Database Info

M600 stuck in bootloader after G4 rom flash

hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help

jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
i have the same problem too, i used g4 rom and now its stuck at bootloader rainbow screen.
my IPL is 1.00
SPL is 2.20.0001

jester gold card
after lots of looking and reading of threads i need to wait for Jester Gold Card
come on jester work your magic my M600 is now a paper weight.

jasonrabbit said:
hi can you please help i flashed my M600 with jester 2.20 G4 now my phone is stuck in bootloader.
if i hard reset then press send if comes up format failed
i have reloaded rom 2-3 times but still same fault
bootloader screen shows
IPL 2.09
SPL 2.20.0001
have i flashed my phone with the wrong rom ?
can my M600 be saved
thanks for any help
Click to expand...
Click to collapse
Hi,
Its very common to do mistake of flashing G3 device with G4 rom, and
no of people doing this mistake increasing every day.
Its very sad to have a bricked device, rather it wud hav been better
to search the forum thourouly before making attempt to flash.
Yes the only hope is Gold Card Project success,
We all r waiting for that day!

ic. Gold Card Project
anyway i did a stupid mistake that lead my prophet into a paper weight.
i click on the G4 rom thinking thats step 2...
now i cant down grade back to old wm5

If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now

CooT said:
If You & press camera button + reset
You'll get in the bootloader screen
after that try a ROM wich is your phone's
( I disconnected while updateing tot jesters AKU 3.3 )
Have a functional phone now
Click to expand...
Click to collapse
no, u cant flash anything now as g4 rom is inside a g3 device
and the moment u try to "downgrade" it will prompt for a NEWER FILE to be used

my m600 stucked at very starting screen help me plz
hi guys
i got a orange spv m600 i tried to unlock it from the stuff which i got online but instead i messed up the phone
its stucked at the vry first screen showing a orang logo
and
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
could any one help me out plz plz plz i am a new person and i dont know any thinig about this roms or any software u can email me my emial id is
[email protected]
subject m600(plz dont forget to mentioned in the subject field) bcoz i get loads of junk mail that y i delete them
thanks

Same Problem
I have a fried M600 that is also stuck in the "Orange" Screen when turned on...
How can I get past this?
I have tried re-installing the original ROM but it still refuses to boot.
What Installer do I need to download?
Which ROM would do the trick?
How do you install CAB files without Activesync?
Can anyone help me on this as I'm lost without my M600.....

Upgrade problems - prophet broken!!!

Hi every one, i've tried to install the last PDVIET rom, but upgrade was interrupted.
Now, my prophet not start, i've made a hard reset, but it stands on first stage when shows pda information.
My computer don't recognize it now, so i can't reinstall the rom!!!!!
Please help!!! what can i do !!!????

force it into bootloader mode

Thank you very much, It works!!

Madcap180 said:
force it into bootloader mode
Click to expand...
Click to collapse
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices

lookum said:
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
Click to expand...
Click to collapse
While pressing the camera button,softreset your device and it will go into the bootloader..

i think i hv bricked my prophet after upgrading of pdaviet rom.
the phone stalled after upgrading of rom and went reset struck on os 4.0.0.0 screen.
kindly help.
the bootloader mode as described.. is it in red/green/blue screen with word usb on the bottom left?
nothing happens when connected to pc...
activesync still cannot identify the device....
pls help...i am a noob on this....

did you downgrade to WM5 before upgrade?

zeroed said:
did you downgrade to WM5 before upgrade?
Click to expand...
Click to collapse
??? downgrade then upgrade ext rom?
if tats the case, no i did not do tat.
did i brick my phone???
what can i do now?

try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck

zeroed said:
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
Click to expand...
Click to collapse
got it back.
thanks for the response.
i also read wiki, now on pdaviet .3
seem like .4 having batt drain issue....

In Trouble
hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.

Help help help

I have a Imate Jamin, Well i never upgraded it so i tried to upgrade to Gullum WM6 touch, I tried to upgrade through this method http://forum.xda-developers.com/showthread.php?t=323013
But i had battery error battery was below 50%, so i upgraded it through Shell tool, i didn't knew its camera button is not working, after flashing complete i couldn't hard reset device so i have to flash to through RUU again, After this IPL and SPL both were 1.XX, OS 2.20.XX. but after it was complete it is stuck on imate splash screen, Then i flashed it with official RUU after which my Ipl, SPL and Rom where back to 1.XX but no results, and then someone here suggested to Flash with PROPHET NVID RUU i also did that now my splash screen is Qtek Ipl 1.00 Spl 2.20.00 Gsm 02.47.21, OS 2.20.7.34 but still it is stuck on slash screen, in all case USb is been detected and i m able to load bootloader through Holding Power off and Communition Mana Buttons. Please help me and reply what should i do now. I think my Phone is Bricked and dead.
Thank you,
Arvin.

Urgently Help Needed, Dopod 818pro shows 3 colored screen

I have problem with my 818pro. I upgraded to WM6.1 few months ago successfully with Prophet ROM 19974 M2D. Few days ago suddenly I cant hear anything from phone, but worked well with headset. I read some posts here and try to reinstall the same software which I used few months ago to upgrade from WM5 to WM6.1(with HardSPL G4). The Installation was successful, but when it was restarted, I can only see 3 color screen and USB is written on screen also can see (IPL 2.15.0001 and SPL 2.15.0001). I tried same software few times, but the result is same. The good thing is, I am still able to connect to my PC with USB.
Now I am not able to start my PDA. Every time I restart, It will show same 3 colored screen. and If i connect to USB, it will show on screen USB.
Can Please Please someone help me how can I Install and make it working. Please give me the links as well if possible.
I will be very thankful to you..
Please Help me..
Thanks in advance
Andy

uiell
try flashing back original OS.(wm5)
http://www.htc.com/sea/
[email protected]

Seems HARDSPL not installed.
Information from you.
IPL 2.15.0001 and SPL 2.15.0001
SPL is not HARDSPL already.
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
http://forum.xda-developers.com/showthread.php?t=353547
Try to reflash with PDAVIET NoVendor
But you need to go to Bootloader Mode first ( manually). Read how to do it.
Make sure battery enough.
And flash with the ROM above.
And do the HARDSPL again.
http://forum.xda-developers.com/showthread.php?t=405384
The SPL Information , if already HARDSPL should be SPL 2.G4.4PDA. Cos you have G4 Device.
Information for you : Installation, even not HARDSPL could be succesfull. But you will always stuck in Bootloader mode, like you have now.
So Reflash it first like I said and HARDSPL again.
Until SPL information like this SPL 2.G4.4PDA. Cos you have G4 Device.

Upgrading error, please help

While booting my htc neo showing a screen which contains:
IPL 2.15.0001
SPL 2.G4.4PDA
GSM 02.47.21
OS 2.20.7.35
My problem is I cant upgrade my prophet. I have tried more than 7 - 8 different roms but everytime its showing connection error . and trying to recover the updradation process. please help me.

more details
Hi,
Can you give some more details like what OS you have in PC, does it show USB in the left corner of the phone.
Regards,
V.Balaji