hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.
hi
Go Into BootLoaded mode, Reflash with Aku2.2_Novid. once complete install anyrom you want
Check out this post http://forum.xda-developers.com/showthread.php?t=310452
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
^^ ...
hahaha....
now .... charging your phone ... and then turn on your PDA , at the bootloader screen (red,blue,green ... ) , connect you phone with PC .... you will see the USB at the bottom of the screen ... then .... install with the original ROM ...
here is the ROM
http://tom-love.net/Rom/Prophet/WM6.0/Prophet_PV_Temp.zip
i allready did that, and the error 300 keeps coming
what else can i do
ac ... ^^
your phone is G3 .... not G4 ... ^^
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000 is G3
try G3 ....
did you read it before !!!
http://forum.xda-developers.com/showthread.php?t=321839
Hi ,
I've try to upgrade my O2 xda, I've read IPL and SPL .0001, then i think is a G4, I've connect to PC, launch hardspl.bat from update_package and then the smartphone restart, but the screen remain white, activesync 4.5 not recognized it.
Please help me!
I've also try to use the alternate hardspl file of this thread: http://forum.xda-developers.com/showthread.php?t=353547&highlight=white+screen+hardspl but nothing.
white screen after launch jumpspl and must soft reset to continue.
I've a Dutch O2 XDA with SPL 2.15.0001.
Is possible to have lock CID or similar?
Someone can help me?
Can I make some hardreset or similar?
Thanks in advance!
G4 devices cannot be CID unlocked although the HardSPL circumvents the CID procedure.
The white screen is what happens after you hard SPL: http://forum.xda-developers.com/showthread.php?t=353547
You can hard reset although you will loose all your data. To hard reset, hold the camera button, the comm manager button and soft reset. Then follow the message on screen.
Thanks!
If I've a CID locked G4 I can't upgrade?
I've read the guide but I've not found a reply to my question. I've also try the alternate hardspl utility.
You can upgrade a G4 without CID unlocking (I have a g4 and WM6.1) You should be able to upgrade after SIM unlocking your device and HardSPLing your device. Try flashing a ROM when the device is connected but with the white screen and see if anything works on the PC.
When smartphone is white screen activesync not recognize any.
How I can verify if there is CID lock?
If it is a G4, there will be a CID lock unless it's an unbranded (HTC) device.
The CID lock will not affect the flashing procedure.
Ignore the fact that activesync doesn't recognise it and see if an RUU will recognise the device.
I've try now with cofferom, when screen white the RUU not phone, connection error (264).
When your device starts up, what is the IPL and SPL displayed?
ipl and spl 2.15.0001
I explain my step:
First launch the file "Update_Package\Update_Package\HardSPL\HardSPL G4\hardspl.bat" this file launch in smartphone the file jump.exe then I click on Yes on smartphone and the white screen appears, after this on PC appears a RUU, I close this and lauch the file: CoffieITA\Flash tools\ROMUpdateUtility_NV_G4.exe but this not recognize the smartphone.
I wrong any? the first RUU after hardspl.bat what is this?
HardSPL has not succeded. Try softSPL rather than hardSPL and see if the RUU will connect.
I've undestand where I wrong, now I've completed the operation and I've SPL: 2.G4.4PDA is ok?
Yes. Now try and flash a ROM.
WORKING!
Now it is in italian!
Thanks a lot! Thanks!
No problem!
i was installing windows mobile 6 and then my device failed the copying of the new rom on step 3. after the setup i did a hard reset on my phone hoping it would get back to wm5 but now all i see is a screen freezing indicating
IPL 1.00
SPL 2.13.0000
GSM 02.07.20
OS 10.1.0.811
please help thanks in advance
While booting my htc neo showing a screen which contains:
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.47.21
OS 2.20.7.35
My problem is I cant upgrade my prophet. I have tried more than 7 - 8 different roms but everytime its showing connection error . and trying to recover the updradation process. please help me.
more details
Hi,
Can you give some more details like what OS you have in PC, does it show USB in the left corner of the phone.
Regards,
V.Balaji