Hello Friends ....
I need ur help, I've HTC Wizard 3g and i had good readings over tutorials are given in the forum like Definitive guide and others.
I Succesfully have upgraded Radio to 2.69.11 and IPL/SPL 3.08 but when i flash ROm wm6.1 or Wm6.5 it completes process but when phone starts it gives the same wm5 what am i missing? can anybody tell ? I flash using RUU utility i tried Default [HTC Wizard][ROM][WM6.1][WWE/PLK] H3r5 - final version! it completed than i tried MSD-Wizard-WM6.5-23085 but everytime it starts with Wm5 ? what's wrong with it ?
IPL- 3.08
SPL- 3.08
GSM- 02.69.11
OS- 2.26.10.2
Would be waiting for ur immediate and kind response thank you .
Click to expand...
Click to collapse
I like H3r7-beta. He never posted a final version of it, but it works nicely. In spite of having newer phones, I still use my Wizard with H3r7 most consistently because it is the most reliable, and with H3r7 it is also my fastest phone.
n2rjt said:
I like H3r7-beta. He never posted a final version of it, but it works nicely. In spite of having newer phones, I still use my Wizard with H3r7 most consistently because it is the most reliable, and with H3r7 it is also my fastest phone.
Click to expand...
Click to collapse
But i think ANgle Final is ever best....i keep changing rooms after using for a few days till yet i found Angle Roms are the best very fast very lite and very stable..
Yes, Angel-Final is good, too! We have had several very excellent Wizard ROMs over the years.