Can somebody please help me
My PDA vario 2 the touch screen have frozen and i can not use it
None of the bottons are working and at the moment it is lock and strugling to unlock.
Please help i have vital information on it
Thanks
Hi Babes,
I don't know much, but I do know that the sweet people on this forum would very much like to know a lot more details about your device before they will be able to tell you much.
Obviously you must have performed a soft reset.
My PDA Freezes
Hi Everyone,
I have T Mobile MDA Vario II and my problem is the screen touch on which i use my stylus stick to tap on is not working. When i tap anything on the screen non of the functions are working which means i can not use the phone to make call or get any information from it.
I will be happy if anybody can help me to solve it and i have tried things like resetting and trying to calibrate again.
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#softreset
try reading this
Hey dude
I have a HTC TyTN which i *think* is the same device. Basically its rubbish when it sleeps on its own. Don't let it turn its self off. Do it yourself. Kills 99% of all known "comas" (which is what its known as) and only requires a touch of the off button
SOrry, just to add:
have you tried the soft reset underneath by the slider switch where you sink it with usb? Stick a pen or pencil in and hold for a second. If all goes well you won't loose any info and it will restart. Then you can go into system and turn off autosleep.
Related
can anybody help me please. I need help, my cruise isn't turning on, it gets to that windows mobile screen and it stays there...the last program i used was htc home customizer and it froze up so i had to remove the battery and restart it, and now it won't get pass the windows mobile screen...thanks for any help yall may offer...I really really appreciate it
themug05 said:
can anybody help me please. I need help, my cruise isn't turning on, it gets to that windows mobile screen and it stays there...the last program i used was htc home customizer and it froze up so i had to remove the battery and restart it, and now it won't get pass the windows mobile screen...thanks for any help yall may offer...I really really appreciate it
Click to expand...
Click to collapse
sounds like you need a hardreset
It does sound like you need a hardreset. This will of course wipe everything off your device and put it back to factory default.
Softresetting (rebotting) the device is easier though than removing the battery and stuff: use the stylus to push the reset trigger in the little pin-hole at the bottom of the device.
thanks for the help, it turned back on after about 10 attempts to turn it on, but thanks for the help
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
hello i am a new user on xda i have got a problem while during flashing or installing rom its got error on reattempt it become frozen after a reset now its not working absolutely black screen and no recognition on desktop even not in usb mobe what should i do now i need a great help otherwise i would loose this set
Please provide information about what phone you are using .-
Friend i am using orange spv M3100 i shall be highly thankful if you helped me in that regard
So you have a hermes.
I suppose you tried to flash a custom rom & not an official.
Have you done the basic before flashing? I mean if you have CID/SIM unlocked your phone? If not you may have bricked/destroy your device .
If you haven't already read this guide about unlocking.
Also take a look at this thread. It has everything about Hermes.
This is how far I can go because I don't own a Hermes. I wish you to find the solution of your problem .-
thanks for helping me actually my mobile was unlocked before i was flashing it with htc binkys before that i flashed my mobile with htc ultimate v2 during fiashing from ultimate to binkys error occured now when i switch on my phone the windows ultimate screen appears then becomes black and after some times when i press the on button screen becomes white also when i send a call to this phone screen turns on but no ring and no button functions thats the whole story what should i do now really i have very bad feelings without this mobile its my best friend also what is kitl trick
Don't mention it. I'll be glad if I'll help even a little bit .
Why don't you try to do a hard reset?
Ofcourse you will lose your data but it may revive your phone .-
Thanks friend i have done it you know some great person like you guided me and i did it you know what i did i pressed the external ok and power button simultaneously then i pressed the soft rest button and kept pressing both buttons with this bootloader mood appeared i connected it to desktop and ran the official rom thanks Allah i get back my phone really great feelings i also want to know how to hard reset a dead phone thanks friend
A friend brought me a good one today. He has an AT&T Touch Pro with a touch screen issue.
He brought me the phone months ago and I flashed the ROM. All was good. He then deleted a bunch of files one night accidentally and hard booted the phone in an attempt to get the files back. Upon hard reboot the phone hung at the calibration screen and he could not get past that. To describe, the screen calibration works on 3 of the 4 corners, if you hold the press the stylus to the screen quite firmly, but the top right corner will not calibrate however long I told the stylus to the screen.
He brought it to me today and I figured that a fresh ROM would resolve the issue. So I loaded a new ROM and the phone hung again at screen calibration. So I did some research and found a "welcome.not" work around to get us past the screen calibration issue. This was successful and I was able to get us to the home screen.
The issue is that the screen is very unresponsive and I have flashed the device so it's not a ROM flash issue. Is there a driver he might have accidentally deleted that is not reinstalled on a ROM flash? I know I am probably grasping at straws here but I thought this community might have some insight to what the issue is.
I have also considered the idea that I may need to replace the digitizer for this phone if that is the issue and am prepared to do so but thought I would throw this question out to the community for any tips/tricks or ideas you may have before cracking the case on this thing.
Thanks for your help in advance.
--Mike
Oh and I forgot to mention that sometimes the screen works if you tap it continuously but most times, there is no response.
--Mike
Moved as not ROM Development.
Hey Mike,same issue over here.I couldn't find any solutions so far.By the way,what's that "welcome.not" thing?
Well,after some google search i ended up with this.http://bittangents.com/2008/10/28/removing-welcome-message-doctors-appointment-on-pocket-pc-2003/
I suppose that you were meaning that...right?
Check out this one too
http://forum.xda-developers.com/showthread.php?t=355010
The calibration of the screen
IWPantel - Thanks for referring to my blog
To stop the welcome message, you need to put the Welcome.NOT in the root of a sd card or of the device. I don't believe this is your issue, however.
There are typically three reasons why the screen will become unresponsive.
#1 You have a bad touchscreen. Assuming that the screen was working perfectly, I highly doubt this is your issue.
#2 You are calibrating the screen with the stylus straight up. Believe it or not, the touch point changes if you are straight up and down, or if you have the stylus as if you are writing. The angle will affect the touch point.
#3 You have a conflicting .reg file in the Application or Platform directory of the handheld. The calibration settings are stored in the device's registry and they need to be updated. If you did a persistant registry tweak (where it exports the registry into NV ram, the calibration settings will overwrite the calibration settings you create on system startup.
Feel free to contact me with any questions.
-Brent
brentblawat said:
IWPantel - Thanks for referring to my blog
To stop the welcome message, you need to put the Welcome.NOT in the root of a sd card or of the device. I don't believe this is your issue, however.
There are typically three reasons why the screen will become unresponsive.
#1 You have a bad touchscreen. Assuming that the screen was working perfectly, I highly doubt this is your issue.
#2 You are calibrating the screen with the stylus straight up. Believe it or not, the touch point changes if you are straight up and down, or if you have the stylus as if you are writing. The angle will affect the touch point.
#3 You have a conflicting .reg file in the Application or Platform directory of the handheld. The calibration settings are stored in the device's registry and they need to be updated. If you did a persistant registry tweak (where it exports the registry into NV ram, the calibration settings will overwrite the calibration settings you create on system startup.
Feel free to contact me with any questions.
-Brent
Click to expand...
Click to collapse
Brent, I had the same problem here! My Fuze simply stopped responding to my touchs....
#1 Taking this as true
#2 I tried a hard reset, but nothing happens. I can not touch the screen to calibrate
#3 I just can not understand what you proposed.
Please, help me!
I don`t know why, but my cell just back to normal!
Now it's everything working!
@brentblawat - How come you are a Junior Member when your answer is so hardcore.
Anyhows, I have the same problem with my phone, I have tried all the software tricks I could think of. I guess your point 3 asks us to manually enter the calibration data in registry. Have tried it doesnt work.
I cant replace the hardware as I have Tmobile MDA and I dont get the spare parts for this here. the digitizer is different from the one in Touch pro.
Hello everyone,
My secondary phone is a HTC TyTN II. It's running Shifu V4.3 Windows 6.5 Custom ROM with Hard-SPL 3.49 and Radio Version 1.70.19.09. Recently, my phone's screen turned white and didn't go no matter how many times I soft-reset or hard-reset it . It happens when the phone is idle for long periods of time, like perhaps 3-4 hours. It also happens when I download 2-3 apps simultaneously from Windows Marketplace. When I do so, random multi-coloured lines appear all over the screen and then it turns completely white. I still hear the sounds when I slide out the keyboard or when I tap on the screen. Could someone please help me out? I really love this phone and I don't want to leave it in this state. I tried searching the forums for anything related to this, but unfortunately, couldn't find any thread or post that was helpful
Thanks alot for any help or advice you guys offer .
Service center only