I am having an issue with activesync automatically changing the time on my WM 6.1 device to the system time on my laptop. I travel all over the country and need the phone to stay on the local time, vs the laptop system time which is set to home. I figured out how to stop the automatic sync before, but I have since had to wipe the phone clean and start over and now I can't figure out how I did it before. Any ideas?
Just connect your device with your laptop with activesync
On the laptop in the open active sync windows navigate to tools / options
In the dialog box which appears there is a "Settings" button. Press this button.
In the next box at the bottom there is a check box "Synchronize PC Date and Time Upon Connecting" Uncheck this box.
Hope this helps
Thanks smrz,
I'm running Windows7 and can't seem to find any menu in the Sync Center or Mobile Device Center that has what I need.
Thanks smrz,
I'm running Windows7 and can't seem to find any menu in the Sync Center or Mobile Device Center that has what I need.
Related
Evening all - not sure exactly where I should ask this, so will try here
For some reason, everytime I try to sync to my PC, WMDC has started displaying the Add/Remove programs prompt whenever I connect.
I have tried uninstalling WMDC and a hard reset of the device, but it makes no difference and it keeps doing it.
I normally don't install anything on the device using WMDC Add/Remove so no sure why it keeps asking - it was working okay for months and just started this over the weekend.
Does anyone know if there is a "queue" or "file" or registry key that WMDC looks for to denote it needs to run Add/Remove programs when a device connects?
Cheers
Merlin
Hello all... I'm a total newbie to Windows Mobile and this site. Hopefully I've found the right place to post this. I have Win XP SP2 with activesync 4.5 and HTC touch pro (att fuze). My device connects to the PC fine but ONLY as a guest (tried this with someone else's device as well, same issue). I plugged my device into my co-workwer's PC and the got the option to set up a sync partnership. This option has never appeared on my PC. I've deleted/reinstalled activesync multiple times and tried other suggestions found here (checking & unchecking "advanced network functioality" and "ask about connection type" in USB to PC settings on the device). Prior to all of this I had software called Intelatrac installed on my PC. This is a "task tracking" program which uses activesync to connect to a Windows Mobile PDA device. I don't use this software in my current job so I uninstalled it. Somthing in the Intelatrac/Active sync set up is possibly the issue. I've connencted multiple devices to my PC and to another PC which has Intelatrac. NEVER is there an option to set up a partnership. Only guest connections automatically occur. All menu options in activesync except for "connection settings" are "grayed out" ("Syncronize", "Mobile Device", "Delete Moblie Device"). Any ideas what to look for? I have tried my IT department for the past month but have yet to find anyone who has a clue. Sorry for the long description.
djzentz said:
Hello all... I'm a total newbie to Windows Mobile and this site. Hopefully I've found the right place to post this. I have Win XP SP2 with activesync 4.5 and HTC touch pro (att fuze). My device connects to the PC fine but ONLY as a guest (tried this with someone else's device as well, same issue). I plugged my device into my co-workwer's PC and the got the option to set up a sync partnership. This option has never appeared on my PC. I've deleted/reinstalled activesync multiple times and tried other suggestions found here (checking & unchecking "advanced network functioality" and "ask about connection type" in USB to PC settings on the device). Prior to all of this I had software called Intelatrac installed on my PC. This is a "task tracking" program which uses activesync to connect to a Windows Mobile PDA device. I don't use this software in my current job so I uninstalled it. Somthing in the Intelatrac/Active sync set up is possibly the issue. I've connencted multiple devices to my PC and to another PC which has Intelatrac. NEVER is there an option to set up a partnership. Only guest connections automatically occur. All menu options in activesync except for "connection settings" are "grayed out" ("Syncronize", "Mobile Device", "Delete Moblie Device"). Any ideas what to look for? I have tried my IT department for the past month but have yet to find anyone who has a clue. Sorry for the long description.
Click to expand...
Click to collapse
Actually, long descriptions are best to identify problems
This is just a suggestion, but maybe this Intelatrac software left something in the registry that is being used by ActiveSync. My advise to you would be to first uninstall ActiveSync and then look for entries for this program in the registry and delete them if you find them. You could use autoruns to see if there are any processes/dll loading that shouldn't be there in the first place as well. Hope this helps...
Thanks for the reply... a problem with something left in the registry is exactly what I thought might be the problem. This being my PC at work, I don't have authorization to even look at the registry let alone edit it. Only our IT "help" desk group can don that . Through unofficial channels I got access and found that there are at least 20 references to "Intelatrac" left in the registry. If I can ever get these folks to look at the problem I'll report on the results. Thanks again!
I connect my Kaiser which uses latest HyperDragon ROM to Activesync on my PC which uses latest XP SP3 > I manage to connect it > When I go to My Computer I can`t see "Mobile Device" icon there where to go view my files and if I try to go there through Activesync`s Explore it redirects it to C:\
Last time when I managed to view my files on my pc was over month ago :I
edit: I can do anything via AS but not view my files.
Lokioki said:
I connect my Kaiser which uses latest HyperDragon ROM to Activesync on my PC which uses latest XP SP3 > I manage to connect it > When I go to My Computer I can`t see "Mobile Device" icon there where to go view my files and if I try to go there through Activesync`s Explore it redirects it to C:\
Last time when I managed to view my files on my pc was over month ago :I
edit: I can do anything via AS but not view my files.
Click to expand...
Click to collapse
Hi, have you checked your a.s. settings to see what is syncing? You say it used to sync ok and that you could view your files using a.s. explorer, but that it stopped one day?
Did you install any apps then, or make any system changes? If your settings are good, have u tried deleting the partnership on both your device and computer, then restablishing it again? Also try unchecking "enable faster data syncronisation" in settings/usb to pc (if hyperdragon has that function).
Hope this helps but get back to me if it doesnt.
It sometimes helps depending on which operating system you are using (XP or Vista) to change the following settings.
Start>Settings>Connections>USB to PC
• remove the check mark from Enable advanced network functionality
Soft Reset not necessary but recommended. When device is up and running and you removed all existing old profiles from computer as suggested in previous post, then plug device in.
Make sure that your active sync settings allow for USB connection. Go to connection settings in your active sync section and check this as well..
Good luck!
Hi all,
i am really very disappointed, already spent around 12 hours looking for a solution,
the WMDC does not run at all on my Vista machine which is Business 32-bit,
i tried to uninstall, install again, reboot, more than 20 times, with no luck
this is making me creazy, i couldn't find someone suffered the same
please help me, i am willing even to pay for this help
regards,
sounds like a corrupt vista install I would reinstall or restore it back to default
how to confirm its vista
Hi..
thanks for your post?
how did you confirm that its vista issue,
could i just put the vista CD and ask to rebuild?
will it remove my files on the system
yes itll delete everything
my advice would be to get 7
"i couldn't find someone suffered the same"
was a bit of a give away
you could try another vista computer to verify
or if you're using usb you could try using bluetooth and virsa versa
personally I never had any problems with vista wmdc
its not showing the interface
my home vista machine is working fine,
my machine, is not, its not yet about connecting my mobile,
the software it self is not showing,
i install it, without any error msg, it shows in the start menu, and in the programs of control panel,
but when i click on the icon in the start menu, nothing show at all,
i belive it should show the interface even if the mobile is not connected yet,
acctually it shows ew devices
hi.
it shows new devices as unknown device then the driver couldn't be found
if it's a work computer they prob just removed the rights of installing new hardware
from your user account
i tried both with my user which is part of the administrators group, and also tried with the administrator account directly,
both resulted the saem
it takes around 1 minute on the "0 remaining time"
then it just hide without saying its finished or completed,
the result is an icon in the start menu,
and in the windowsmobile directory in windows folder, it shows some files, like setup, and drivers
then if i check properties of the icon in the start menu, it shows that its for first time installation,
i click on it, it install again
then the changes are on the windowsmobile folder in windows folder more EXE files are there like WMDC.exe (but if run it, nothing comes out)
if i recheck the properties of the icon on the start menu, there is no more target application, (you could call it broken link)
whats happenning
i went through the installation part of it,
http://www.pocketpcfaq.com/faqs/wmdc/install.htm
its exactly what happen with me,
but my side i reach the screen which shows "Installing device driver software"
then it failes after,
if i check the devices i find that it find a bluetooth device, but cannot install it correctly
Hi
I would like to ask You for real help, advise, suggestion what to do.
First of all I know I can make hard reset but it is not a solution for me - more important is data on this mobile than to use it.
Samsung I780, WM 6.5 with HTC TODAY (big clock, six tabs) with tasks, calendar and wireless plugin.
I wanted to add Resco today plugin. Installation without problem . Restart and my phone hangs - loading startup animation, bottom bar with soft keys and nothing else. It hangs in today screen loading moment and phone doesn't respond to anything. Tapping, keyboard, buttons - nothing.
When I'm pushing buttons for example left softkey with shortcut to contacts after restart - they will open, so means that system respond before loading today screen, but then it is loaded in background and system hangs
I tried to restart many times with power button, removing battery.Soft restart with hole on left side. I hoped that after keys combinations Fn + enter + power - to force upgrading state will help, green + red + power to prepare for hard restet will help. After restart it is the same. In all those situations windows 7 x64 mobile center or windows xp x64 active sync, windows xp active sync cannot connect with mobile. In case when I connect it by cabel and I turn phone on activesync is trying to make a connection but after one or two minutes the sync icon is grey and nothing happend. With SD or without - still the same.
I was trying to establish connection PC-mobile by Mirage soft.
Mobile doesn't respond (for sure because of today plugin)
The questions are:
1. is there a key combination to force startup to default theme without loosing data, clear startup without any theme, plugins?
2. is there a possibility to make an autorun file on SD card to overwrite today theme configuration file at startup?
3. is there a possibility to make any batch file which block theme loading or will change theme registry entries?
4. is there a possibility to force connection between mobile and PC to get data without from PC?
5. Do You, HACKING WINDOWS MOBILE GODS, have any idea how to recover data from this mobile ?
If You have any friend, who knows or who has I780, or who has huge knowledge about WM - please show him this post.
Admins - I know that this is inproper but if You could put this post to Windows Phone section - lots of users which have Windows Phone device had WM device. PLEASE
Thanks in advance.
Guinnesss
OK, I must ask...
When you connect your device to the computer, does the computer acknowledge it? (aka, does it beep, or does anything pop up?)
if so, if you dont already have it, download and install activesync. it will allow you to setup your windows mobile with the pc. now go to the activesync window, and click "Explore"
now you should be able to copy data off of your device, move data, and more.
hope i helped
Hi
As You can read in first post:
windows 7 x64 mobile center or windows xp x64 active sync, windows xp active sync cannot connect with mobile. In case when I connect it by cabel and I turn phone on activesync is trying to make a connection but after one or two minutes the sync icon is grey and nothing happend