can anybody help me please. I need help, my cruise isn't turning on, it gets to that windows mobile screen and it stays there...the last program i used was htc home customizer and it froze up so i had to remove the battery and restart it, and now it won't get pass the windows mobile screen...thanks for any help yall may offer...I really really appreciate it
themug05 said:
can anybody help me please. I need help, my cruise isn't turning on, it gets to that windows mobile screen and it stays there...the last program i used was htc home customizer and it froze up so i had to remove the battery and restart it, and now it won't get pass the windows mobile screen...thanks for any help yall may offer...I really really appreciate it
Click to expand...
Click to collapse
sounds like you need a hardreset
It does sound like you need a hardreset. This will of course wipe everything off your device and put it back to factory default.
Softresetting (rebotting) the device is easier though than removing the battery and stuff: use the stylus to push the reset trigger in the little pin-hole at the bottom of the device.
thanks for the help, it turned back on after about 10 attempts to turn it on, but thanks for the help
Related
Can somebody please help me
My PDA vario 2 the touch screen have frozen and i can not use it
None of the bottons are working and at the moment it is lock and strugling to unlock.
Please help i have vital information on it
Thanks
Hi Babes,
I don't know much, but I do know that the sweet people on this forum would very much like to know a lot more details about your device before they will be able to tell you much.
Obviously you must have performed a soft reset.
My PDA Freezes
Hi Everyone,
I have T Mobile MDA Vario II and my problem is the screen touch on which i use my stylus stick to tap on is not working. When i tap anything on the screen non of the functions are working which means i can not use the phone to make call or get any information from it.
I will be happy if anybody can help me to solve it and i have tried things like resetting and trying to calibrate again.
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#softreset
try reading this
Hey dude
I have a HTC TyTN which i *think* is the same device. Basically its rubbish when it sleeps on its own. Don't let it turn its self off. Do it yourself. Kills 99% of all known "comas" (which is what its known as) and only requires a touch of the off button
SOrry, just to add:
have you tried the soft reset underneath by the slider switch where you sink it with usb? Stick a pen or pencil in and hold for a second. If all goes well you won't loose any info and it will restart. Then you can go into system and turn off autosleep.
My Problem is,
Frequently my Touch Pro will have a black screen when i try and turn it on. Its really bugging me because i dont have insurance When i try and go to my landscape mode it will stay in portrait. sometimes (1 out of every 50 times) it will actually load in landscape allowing me to text. If the screen turns off and i try and turn back on its not gonna happen. I can get the screen to come on by pressing the power button on\off over and over until it, well just happens...
If anyone knows a solution to this problem i would greatly appreciate it. I should add that i have done a hard reset and it didnt fix anything at all. I havent changed the ROM so i dont see what the problem is. Thank you in advance
This could be either hardware or software. why don't you back your stuff up and hard reset?
nir36 said:
This could be either hardware or software. why don't you back your stuff up and hard reset?
Click to expand...
Click to collapse
I Only had contacts, which i couldnt figure out how to backup. everything else is on a micro sd card.
I figured that a hard reset would fix a software or hardware problem...
you can use PIMBackup 2.8 to back your data up. anything on your storage card will stay safe... but you should always remove it just incase.
hard reset.. and see what happens. if it's a hardware problem.. it most probably won't be solved.. unless a miracle happens. if it's software, it should solve everything since hardreset is as clean as you can get - that is, if your rom was alright in the first place.
Hi, did you figured out what happened?
cause mine just got the black screen, and the screen doesn't power up for anything... I just get the side lights of the screen on.
Did a hard reset solved the problem?
Thanks
hi there,
i was working yesterday and my phone was in my pocket and was squished against my keys! the screen is cracked... but it isn't, i think its the touch censor screen or something as i can see the screen fine just with a crack in the middle... anyway i cant use the screen to touch
i am using wm 6.5 and i accidentlly pressed the lock button in the start menu and cant seem to get passed the wm6.5 slide2unlock screen!
i try'd a soft reset but it is there as soon as it turns on
i dont want to hard reset because i would need to use the screen calibration (plus i havnt backed up my contacts and have some important messages!)
it is really frustrating i try'd deleting the files in the windows directory but it says it is read only and i cant delete it!
and im a bit broke and cant afford a new screen!
could someone please help
i would very much appreciate it
kind regards
Alex
alexsandros said:
hi there,
i was working yesterday and my phone was in my pocket and was squished against my keys! the screen is cracked... but it isn't, i think its the touch censor screen or something as i can see the screen fine just with a crack in the middle... anyway i cant use the screen to touch
i am using wm 6.5 and i accidentlly pressed the lock button in the start menu and cant seem to get passed the wm6.5 slide2unlock screen!
i try'd a soft reset but it is there as soon as it turns on
i dont want to hard reset because i would need to use the screen calibration (plus i havnt backed up my contacts and have some important messages!)
it is really frustrating i try'd deleting the files in the windows directory but it says it is read only and i cant delete it!
and im a bit broke and cant afford a new screen!
could someone please help
i would very much appreciate it
Alex
Click to expand...
Click to collapse
I'm no expert in this field, but have tried to sync the phone and unlock it from there? raspberry tru connect is an excellent program and if your d pad still works you should be able to install it and use the mouse cursor to do what you need to.
I have also heard of booting in safe mode, although I have no experience in it, but I'm sure if you check the wiki of your device you should find an answer.
Hope one of these help.
Just about right said:
I'm no expert in this field, but have tried to sync the phone and unlock it from there? raspberry tru connect is an excellent program and if your d pad still works you should be able to install it and use the mouse cursor to do what you need to.
I have also heard of booting in safe mode, although I have no experience in it, but I'm sure if you check the wiki of your device you should find an answer.
Hope one of these help.
Click to expand...
Click to collapse
m8 thank you very much that raspberry thing worked for me like a charm!
would this rasberry program work if i flash my phone with new rom?
like would it work on the screen calibration?! thanks!
alexsandros said:
would this rasberry program work if i flash my phone with new rom?
like would it work on the screen calibration?! thanks!
Click to expand...
Click to collapse
Not that I know of because of the installation needed on the device. If the ROM you are installing does not have the setup features and are already calibrated then you can install the program like before and be good to go.
I'm sorry, I know this isn't what you wanted to here.
Just about right said:
Not that I know of because of the installation needed on the device. If the ROM you are installing does not have the setup features and are already calibrated then you can install the program like before and be good to go.
I'm sorry, I know this isn't what you wanted to here.
Click to expand...
Click to collapse
would it be possible for you 2 attempt it when you next flash your rom? and pm me or reply to thread
because it is seriously bugging me knowing im stuck with this rom until i can buy a new screen
kind regards
alex
alexsandros said:
would it be possible for you 2 attempt it when you next flash your rom? and pm me or reply to thread
because it is seriously bugging me knowing im stuck with this rom until i can buy a new screen
kind regards
alex
Click to expand...
Click to collapse
Sure thing. I should be flashing this weekend if not sooner. Trying to get a few programs to play nice together and not having any luck.
I'll let you know when I do and we'll see if it works and go from there.
http://goatechno.blogspot.com/2008/12/windows-mobile-stuck-at-screen.html
is this what you guys need.
i attempted to run the .cab file for battery status, and when i did that it started installing then suddenly froze, then upon resetting the phone using the button on the bottom, it loads to the today screen as it were, and then freezes and will not respond atall, i know it isnt a fault with the touch screen as i have to enter my PIN before it gets to the today screen.
i am new to this so do a "dummies" guide as it was any help will be gratefully recieved.
Richard
Um i have a feeling that you may have a little problem here.
I dont know a brilliant fix for this other than to say to do a hard reset. BUT this well restore it to defult, factory settings as when you got it. So back up your phone of anything important before you do it.
To do it hold down the start and ok buttons and press the reset button. Wait for it to bring up the screen saying 'to restore press send'.
I cannot think of a reason but if its crashing i would think that it would be having problems with loading the files for today so i would guess that on the grounds that the install didnt finish it has, unfortunately corrupted some files.
ahh thanks, got it sorted now
My phone is unaccessible since wrong registry changing. (Black Screen after BIOS Screen) and I want to fix the registry.
Is there any program to access my PDA's registry in my PDA's condition???
NEED HELP, so urgent.
my PDA= Wm6.1 pro
mymailx said:
My phone is unaccessible since wrong registry changing. (Black Screen after BIOS Screen) and I want to fix the registry.
Is there any program to access my PDA's registry in my PDA's condition???
NEED HELP, so urgent.
my PDA= Wm6.1 pro
Click to expand...
Click to collapse
If you can not access phone you are unable to change the registry. Have you tried performing a hard reset? Are you able to access bootloader?
Fallen Spartan said:
If you can not access phone you are unable to change the registry. Have you tried performing a hard reset? Are you able to access bootloader?
Click to expand...
Click to collapse
Hi Fallen Spartan, I really appreciate that you wanna give me a hand of this problem.
Actually, I almost perform hardreset, (pressing the softkey and press reset using stylus) a grey screen show up to confirm but then I cancel it and I decide to go to this forum to find a better solution before I do a hardreset. Because I want to save my email dan especially SMS.
About Bootloader, I've never try it, could it do something to access my PDA's registry? Would you mind to explain me how?
mymailx said:
Hi Fallen Spartan, I really appreciate that you wanna give me a hand of this problem.
Actually, I almost perform hardreset, (pressing the softkey and press reset using stylus) a grey screen show up to confirm but then I cancel it and I decide to go to this forum to find a better solution before I do a hardreset. Because I want to save my email dan especially SMS.
About Bootloader, I've never try it, could it do something to access my PDA's registry? Would you mind to explain me how?
Click to expand...
Click to collapse
Unfortunately if your device does not boot up your only option may be a hard reset or to flash another rom. I only asked about bootloader as you need to access it to flash a rom. What happens when you try to reboot?
Fallen Spartan said:
Unfortunately if your device does not boot up your only option may be a hard reset or to flash another rom. I only asked about bootloader as you need to access it to flash a rom. What happens when you try to reboot?
Click to expand...
Click to collapse
Thank you for responses, Fallen Spartan.
So Hard Reset is the only way...?!?!
My PDA is X1 with WM 6.1 (original ROM), after I press the power button it shows Sony Ericsson and Xperia Screen then it just get blank so I have to cut off the battery to turn it off. (normally Windows Mobile Screen)
Flash a ROM? doesn't that also unable to save my eMail and SMS, right?
Sorry if I am asking too much because I'm very new for something like this on PDA.
mymailx said:
Thank you for responses, Fallen Spartan.
So Hard Reset is the only way...?!?!
My PDA is X1 with WM 6.1 (original ROM), after I press the power button it shows Sony Ericsson and Xperia Screen then it just get blank so I have to cut off the battery to turn it off. (normally Windows Mobile Screen)
Flash a ROM? doesn't that also unable to save my eMail and SMS, right?
Sorry if I am asking too much because I'm very new for something like this on PDA.
Click to expand...
Click to collapse
Yes flashing a rom is similar to a hard reset in that it wipes everything off your device and restore factory settings.
As I don't own a X1 I cannot comment if anything else could be done. But from what you say, it looks like a hard reset may be your only cure. For future reference, its always best to backup your device (contacts/emails/sms/settings etc etc) for instances like this
Okay I think the solution is only hard reset.
I'm sorry for the 2 threads because I am new member and I didn't read the rules.
Actually I posted 2 threads because yesterday I posted my problem in X1 discussion, but after a day waiting, there's no answer too. Besides, I really need my PDA back on early for my med college thing back.
Thank you for helping... and I really appreciate it much.