Hi all !!
As you can see from the topic a wonderfull psone emulator is avaible for windows mobile, I haven't tested it yet because I haven't had much time but I have headr that it works great with our 1 ghz processor ! so let's try it out !
here the link : http://www.fpsece.net/
tested out this little beauty and works great!
I get a steady 60 fps in all games and has run everything i have threw at it!
all we need now is accelerometer support : /
also i cant get the hardware buttons working properly when i assign them a function : (
Yes i can confirm it s working great on s200,fullspeed or even a little better then on psx,and full audio in almost every game.The only problem is that you have to use a ps3 controller because of the resistive touchscreen that let you press only one button at time.I use zeemote controller with the gamepro driver to play but it s not a good controller,i think with dual shock 3 it s like to have a psx
work perfectly even with the accelerometre (for this you have to use the donate version of fpsece and have the HD2 sensor dll installed). The only game that i encounter problemes is with valkyrie profil. The Best playstation emulator on mobile (much better than the one on iphone or android).
salemxp said:
work perfectly even with the accelerometre (for this you have to use the donate version of fpsece and have the HD2 sensor dll installed).
Click to expand...
Click to collapse
Can you pls explain how you configured the gsensor?
I'm using the FpseCE-Supporter-Version, Arto's Sense 3.6-ROM with included HD2-Sensor-DLLs. Other accelerometer-games like HTC-Teeter are working fine, but with FpseCE I didn´t manage to get the gsensor working...
Would be very great if you could help! thx
freakyfreddy said:
Can you pls explain how you configured the gsensor?
I'm using the FpseCE-Supporter-Version, Arto's Sense 3.6-ROM with included HD2-Sensor-DLLs. Other accelerometer-games like HTC-Teeter are working fine, but with FpseCE I didn´t manage to get the gsensor working...
Would be very great if you could help! thx
Click to expand...
Click to collapse
first of all there's many video that you can see for enabled the gsensor on fpsece (here is a link http://www.youtube.com/watch?v=nOcvM8bHiZM). You also need a cab, that i found with the ocam rom's (thanks to him) witch is in russian, for calibrate your g sensor. Put your S200 flat on table, enable z_checkgsensor, and you have to tape on the grey box where you can see a 0. then it's done go too fpsece and enjoy. (Tomb raider or soul reaver with the g sensor is very funny, new game play i like it).
The cab is in attachment .
Hey salemxp,
big thanks for your help. I installed "Alternative SensorSDK by Amper.cab" and now gsensor works fine. Much more fun now to play ps-games
could you please posta little guide on make fpsece work on neotouch ? I did try one time but with no result....also I have some old original ps1 games but I don't remember how to get the image on the pc...
to get the iso's you can download some freeware called 'iso recorder' all instructions on how to use this should be on their website, or you can download them from http://romhustler.net/roms/psx and to the best of my knowledge because it is such an old system it is not illegal to download most games (any still copyrighted are not available on the site) : )
I'm trying to configure fpsece by now....how I have to set this : ArmCoreV5= ???
For everyone having problems running this emulator donload this package i ve made ,from megaupload,containing the emulator,the manual the bios folder with every bios for psx and fpse.ini preconfigured to load 7502 bios file.
http://www.megaupload.com/?d=5R8Y4SE5
instructions:
1 run anf install fpsece cab on your device
2 copy bios folder in the fpsece installation directory overwriting the one inside
3 copy the fpse.ini file in the fpsece installation directory overwriting the one inside
4 now you have only to ad your rom you can download the ones you own from internet,it s faster then make an iso.You can get many other helps reading instruction in the rar package
Fpsece is not mine (is made by a genius),and i think the bios files are legal since psx is abandonware,i only edited fpse.ini.My intention is only to make the installation process easy,so if someone doesn t like i post those files let me know
Yesterday i learned i can use even shooting games...Point blank series is awesome payed with resistive touchscreen of s200(better then on capacitive hd2,because resistive it s more precise).It s simply the best game i ve tried in a phone
Thank Axel85. I packed everything in one cab file. Just install it - no need to overwrite anything.
brainmaster you re the best... thank you.I download it even for me
gonna try it
Brain master, have u got it in .apk format for my x10?
Related
Dear Tobias and friends,
I would like to install Real VGA and the other 2 DPI cab files into my Italian htc x7510 WM 6.1 pro but, beig really a newbye,...WHERE have I to put these files ? In wich Folders ?
2nd Question...Is there any risk ? It seems someone in the forum had problems due to the WM 6.1... Is there someone who tried successfully Real VGA on an Italian version ? With wich precautions ?
Thank you for an answer
I've used RealVGA on my x7510 since I got it w/o any problems at all. Works great and it makes the huge display really worthwhile.
When you install it be sure to install to main memory, not the flash drive or a storage card -- that's true for the RealVGA program and both dpi programs. Then reboot your x7510, open RealVGA, select whichever dpi you want and it will reboot again -- should then work fine.
Hello,
I try to use the sw but I have problems with the excel program, dont run if the realVga is intalled in my HTC 7510 spanish.
when I made the installation I have a message that said: Missind 128 DPI resources
ipsecvpnres.dll is not found.
Can you help me?
thanks a lot
pskmrc said:
Hello,
I try to use the sw but I have problems with the excel program, dont run if the realVga is intalled in my HTC 7510 spanish.
when I made the installation I have a message that said: Missind 128 DPI resources
ipsecvpnres.dll is not found.
Can you help me?
thanks a lot
Click to expand...
Click to collapse
I had a similar problem (not ony with excel but with any program with a box to edit a number).
I think that the problem is with the SIP keyboard that does not work on 96/128 dpi. Install another SIP keyboard (like resco keyboard) and all should work fine again.
Or you could just drop the three files in the attached RAR into your Windows folder...
missing msimit
Thank you all
I installed Real VGA and also the file you suggested but there are still problems:
1) first of all there is a message that msimit.128.dll and msimit.96.dll are missing. Where can i find them ?
2) some programs do not run properly: e.g. in Agenda Fusion 8.60 contacts, the icons commads at the bottom are not displayed.
3) If it will become necessary, how can I go back to the original display ?
you must copy the msim.128.dll and msim.96.dll to another folder, rename it to msimit.128.dll and msimit.96.dll, and copy back to windows-folder
if you want your original display with 192dpi, start real vga and set it to 192dpi, restart, ready. some progs are not working with that, eg s2u2 will not go back to 192dpi
Dear All,
I solved the problem with missing msimit : it was enough a files' rename.
Still open instead the problem with Agenda Fusion 8.6 (Developer One). At 192 dpi works properly but, at 96 and 128 dpi, even working well, the icon buttons at the bottom pages disappear, so that commands are not available.
Anyone knows a way to solve it ?
I cant seem to get this thing to work. I run WM 6.1 on an HTC Mogul. I have scph1001.bin in the bios folder and the program loads like it should and I can select options, config the contols and memory cards and such. I have Final Fantasy 7 discs 1, 2, and 3 as .bin with a .cue and the program recognizes them when I go to load and iso but when I select disc 1 the on screen controller comes up but the game doesnt load. I even let it sit there for a minute and FpseCE just closes. what am I doing wrong? Those same files work just fine on my Desktop PC using ePSXe emulator. please help!
emulators are rarely 100% compatible with all games if I were you I would check out their website for compatible games list or maybe in their forum
ok... so it actually worked... once. I was checking to make sure the bios was loaded and for some reason when I chose the bios it took me back to the main menu unlike everytime before and since it just shuts the program off. the one time it actually stayed on after choosing the bios is the one time I got FF7 to play and it played wonderfully. anyone know whats going on with it now?
i own a cect miphone m88....
i need to find a barcode reader: i-nigma, and quickmark don't work on it.....
*this is a windows mobile 6.0 phone*
other problems :
1 - when i use some other keyboard, when i set it to that keyboard, it changes it self back to the defauly keyboard, or doesn't even go to it, as if it doesn't exist.....
2 - i also need to get an iphone pages type of thing for wm6.... (the one i use only has 1 page.....) i tried ifonz, but that was really bad quality, and ifonz2.....i don't even want to get started with all the errors....
Other things i need help with:
now i also need a hardware accelerator driver....where can i get the openGL driver??? (throttlelauncher)
...
and if there are any better ways to get android on my miphone....please , just say....
2 more things
i also need to change the taskbar size to maximize the workspace....so can anyone help with that?
Welcome to forums
Have a read in some of this links
Copies are never good...
I have installed PSX4Droid 1.7 , 2.0 , and 3.0 (the new free one) ... and none of them will work... When I use 1.7 and 2.0 and try to load Harvest moon they don't do anything, and when I use 3.0 it loads and then crashes and says "PSX 4 driud gas crashed... please click here to help fix the issue"
I have the scph1001.bin for the BIOS but I just dont know whats wrong, I have only tried it with Harvest Moon which is a eboot (eboot.pbp and keys.bin files) I have not tried any other games as I am in the process of putting them on the tablet now.
Has anyone had these issues or is it specific to this game?
I could never get it to work. I use fpse instead which works great.
I just tried Crash Bandicoot and it is also not working
What version of FPSE are you using? I am trying with FPSE , and when I load the keys.bin file it just says "FPSE has exited, try using bios, press menu, system, load bios file, save and retry"
But I have loaded the bios file ... ?
Can't remember although I've had no problems with several versions. Make sure after you load a BIOS you save that as your default configuration in the system menu. Turn off HLE in the system menu too. Also fpse cannot run eboot files. All of my ROMs are either bin or cdi and they work fine.
Thanks, Does anyone else have any tips??
I'm currently copying over FF7 (actual ROM, not eBOOT) to see if that will work...
twistid1 said:
Thanks, Does anyone else have any tips??
I'm currently copying over FF7 (actual ROM, not eBOOT) to see if that will work...
Click to expand...
Click to collapse
One more thing. The G-Tablet's multi-touch can be a little finicky when touching two points on the same plane (same position in respect to the y-axis) so I highly suggest setting the d-pad to the middle left of the screen and keeping the other buttons on the bottom right of the screen.
So this may be a little annoying to some members because there are probably threads out there somewhere however, I am new to this website (friend suggested it) and i am new to android and xperia play.
So i'm a little miffed at the lack of serious ps1 titles on it and i was hoping Sony would release more now that the tablets are out and using the same software but they aren't.
Is there anyone who could explain in clear steps as i am a technical noob and have no idea what i am doing with this phone, how to get ps1 emulators/roms to work well?
I've read about FPse and such but i have no idea how to work it or how to make sure it runs games properly. So i wouldn't wanna pay for it and then not know how to use it.
Any help would be really grateful.
Thanks
FPSE is really simple.
1) Extract the BIOS from your PSX (it's illegal to download them...).
2) Extract the ISOs from the disks of the PSX games you own (it's illegal to download them...).
3) Install FPSE and put the BIOS file and the ISO you want to play inside your SDCard.
4) Run FPSE. It will ask you for the BIOS you've ripped. Go to the folder where you've extracted it using the program's file manager, and click on the BIOS file.
5) Now you can do the same procedure to select the ISO you want to play. You have different options to configure the emulator to your liking.
6) Get an idea of what you're doing to your phone. No one is going to spoon feed you everything.
Hey, thanks for the reply and I appreciate it.
I own the majority of ps1 games that I want to play so I can just
rip those using imageburn right?
I dont expect to get spoon fed anything but as im still relatively
new to my phone I also wouldnt want to install an app or mess
with settings without knowing the right way to go about it.
Again thank you for the steps, will use these when trying it out.
Is it true that multiple disc titles run into problems though when disc switching?
Not on fpse. There is a handy Eject button so you can pop in the new disc as you need it.