I've uninstalled S2U2 because I'm running out of space.
I'm using a HTC DIAMOND P3700 and when I try to lock the device, as you can do before you install s2u2, the phone's screen goes black and instantly turns on again, so is completely useless, so this app let the unlock feature that HTC gives you by deafult unusable (I know it's not perfect or good looking, but I need it ).
¿Does anybody know how to restore my keybard and screen lock as it was by deafult? (Before installing S2U2).
Thank you in advance
Related
Can somebody please help me
My PDA vario 2 the touch screen have frozen and i can not use it
None of the bottons are working and at the moment it is lock and strugling to unlock.
Please help i have vital information on it
Thanks
Hi Babes,
I don't know much, but I do know that the sweet people on this forum would very much like to know a lot more details about your device before they will be able to tell you much.
Obviously you must have performed a soft reset.
My PDA Freezes
Hi Everyone,
I have T Mobile MDA Vario II and my problem is the screen touch on which i use my stylus stick to tap on is not working. When i tap anything on the screen non of the functions are working which means i can not use the phone to make call or get any information from it.
I will be happy if anybody can help me to solve it and i have tried things like resetting and trying to calibrate again.
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#softreset
try reading this
Hey dude
I have a HTC TyTN which i *think* is the same device. Basically its rubbish when it sleeps on its own. Don't let it turn its self off. Do it yourself. Kills 99% of all known "comas" (which is what its known as) and only requires a touch of the off button
SOrry, just to add:
have you tried the soft reset underneath by the slider switch where you sink it with usb? Stick a pen or pencil in and hold for a second. If all goes well you won't loose any info and it will restart. Then you can go into system and turn off autosleep.
hi, i am X1 user
i like s2u2 lock screen a lot
be4 that, i use Inesoft phone Answer system to pick up the phone, and use s2u2 to lock screen, but i found that have some conflict, since s2u2 1.x, when the phone was coming, but s2u2 lock screen was on that inesoft phone answer screen, so i can't use touch screen to answer, i have to use answer button of X1 to answer, so after that i change to use S2u2 answer system.
1.6x, when the phone is coming,then answer screen didn't show up or show up but touch screen can't work or answer screen show up with lock screen, but of course not always like that , sometime it works
2.01 when the phone is coming, touch screen can't work, sometimes lock screen showup with answer screen, but seems 2.02 fixed it?
POINT, 2.x , someitmes whole lock system crash or something, can't lock screen, when phone comes with no answer screen, i go to setting and click save again, the system show "S2U2 can't restart, plz restart ur device system"
after i restart my X1, and everything works fine
anyway to Fix this problem? if can't fix , anyway to fix lock system conliect with inesoft phone answer system?
After making soft reset at my HTC Touch Pro I seeonly black screen with banner "TOUCH PRO" in the middle an right bottom tehre are SPL version....
But nothing more, HTC don't start WM (version 6.1 installed) and also not possible to switch it off. Nothing elese is possible to do, only remove battery.
Could some one help, or there is only hard reset necessary?
fiskuss said:
After making soft reset at my HTC Touch Pro I seeonly black screen with banner "TOUCH PRO" in the middle an right bottom tehre are SPL version....
But nothing more, HTC don't start WM (version 6.1 installed) and also not possible to switch it off. Nothing elese is possible to do, only remove battery.
Could some one help, or there is only hard reset necessary?
Click to expand...
Click to collapse
Steps:
1) remove battery and see
2) if nothing, then hard reset...
3) if not able to, then place device into bootloader mode and flash using active sync
Hey guys, i've got a problem. First off, KforTouchPro works fine on my HTC Touch Pro, i can configure buttons fine for Morphgear, PocketGBA, SmartGear etc, it works wonderful. And as everyone that uses this app already knows, you have to switch the setting to MS IME before you launch your game emulator, or else you can't configure the keys. Well, my problem is, after i'm done playing a game, sometimes I forget to switch the setting back to default, and whenever i do a reset or shutoff my phone, it hangs at the screen right before it shows your homescreen and touchflo3d tabs.
Basically, for those that use EnergyROM, it hangs at the screen that shows you the black & blue background with the word EnergyROM 3.0 in the bottom left (or something like that, can't remember). That means you can't do anything at all, since there are no buttons etc for you to press as the home screen is not fully loaded, so basically you got a semi-bricked phone as no matter how many times i try to turn on the phone, it just hangs there, which results in me having to do a hard reset in the end.
To prevent this, you MUST restore the KforTouchPro setting back to the default setting, but sometimes ppl forget and this will cause a semi-bricked phone, which is very risky and quite dangerous.
So, is anyone else having the same problem as me?? Is there a solution to this??
And lastly, what's the difference between KforTouchPro and KforRaphael??
I just upgraded to windows mobile 6.5 on my htc touch dual. I don't know what happened, but now when my phone goes to sleep or i put it to sleep, when i turn it back on it's stuck in the lock because it will not let me slide the lock thing. I'm not sure why its doing this, but i also know that when i first turn my phone on from a reset or something, the first error is "quickdial cannot be opened. cannot find one or more components...." or whatever, then after that there is another error "touchflo is already running". is there anyway to view and disable the startup processes? i've searched all over and cannot find a way to view the startup processes. And this lock thing really sucks cause i have to keep rebooting evertime it goes to sleep. Thanks in advance!