Database Info

Stuck at bootloader

Hi,
I have XDA Neo and last night, I upgraded my Neo (G4) to jesterz AKU 2.3 ROM with 8MB poolsize and after successful upgrade, I get first bootscreen with IPL, SQL and GSM but nothing happens after that as it just get stuck at this screen. Then I am resetting this device and then it gets into bootloader screen. I have tried doing hard reset using Comm+Camera+Reset Button but it doesn't halp as well...as it gets into bootloader again.
Could you guys help me to get my device working again?
Thanks.

downgrade to an original rom

I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx

Abib said:
I'm stuck in the same problem.. My XDA stops at the O2 Boot screen, showing the IPL (2.15.0001), SPL, GSM and OS.. and nothing happens..
And I can't downgrade or even upgrade to another OS version, 'cause any I ran RomUpgradeUtility says that the pda isn't connected to the PC..
Remembering: I am not stuck at the 3 colors bootloader screen. I'm stuck at the O2 IPLs BootScreen, where I am not able to communicate with the computer by USB..
What should I do now?
Thnx
Click to expand...
Click to collapse
You people should read before touching custom ROM's!
Hold both the camera and comm button to get in the 3 color screen. Then flash with an original ROM.
Wilson77 since you have a G4 device you can't just flash it with any ROM. Check the forum on flashing your G4 device.

Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!

Abib said:
Mccune, you're right.. curiosity suX!
I did the Bootloader Procedures (Camera + Reset) and now I'll try to downgrade to the shipped german rom, and then to the English Crossbow that ran nice since January..
But Thanx for the help!
Click to expand...
Click to collapse
LOL Noting wrong with cuiosity, on the contrary. But flashing the wrong way (specially the G4) may brick your device. Were just tryin' to prevent that by providing you with a lot of information

Black screen

Hi,
I try to change ROM from PDAMobiz Prophet WM6 V1.00 to Fantastic Mobiz XBow v1.1i. I made exactly what I was suppose to do. But after few minute i've got the error 300 "INVALID UPDATE TOOL". So I reset my S200, then it's stay on the blue page QTEK until I reset it. I try to upgrade again, but when i'm in the Bootloader mode, i connect the PDA, the letter USB appear on the PDA screen, but i've got the message "No device Connected, Would you like to try copying again", even if i still try few minutes later, it's stil say no device connected.
I don't know what can i do anymore.
Please need Help
Thanks for your help
Benjamin

What S200 you have? G3 or G4? What IPL/SPL Version?
Have you tested to use Step 2? Step 2 use a other Firmware Writer ...

G3
IPL: 2.10.0001
SPL: 2.20.0001
i don't know any other Firmware Writer. Can you tell me one please and where i can find it
thanks

ahm ... IPL/SPL with 0001 is a G4 ... have you write the G3 Firmware? if yes ... you have brick your phone!

by Brick , you mean it's definitly broken, i can do anything?
i was quit sure i used G3 version.

Do you have your dockingstation? Load your Batterie! Then try to enter the bootloader Mode! If you have black screen again ... send it back to you mobile provider and hope they exchange it.

no i don't have any dockstation.
so someone have more proposition please???

can you bring your device into bootloader screen?
from a first view it doesn't seem you bricked it (usually ipl and spl differ then (one is 0000 and one is 0001).
And as you still get an USB Icon i assume it is not broken (but i can't say that for sure).
Just try entering bootloader mode an then flash again (with a g4 firmware!) - see wiki for how to enter BL mode

Upgrade problems - prophet broken!!!

Hi every one, i've tried to install the last PDVIET rom, but upgrade was interrupted.
Now, my prophet not start, i've made a hard reset, but it stands on first stage when shows pda information.
My computer don't recognize it now, so i can't reinstall the rom!!!!!
Please help!!! what can i do !!!????

force it into bootloader mode

Thank you very much, It works!!

Madcap180 said:
force it into bootloader mode
Click to expand...
Click to collapse
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices

lookum said:
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
Click to expand...
Click to collapse
While pressing the camera button,softreset your device and it will go into the bootloader..

i think i hv bricked my prophet after upgrading of pdaviet rom.
the phone stalled after upgrading of rom and went reset struck on os 4.0.0.0 screen.
kindly help.
the bootloader mode as described.. is it in red/green/blue screen with word usb on the bottom left?
nothing happens when connected to pc...
activesync still cannot identify the device....
pls help...i am a noob on this....

did you downgrade to WM5 before upgrade?

zeroed said:
did you downgrade to WM5 before upgrade?
Click to expand...
Click to collapse
??? downgrade then upgrade ext rom?
if tats the case, no i did not do tat.
did i brick my phone???
what can i do now?

try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck

zeroed said:
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
Click to expand...
Click to collapse
got it back.
thanks for the response.
i also read wiki, now on pdaviet .3
seem like .4 having batt drain issue....

In Trouble
hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.

Error 300 ->INVALID UPDATE TOOL :(

Hello together, I want to put a WM6 ROM on my Wizard G4, but I get an error.
ERROR [300]: INVALID UPDATE TOOL
Can somebody help me please?
I made the G4 Hard SPL and have the IPL 2.21.0001 and SPL 2.21.Olip

Try using the attached RUU_MUN - this one always works for me
Just copy the image file into the same directory to run.

A credit to the community
Works a treat - thank you!

My phone is dead
After I flashed my phone with the above tool, the phone hanged on the start-up and now dead. It cannot even power on. Even when charger is fixed it does not power on at all.
Please what do I do to revive this phone?
Thanks in advance.

babyelephantt said:
After I flashed my phone with the above tool, the phone hanged on the start-up and now dead. It cannot even power on. Even when charger is fixed it does not power on at all.
Please what do I do to revive this phone?
Thanks in advance.
Click to expand...
Click to collapse
chech this
http://forum.xda-developers.com/showthread.php?t=274236
http://www.filestube.com/c15dcecb57d0222b03ea/go.html
about bootloader mode(wiza 200 bootloader mode(holding down the camera button then press the soft reset whole..
that should bring you to bootloader.. then flash!)
BR
UMER

suggestion
comec said:
Hello together, I want to put a WM6 ROM on my Wizard G4, but I get an error.
ERROR [300]: INVALID UPDATE TOOL
Can somebody help me please?
I made the G4 Hard SPL and have the IPL 2.21.0001 and SPL 2.21.Olip
Click to expand...
Click to collapse
hello this happened to me at least tentimes LOL so i can give advice:
juste take the NBF file from rom you wanto to upload to your WIZARD, copy it in another ROM folder (ROMS use to have their own RUU) and then just upload XD i did it as i said at least 10 times

s200 g4 cid unlock mistake

hello
i have a big problem with my qtek s200 ,
i made a terrible mistake
i made cid unlock and my s200 is a G4 version
i only see that was a g4 version after ai made the mistake. i am a ****ing asshole .
my version is a G4
ipl 2.10.0001
spl 2.10.0001
Now when i turn on the phone it stuck on the start up screen.
I manualy put on bootloader mode , but every time i tried to flash phone with original version from my country, Portugal. I always get error 302 and dont even start's to flash. it stays always on the rainbow screnn
i already tried many things that i saw here posted but nothing.
i always stay on the rainbow screen, i cant even start flashing the phone
I already changed cable and pc and nothing
can anyone help me?
Thanks in advance

what i did was this that is Cid unlock
http://wiki.xda-developers.com/index.php?pagename=Prophet_CID_Unlock
and on this page says that if
just upgrade to a new G4 ROM and you should be fine.
the problem is that when i put the phone in boot loader mode and try to make the update i get the error [264]: connection
and dont starts updating
can someone help me please

WARNING DO NOT PERFORM THIS IF YOU HAVE A G4 PROPHET (IPL/SPL 2.xx.0001)
Click to expand...
Click to collapse
Have you tried this here ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
If the above is successful you will need to hard spl \ soft spl your device then you will be able so go here:
http://forum.xda-developers.com/showthread.php?t=405384

yes i already tried this
I always get error 302 and dont even start's to flash. it stays always on the rainbow screen
any more ideas !!!

read this carefully