Hello, im trying to update the rom on my spv e650 which is a vox however i have followed the instructions (i think) and when i run the rom update etc the phone boots saying 0%
then reboots again and the update software just says "image corrupt" on all roms
any ideas
Thanks,
Have you done USPL?
Yes that appears to work fine
What OS are you using? XP or Vista or 7?
Vista 64x
also should point out that mobile centre keeps crashing when trying to flash also
You can flash using Windows XP.
It's work fine in XP
krzysio290 said:
You can flash using Windows XP.
It's work fine in XP
Click to expand...
Click to collapse
Its works fine in vista as well as in window 7 too.
So am i doing this correctly?
Launch SDA_ApplicationUnlock, unlock phone then soft reset the device
Launch uspl_116_jockyw and keeping go through the prompts
Launch ROMUpdateUtility for the rom
? or am i missing something out
Try it on a non-x64 PC! I am pretty sure it doesn't work on it. Once you flashed USPL though, you can simply flash again and again from SD-Card!
I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox
krzysio290 said:
I must flash&run USPL ever when I try flash cooked ROM. Are you agree?
HardSPL is great method, only flash ROM, but it isn't available on Vox
Click to expand...
Click to collapse
This is how I did.Follow Instructions.
1) Connect your mobile with pc check whether its connected with active sync or not.
2) Use sda_application unlock.exe to unloc the mobile ..It will ask you to reboot.Dont reboot .Keep it as it is.
3)Then open uspl_116_jockyw.bat .Run it as administrator and it will as you to follow the instructions.just follow that .After all instructions the bat file will vanish.The screen of your mobile goes black.
4) Run Flash.exe from the ROM you downloaded.Wait for 10 mnts then it will reboot atomatically.
5) after reboot dont do anything ..Have some patience .it will do "cold reboot".It will take 5 mnts.
After this it will ask you to press OK to reboot .
Thats it .Enjoy Now.
Thanks
Yogusmilu
Edit
Got it working tried again and a different bootloader appeared
thanks for the help guys much appreciated
I use this method from first time
Maybe someone can develop HardSPL to our Vox
Related
Guys
Im trying to update my C600 to the wm6 rom,
Ive unlocked (SuperCID) my phone, app unlocked as well. However when I try run TTP it comes up saying cannot connect followed by several other characters.
Im using a XP laptop nd have followed the instructions on the thread.
One other thing is that whenever I try run a ROM update official or unofficial Windows says that romupdateutility.exe is not responding...... and closes.
Ive tried doing a hardreset but still no joy
Please help!!!
thanks
Simon
after opening TTP are you selecting Serial and then USB from the drop down list??
ok.. make sure u r in bootloader mode and not in phone mode.
hold the camra key when the phone is off then plug in the usb cable
thanks guys
but yep definitley in bootloader mode and definitaly selecting usb coonection!
any other ideas?
I wonder if my phones got somethng wrong as i cant even install the official Orange Rom? even my phone works perfectly
Thanks
Si
oh.... r u using vista????
try updating the drivers!!! read the vista thred in the first post... that might help you
Well ive tried Vista nd Xp, I too have just read the Vista thread and downloaded the drivers
tried flashing again, PC rebooted at 20% One bricked C600
luckily its a corporate phone so will retry when I get my new one - lol
ok, i flashed BlackDiamond 3.1 rom and all seemed well
computer said everything was complete
phone was stuck on 99%, left for 10 minutes and nothing happened.
now phone starts in boot mode, wont hard reset, and isn't recognized by the computer to attempt a wizard_love flash
please help
Hi,
What did you do prior flashing a custom ROM? Give us more information regarding your device and settings so we can help you out better.
Devices stuck in a bootloader mode normally aren't bricked....that's actually a good place to stay sometimes!
Hugs
ok i have a g4 wizard and i was following the steps
here -> http://forum.xda-developers.com/showthread.php?t=298613
i had transerred and run Cert_SPCS.cab and EnableRapi.cab on the phone
then following the instructions
here -> http://forum.xda-developers.com/showthread.php?t=329147
i copied the nk.nbf file from the unrared BlackDiamond 3.1 .rar file to the SoftSPL folder and started the softspl process
everything was going well, it showed 99% on the phone and the computer said
that everything was finished while the phone said 99%, i left it plugged in to
see if it would complete and it never did, it was stuck at 99% and wouldn't budge
i tried soft resetting to see if it would help it along thats when it started up in boot mode
when i plug the usb cable in it shows up on the phone but my computer doesn't recognize it
also RUU is in the top right hand corner
Find the wizard love rom and flash it .....You can find links to it in the G4 section of the wizard forum. Then I suggest you unlock your G4.
teejayburgin said:
ok i have a g4 wizard and i was following the steps
here -> http://forum.xda-developers.com/showthread.php?t=298613
i had transerred and run Cert_SPCS.cab and EnableRapi.cab on the phone
then following the instructions
here -> http://forum.xda-developers.com/showthread.php?t=329147
i copied the nk.nbf file from the unrared BlackDiamond 3.1 .rar file to the SoftSPL folder and started the softspl process
everything was going well, it showed 99% on the phone and the computer said
that everything was finished while the phone said 99%, i left it plugged in to
see if it would complete and it never did, it was stuck at 99% and wouldn't budge
i tried soft resetting to see if it would help it along thats when it started up in boot mode
when i plug the usb cable in it shows up on the phone but my computer doesn't recognize it
also RUU is in the top right hand corner
Click to expand...
Click to collapse
golfernutnflorida said:
Find the wizard love rom and flash it .....You can find links to it in the G4 section of the wizard forum. Then I suggest you unlock your G4.
Click to expand...
Click to collapse
i have the wizard love rom on my desktop but my computer will not recognize that my phone is connected through the usb cable.
it says usb on the screen of the phone but the computer does not acknowledge that the phone is connected
golfernutnflorida said:
Find the wizard love rom and flash it .....You can find links to it in the G4 section of the wizard forum. Then I suggest you unlock your G4.
Click to expand...
Click to collapse
i have the wizard love rom on my desktop but the computer doesn't ackowledge that the phone is connected.
teejayburgin said:
i have the wizard love rom on my desktop but the computer doesn't ackowledge that the phone is connected.
Click to expand...
Click to collapse
Activesync does not work or connect while in bootloaders mode,if you say it shows usb in the bootloasders,it means your phone has established connection with your pc,just flash the love_wizard_rom and let it finish,hope it'll start working.As it's a G4 device,try the SoftSPL or HardSPL method to upgrade.
Cherrs !
I just had my phone hang on the welcome screen - and was able to get it into the bootloader screen, and reflash a base rom.
The one thing not mentioned is that on your activesync settings - you need to uncheck the USB connection item, so that the rom update utility can run.
Once I did this - I could flash the oem rom without issue
Good luck
i got it, thanks to everyone who offered suggestions!
ok well i tried flashing blackdiamond3.1 again and everything went great, computer said everything was ok
but phone stayed at 99% again, what am i doing wrong?
teejayburgin said:
ok well i tried flashing blackdiamond3.1 again and everything went great, computer said everything was ok
but phone stayed at 99% again, what am i doing wrong?
Click to expand...
Click to collapse
Did you try flashing either the tmobile 2.26 rom or the wizard love rom?
teejayburgin said:
ok well i tried flashing blackdiamond3.1 again and everything went great, computer said everything was ok
but phone stayed at 99% again, what am i doing wrong?
Click to expand...
Click to collapse
Which method are you using to upgrade ? SoftSPL or HardSPL ? have you tried any of these methods or you are just simply trying to flash black diamond straight without either SoftSPL or HardSPL ?
to unbrick your phone, you should try to do the unlocking sequence again. go back and use the lokiwiz02b and all of that jazz. if you fallow the guide to unlocking the phone, you should be able save it. i had the same problem, took it to a shop, they could not fix it, then bought a new phone thinking it would never work again. i got brave and fallowed the directions on the how to page for G3 phones and poof, it was up and running and i got a full refund on my newly purchased phone.
here is the link
http://forum.xda-developers.com/showthread.php?t=285435
golfernutnflorida said:
Did you try flashing either the tmobile 2.26 rom or the wizard love rom?
Click to expand...
Click to collapse
yea i flashed the wizard love rom and everything is ok now, but for some reason blackdiamond will not fully flash to my phone
zabardast_1 said:
Which method are you using to upgrade ? SoftSPL or HardSPL ? have you tried any of these methods or you are just simply trying to flash black diamond straight without either SoftSPL or HardSPL ?
Click to expand...
Click to collapse
i have tried soft_spl both times and it has gotten to 99% each time, then stopped
Try installing black diamond using the RUU MUN. Just paste the kb file in the directory of the RUU MUN. Then just double click the RUU installer.
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
hehh
same happend to me once. Go online and finde botton run , update utility 2.00.1
go step by step:
Disconnect your phone from the usb cable,disable any Firewall and Anti virus and reboot your Pc.
1. Make sure your phone is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your phone to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t Bluetooth for the Upgrade)
4. When you see usb appear at the bottom of bootloader screen
5. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
After then, install origial ROM. (u can try T-Mobile MDA Software Version (2.26.10.2) )
Let me know if it's working
ty man for ur reply , i have tried every possible solution, including mtty! no luck. from ur post i didnt understand the following
Go online and find botton run , update utility 2.00.1
Click to expand...
Click to collapse
did u mean button rom . if yes , what the 'update utility 2.00.1' ?
ty
can i use mtty to revive my phone? i found some command for erasing my entire rom in the phone , but it doesnt seem to work . help me
Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...
first of all... sorry guys but i have tried almost everything but... nothing works... I'm trying to install a newer windows on my wizard g4 with windows vista (i seen that is the harder way) but nothing happens ... something i'm not doing right so... please can someone post some links step by step?
thanks a lot
1. DOwnload Wnidows Mobile Device Center and install ur PC
2. COnnect your device until sync complete
3. Run RUU
ducbinh.vn said:
1. DOwnload Wnidows Mobile Device Center and install ur PC
2. COnnect your device until sync complete
3. Run RUU
Click to expand...
Click to collapse
i had wmdc and ... jut for the ones like you... is not so simple...its not working "just like that"
anyway i installed winxp and this post is not necessary anymore so...if someone can close/remove it...