first of all... sorry guys but i have tried almost everything but... nothing works... I'm trying to install a newer windows on my wizard g4 with windows vista (i seen that is the harder way) but nothing happens ... something i'm not doing right so... please can someone post some links step by step?
thanks a lot
1. DOwnload Wnidows Mobile Device Center and install ur PC
2. COnnect your device until sync complete
3. Run RUU
ducbinh.vn said:
1. DOwnload Wnidows Mobile Device Center and install ur PC
2. COnnect your device until sync complete
3. Run RUU
Click to expand...
Click to collapse
i had wmdc and ... jut for the ones like you... is not so simple...its not working "just like that"
anyway i installed winxp and this post is not necessary anymore so...if someone can close/remove it...
Related
Hi, maybe some one will can help me.
I have a I-mate SP5. A time i don't use it (i don't know if someone else put his nose on it in this time). And now when i push the power button on screen i see:
" Tornado IPL 2.00
Tornado SPL 2.00.0008
Tornado "
And that is all. My PC don't recognize it. I tray the Hard Reset but don't work, don't appears to pres " 0 ".
I don't know what to do.
Please help me.
maybe a keyboard problem...
Verify that all the keys of the keyboard and especially the camera key are not remained pressed.
Sorry for my poor english and hope it could help you.
It's bootloader.
Looks like BINFS (place when system files are) has been formatted.
My advice - download rom and flash device.
But how to do that when i can't connect to ActivSync.
belair20 said:
But how to do that when i can't connect to ActivSync.
Click to expand...
Click to collapse
Download activesync 4.5 or better and use win xp maxhine. Also read karhoe's tutorial on how to upgrade.
PS
I hope your device is SuperCID. Please read all yuo can before you try flashing.
bllohin said:
Download activesync 4.5 or better and use win xp maxhine. Also read karhoe's tutorial on how to upgrade.
PS
I hope your device is SuperCID. Please read all yuo can before you try flashing.
Click to expand...
Click to collapse
I have on my pc the Activesync 4.5 but i unistal it, i download again and instal again. But nothing. I read all that i can find but all tutorials are about a worknig phone. not my case.
Well when I was flashing my tornado and came to bootloader I had the same problem, but then pluged on diffrent usb port and windows asked to install unsigned drivers to which I said yes. After a min or two I was able to continue to next step which was to check "info 2" then do format BINFS.
Anyhow, just make sure you read karhoes instructions and dont try to flash yet if you didnt superCID as it wont work.
i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€
bear79 said:
i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€
Click to expand...
Click to collapse
Just flash it with the rom for the X650 and you'll be back to your old self. The fact that it can still boot is a good thing since apparently you did not brick the device.
when i try too boot my X650 my screen becomes white and nothing hepens.
then i connect it with pc and recognize it.
i thing that i can flash it.
any other solution?
thanks
Flash from your pc then if your pc recognizes it. By pressing camera+power+reset0buttons i'm guessing you are talking about the bootloader.
yes.for bootloader menu i am saing.
how i can boot it from pc?
if you are stuck in bootloader, then your pc will not recgonise the devise for activesync (or for the RUU software), i think you have to use mtty
i think thay mtty is only for HTC or i am wrong?
This is exactly why we are always telling people to read before doing these things, so that they do not mess up their devices.
Anyway, get your device in bootloader mode and connect it to the PC. You must kill Active Sync (I am assuming that you are using Windows XP and not Vista). In order to kill ActiveSync, you must open the Task Manager and kill the processes called rapimgr.exe and wcescomm.exe.
Once you've done that, you must run the upgrade/rom upgrade utility program in your computer and follow the instructions on the screen. [highlight]Please make sure that the rom that you are using is specific for your device.[/highlight] Otherwise, you will brick your device for certain...
Note that upgrade instructions are, under most cases, device specific. Make sure that you follow the instructions in your upgrade precisely. Most rom cooks post either Readme.txt files along with their roms or they post very precise instructions in the forums. What I just gave you here is a very general set of instructions that normally work for most devices. I do not have an Eten (never have), so I am uncertain if these instructions will be useful to you. Follow them under your own discretion. [highlight]I am not responsible for any damage to your device.[/highlight]
Good luck...
it ask me again to connect wiyh active sync
Ignore. was moved
HELP mE please
soo no solution has found
bear79 said:
soo no solution has found
Click to expand...
Click to collapse
Just read my post. If the device is in bootloader, it should not try to connect to activesync, the pc should only see a USB device. Look for a rom upgrade for your phone and look at the upgrade instructions and follow them exactly. Your phone is not bricked, it only needs to be re-flashed.
i have tried that but nothing heppens.
when i try too put it in bootloader menu my sreen becomes white.
is this bricked phone?
Yes if you cannot get into your bootlaoder, it is bricked.
HI i search forum and i dont find answear. I flashed many roms but i never had any problem with usb connection with PC. So when i flashed new ROM and kaiser restarted when the new ROM started to boot windows shows info "USB device not recognized" i tryied reinstal drivers, reinstal AS, tryied mtty method, tryied flash ROM from storage card (dont work, meybe i do something wrong i founded 1 thread but i dont know do it work). Guys plz helpp me sry for english i am from Poland.
medeis_jar said:
HI i search forum and i dont find answear. I flashed many roms but i never had any problem with usb connection with PC. So when i flashed new ROM and kaiser restarted when the new ROM started to boot windows shows info "USB device not recognized" i tryied reinstal drivers, reinstal AS, tryied mtty method, tryied flash ROM from storage card (dont work, meybe i do something wrong i founded 1 thread but i dont know do it work). Guys plz helpp me sry for english i am from Poland.
Click to expand...
Click to collapse
Go here- http://forum.xda-developers.com/showthread.php?t=396922
And look into the force-USB Hard Spl! You may need to change your Hard Spl! Remember to use jump spl to flash!
I usually just disconnect data cable>kill all the mobile processes on my pc using task manager>restart pc and it always works.
redbandana said:
I usually just disconnect data cable>kill all the mobile processes on my pc using task manager>restart pc and it always works.
Click to expand...
Click to collapse
Hey Red, I see you got your calendar working! Yea I have never had an issue with my usb, but I saw that he flashes alot and it kinda fit the explanation for force-USB!
dash... thx for link to thread but i cant copy nothing to my device..... and RUU aplication dont find any device, killing all proces of mobile dont work too....
medeis_jar said:
dash... thx for link to thread but i cant copy nothing to my device..... and RUU aplication dont find any device, killing all proces of mobile dont work too....
Click to expand...
Click to collapse
Can you get into the bootloader? Maybe reflash the ROM from bootloader mode!
I have harspl 3 56 flashed, the bootloader mode working, but windows dont reconigze my kaiser...
medeis_jar said:
dash... thx for link to thread but i cant copy nothing to my device..... and RUU aplication dont find any device, killing all proces of mobile dont work too....
Click to expand...
Click to collapse
no you don't kill the processes on your mobile. you kill them in your TASK MANAGER application in windows on your pc NOT your pcc/tilt/kaiser/device then restart your computer and connect once windows is fully loaded.
edit:
These are the programs that are running on my computer associated with data sync:
1) WmdHost.exe
2) mobsync.exe
I killed proces on my computer in task menager ;] restarted and nothing happened...
medeis_jar said:
I killed proces on my computer in task menager ;] restarted and nothing happened...
Click to expand...
Click to collapse
Try uninstalling activesync on your computer then re-install it! I have heard of that working in the Herald thread!
medeis_jar said:
I killed proces on my computer in task menager ;] restarted and nothing happened...
Click to expand...
Click to collapse
ok then open Windows Mobile Device Center on your computer>Mobile Device Settings>Connection Settings>Allow USB Connections
read my first post i tryied that,...
i tryied mobile center doesnt work too...
medeis_jar said:
read my first post i tryied that,...
Click to expand...
Click to collapse
doesn't state that in your first post. It just says you never had a connection problem.
If you manually go into bootloader and have data cable connected does it say serial or usb at the bottom?
redbandana said:
doesn't state that in your first post. It just says you never had a connection problem.
Click to expand...
Click to collapse
Hey Red, happy 1000 post day! Your bigtime now!
Yes but i wroted that after flash new rom i had and tryied reinstal AS ;] sry for missunderstanding
in bootloader write usb when is connected, when i put of cable write bottom
dashmaster1000 said:
Hey Red, happy 1000 post day! Your bigtime now!
Click to expand...
Click to collapse
thanks dash and thank you for all the suggestions regarding the calender
medeis_jar said:
in bootloader write usb when is connected, when i put of cable write bottom
Click to expand...
Click to collapse
Then you are connected to your computer even though it doesnt say on computer! Go ahead and flash a new ROM! As long as your bootloader says USB you can flash!
Hello, im trying to update the rom on my spv e650 which is a vox however i have followed the instructions (i think) and when i run the rom update etc the phone boots saying 0%
then reboots again and the update software just says "image corrupt" on all roms
any ideas
Thanks,
Have you done USPL?
Yes that appears to work fine
What OS are you using? XP or Vista or 7?
Vista 64x
also should point out that mobile centre keeps crashing when trying to flash also
You can flash using Windows XP.
It's work fine in XP
krzysio290 said:
You can flash using Windows XP.
It's work fine in XP
Click to expand...
Click to collapse
Its works fine in vista as well as in window 7 too.
So am i doing this correctly?
Launch SDA_ApplicationUnlock, unlock phone then soft reset the device
Launch uspl_116_jockyw and keeping go through the prompts
Launch ROMUpdateUtility for the rom
? or am i missing something out
Try it on a non-x64 PC! I am pretty sure it doesn't work on it. Once you flashed USPL though, you can simply flash again and again from SD-Card!
I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox
krzysio290 said:
I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox
Click to expand...
Click to collapse
This is how I did.Follow Instructions.
1) Connect your mobile with pc check whether its connected with active sync or not.
2) Use sda_application unlock.exe to unloc the mobile ..It will ask you to reboot.Dont reboot .Keep it as it is.
3)Then open uspl_116_jockyw.bat .Run it as administrator and it will as you to follow the instructions.just follow that .After all instructions the bat file will vanish.The screen of your mobile goes black.
4) Run Flash.exe from the ROM you downloaded.Wait for 10 mnts then it will reboot atomatically.
5) after reboot dont do anything ..Have some patience .it will do "cold reboot".It will take 5 mnts.
After this it will ask you to press OK to reboot .
Thats it .Enjoy Now.
Thanks
Yogusmilu
Edit
Got it working tried again and a different bootloader appeared
thanks for the help guys much appreciated
I use this method from first time
Maybe someone can develop HardSPL to our Vox
I would like to change my rom to another, but i have a problem.
I cant connect anymore the blackstone to the pc with the windows mobile device center ( i have windows 7). In device manager is not show the mobile device connected. i dont know what can i do to fix it.
So, i tried to upgrade the rom with the microsd, i copied blacimg.nbh and restarted the device by hold volume and power button, but it not flash.
I think becouse i have SPL
how can i change the spl without connect the blackstone to the pc?
thanx
claudioz said:
I would like to change my rom to another, but i have a problem.
I cant connect anymore the blackstone to the pc with the windows mobile device center ( i have windows 7). In device manager is not show the mobile device connected. i dont know what can i do to fix it.
So, i tried to upgrade the rom with the microsd, i copied blacimg.nbh and restarted the device by hold volume and power button, but it not flash.
I think becouse i have SPL
how can i change the spl without connect the blackstone to the pc?
thanx
Click to expand...
Click to collapse
You need to downgrade your usb drivers. Follow this guide on step-by-step procedure on how to flash a rom including how to downgrade drivers
http://forum.xda-developers.com/showthread.php?t=505377
Also, any further queries, please post in that thread