my vodafone m802 recently shows a white screen even thought i can see all of my phones contents in active sync 4.5, when i connect my phone with SOTI Pocket Controller Pro and did a hard reset from this program it still has a white screen, i am at my widths end what can i do to resolve this issue, when i view my screen now with SOTI i can see the start up screen in SOTI but its stuck on align screen and atlas i cannot align screen as my VODAFONE M802 has a white screen and i cannot tap it to align screen i am a newbie and this is my first post PLEASE IS THERE ANYONE HERE WHO CAN HELP ME SORT THIS OUT
i guess the people on here arnt as good as they let on they are as no one has bothered to answer my post!!!!!!!!!!!!!!!
the people around here are the best in the world .
its just your phone is a pile of garbage and no one will help you coz its not in hand
ps : i have the same phone now and it really sucks
wbr,
Related
OK, heres the deal..
Yesterday I managed to crack the bottom-left corner of my BA screen (damn medkit shifted onto it in my car glovebox ).
As i was checking to see how much of the screen was still responsive (seemed OK, still usable, only the 'New' button and the bottom item of the menu didnt work) the battery died (as in completely, hard reset died)..
So i plug in the power, and start the familiar initial setup. I get to the callibrate screen screen and am unable to continue..
So my question is: Is there any way to bypass the calibrate screen section of the initial setup? Im pretty sure enough of the screen still works for the device to function, if only i could get past this damned calibration screen..
Clearly i cannot bypass it completely, as the screen does need to be calibrated - but is there any way I can recover my BA?
Cheers All
Check out this thread:
http://forum.xda-developers.com/viewtopic.php?t=1910
or this one:
http://forum.xda-developers.com/viewtopic.php?t=6855
Also, if you can still see the image it means that only the digitizer (touch sensitive part) is broken, and not the screen so it shouldn't cost to much to replace.
And remember - search is your friend! :wink:
This might be a bit toooo late, but just in case some one is stuck with a broken screen as dabs and I were.
I received a k-jam (lucky me, it was for free) with a broken touch screen, it was left uncharged for a long time so after charging it, it entered the unwelcomed welcome mode (you know, align, copy, time zone ...) and there were no way of passing this part of initialization.
I had to do some search over the net, and I found a good article here ((Can I use a PDA that has a broken touch screen)) http://www.pocketpcmag.com/blogs/index.php?m=200510 which advised the use of "RemoteCalibration.exe" directly from the pc. This killed the welcome.exe program and I managed to re-use the K-jam again. The only draw back about this way is that I will have to connect the K-jam to a pc every time I hard reset, I hope there is a way to do the same action via mini sd cards.
After that, I installed fakecursor (but I'm looking for a better sw to emulate the touch screen function as this one cancels most hardware buttons on the devise) but at the moment, I'm using all the k-jam's functions.
Hope this would be of help to some one out there
Can somebody please help me
My PDA vario 2 the touch screen have frozen and i can not use it
None of the bottons are working and at the moment it is lock and strugling to unlock.
Please help i have vital information on it
Thanks
Hi Babes,
I don't know much, but I do know that the sweet people on this forum would very much like to know a lot more details about your device before they will be able to tell you much.
Obviously you must have performed a soft reset.
My PDA Freezes
Hi Everyone,
I have T Mobile MDA Vario II and my problem is the screen touch on which i use my stylus stick to tap on is not working. When i tap anything on the screen non of the functions are working which means i can not use the phone to make call or get any information from it.
I will be happy if anybody can help me to solve it and i have tried things like resetting and trying to calibrate again.
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#softreset
try reading this
Hey dude
I have a HTC TyTN which i *think* is the same device. Basically its rubbish when it sleeps on its own. Don't let it turn its self off. Do it yourself. Kills 99% of all known "comas" (which is what its known as) and only requires a touch of the off button
SOrry, just to add:
have you tried the soft reset underneath by the slider switch where you sink it with usb? Stick a pen or pencil in and hold for a second. If all goes well you won't loose any info and it will restart. Then you can go into system and turn off autosleep.
Hi i recently got this htc p3600 with broken touchscreen, the lcd is fine but the touchscreen have some cracks in it.
I don't know anything about what versions of roms etc is in it. All i know is that windows mobile's in it.
When i start up the phone i get a green windows mobile screen witch says that i should click anywhere on the screen to calibrate the screen. I do htat because i can't do anything else and then this X shows up and i am suopposed to click on it in order to calibrate the screen.
I'm doing this, first in the middle then it moves to each corner but when i clicked all the corners i goes back to the middle nad starts over agaiN!!
I've clinged this stupid X for like 15 minutes now but nothing seems to happen!! Whats the problem? Can it be locked to the sim-card i've inserted??? Please help me!
guess you will have to replace the digitizer.othewise, you may try connect it with active sync and delete the call program from auto run - hopefully theres some default cal data in it.
Don't really understand what you're saying, im new to this phone and i got i broken. ALready ordered a digitizer but i want to test it out now. Tried to add a calibration value to the registry but i cant do anything because its locked.
So i think enableing rapi will o the trick but i cant start the phone to start the enable rapi program :/:/
Is there any other way to bypass this screen? Like killing the process with some taskmanager??
go search for remotecalibration.exe
I have been asked to replace a broken screen on a T-Mobile phone. The only id I can find for the phone is HTC PM200. I think this may make it a HTC Charmer or MDA compact II. I only think this is correct hence the reason for the post in the general forum. (Mods can you move to appropriate). Any way the screen was cracked and I have replaced it with the same model(taken from the rear of the screen). The phone boots up correctly but refuses to recognise any taps on the screen. I have downloaded remote screen alignment but this had no effect. Any body any ideas if I have done something wrong or ways to fix this problem. The screen code is LTP280QV-E01. I have searched the forums hence the reason for downloading "Remote Screen Alignment"
Thanks in advance
I have an att tilt that came stock with wm6.1 pro and i updated it to the new 3.7. something or other ROM from the HTC website and when that was done also bought spb pocket plus. I am having a couple of not so bad but annoying problems
After much trouble, I put the 6 tab version of htc home plugin on the home tab of pocket plus and when the phone is closed and I lock the phone form the htc home programs tab the clock doesn't appear, but it appears like normal when i lock it while the phone is slid open, like i said, nothing big just little bothersom things
And also when the screen is off and black, it will randomly turn on and just have a solid gray screen for usually a few seconds and will shut off again. Is that a sign of something else going wrong?
Any suggestions or help would be appreciated
thanks