I just upgraded to windows mobile 6.5 on my htc touch dual. I don't know what happened, but now when my phone goes to sleep or i put it to sleep, when i turn it back on it's stuck in the lock because it will not let me slide the lock thing. I'm not sure why its doing this, but i also know that when i first turn my phone on from a reset or something, the first error is "quickdial cannot be opened. cannot find one or more components...." or whatever, then after that there is another error "touchflo is already running". is there anyway to view and disable the startup processes? i've searched all over and cannot find a way to view the startup processes. And this lock thing really sucks cause i have to keep rebooting evertime it goes to sleep. Thanks in advance!
Related
I have the following little problem with WM6. Every time i press the "power button" on my device, WM6 returns to the today screen. What i really want is, that it stays in the last application which was open before i switched the device off.
This behavior is especially annoying when i use tools like "ScreenOff" which does nothing else but turns the screen off (the programs are running further). This is useful when it comes to mp3 listening or something like that. But when i press the power button to turn the screen on again there is no mp3 playing application but the today screen.
Can anyone tell me where to change that behavior?
whats the today timeout set to in settings->today->items ?
It is activated and set to 8hr.
You need to disable the password lock in Security settings. This will mean that a password will NOT be required to unlock the phone upon restart or after the pre-determined timeout.
With the password lock disabled, every time you power up your phone, it will be at the last application you had open.
I already have the password lock disabled. So that can not be the problem.
If you are using the today screen battery meter there is an option for it to do that. Annoyed the hell out of me till I disabled it.
Thank you, thank you!!!
You made my day
hi, i am X1 user
i like s2u2 lock screen a lot
be4 that, i use Inesoft phone Answer system to pick up the phone, and use s2u2 to lock screen, but i found that have some conflict, since s2u2 1.x, when the phone was coming, but s2u2 lock screen was on that inesoft phone answer screen, so i can't use touch screen to answer, i have to use answer button of X1 to answer, so after that i change to use S2u2 answer system.
1.6x, when the phone is coming,then answer screen didn't show up or show up but touch screen can't work or answer screen show up with lock screen, but of course not always like that , sometime it works
2.01 when the phone is coming, touch screen can't work, sometimes lock screen showup with answer screen, but seems 2.02 fixed it?
POINT, 2.x , someitmes whole lock system crash or something, can't lock screen, when phone comes with no answer screen, i go to setting and click save again, the system show "S2U2 can't restart, plz restart ur device system"
after i restart my X1, and everything works fine
anyway to Fix this problem? if can't fix , anyway to fix lock system conliect with inesoft phone answer system?
I do not have auto lock turned on. I did load the VZW "clean up" cab. I can't figure out why sometime when I pick up the phone the lock is on, and other times the screen is simply turned off. I never hit lock, simply turn off screen or let it go off automatically.
Anyone have an idea?
Thanks.
Are you sure you are not hitting the top button accidentally. That button will turn off the screen.
I do use the top button. It only turns off the screen though, not locks the device. I can use it, then hit it again minutes later and the device is fine. But sometimes I'll put the phone down or aside for a while, and when I pick it up to answer a call or something I'll find it has locked itself and I have to press the soft keys.
hmm... sounds strange, I gotta go with what the 2nd guy said, I will sometimes lock the device myself (the soft key for it is on the home screen after all and it's VERY sensitive). About the screen turning off, you sure it's not just going into it's timed sleep/standby mode?
hopefully this will be of some help...i too had this problem and then i realized what the cause of MY problem was...whenever i would receive a phone call and would let it go to voicemail, when i would wake the phone back up it would be locked...i cant remember if the same thing happened when i answered the call but i know for sure it would do it when i pressed ignore call or mute ringer and let it go to voicemail...SOLUTION:i downloaded a cab called disable auto lock (or sumthing like that) and it fixed the problem...hopefully that helps..
mwrood said:
hopefully this will be of some help...i too had this problem and then i realized what the cause of MY problem was...whenever i would receive a phone call and would let it go to voicemail, when i would wake the phone back up it would be locked...i cant remember if the same thing happened when i answered the call but i know for sure it would do it when i pressed ignore call or mute ringer and let it go to voicemail...SOLUTION:i downloaded a cab called disable auto lock (or sumthing like that) and it fixed the problem...hopefully that helps..
Click to expand...
Click to collapse
I've been trying to figure this out as well and came to the same conclusion. My screen is off, I answer a call, and when I hangup my screen is locked. I did a quick google search for disable auto lock and didn't have much luck. Can you post the name of the file and where you got it? Thanks
Not sure where I found it, I think PCGeeks, but it was called Disable_Auto_device_lock.cab
HOWEVER...it did not work for me. I may have to cold reboot (from scratch) as I've tried so many different cabs, things are getting messed up. I'm trying to hold off for the ROM update.
The phone will automatically lock if you miss a call. Sometimes if you pick up on the last ring the phone will consider it a missed call and still lock the phone. That has happened on my 6700, my 6800 and now my TP2, but this is the first phone that locks after a missed call. I actually like it becuase since I dont have a S2U2 or 6.5 on the phone it prevents butt dialing if I leave my phone in my pocket or soemthing.
I have noticed the same issue. I also noticed that it did not happen before I had installed the clean up cab. I had thought that the lock button was being hit while the phone was in my pocket.
Although the "Disable auto..." didn't work for me, I down loaded and am trying S2U2. So far, and if I'm not mistake, It did not lock me after a missed call, or answering a call.
I'm going to play with it for a while. Had something similar before on my old Q9c so if it works, great!
I just hope all these friggin cabs work when I update to 6.5, or I may not! The only real pet peeve I have about the TP2 is earpiece volume. If the cab volume booster doesn't work, I won't upgdate!
I have this issue as well. It seems to lock if the person that calls me hangs up before I do. It also locks if I ignore a call. I have had it lock in the middle of a call as well. Really annoying if I need to use the onscreen keyboard to enter information during the call.
I hope someone can find a solution for this. So far, it's my only complaint about this phone.
Well, I've been using S2U2 now for a couple of days. Getting to like it! My screen no longer locks, and I kind of like the Iphone type unlock. When a call comes in 2 nice large buttons for either answer, or end (ignore).
You may want to try it.
Mine does the occasional random lock also and when it does, it wants a password that does not exist. IF anyone knows what the standard password is, please let me know. I don't have one set and need to reboot when this happens. Really my only beef with the phone which hopefully gets fixed in 6.5
I have found that if I receive an SMS the screen will come on on its own. In those circumstances I have seen it lock the screen afterwards.
I am thinking it is a failsafe put into the phone for accidental button hits after the phone wakes up from certain activity but could be in a pocket.
I have been looking around the forum and the register editor to find any solution for my problem, which is:
Everytime my phone goes to stand by and I turn the screen back on and unlock it, it shows manila's home (today screen), and i want it to show the last window or program I was using.
For example using G-remote, I'm controlling my PC and I leave it for a while.. it locks by itself after some time and goes to stand by, so when I unlock it I have to open G-remote again from the taskbar, I want to change that but what butters me the most is that G-remote sometimes fails connecting after that, something that didnt happen if it opened right again from the lockscreen.
Please help me..
Things ive been noticing:
-The today timeout option doesnt work, no matter if it is disabled or set with a very long time, it always brings me back to the today screen
-If i lock the screen manually (start menu->lock) this doesn't happen, it only happens if i let it or make it go to stand by
-There is another thread about something like this on a touch pro but a lil bit different, my device goes to today screen even if touchflo is disabled, the one on the other thread didn't, so it's a windows registry issue of today's timeout.. i guess...
I know i wasn't the only one with this problem so i'm going to post the fix here:
I installed the Smartlock 2.0F and disabled the Autodevicelockenable (0).
So here's the link to the thread with the cab that fixed it and i hope people with this problem find this or that post.
Hello everyone.
I have a couple of problem with my xperia Z3. The problem is that when i press the side button to lock the phone, the phone get locked but the screen seems to be still on(and then turn completely off after a few seconds) . I mean that even if the phone is locked it's like i am seeing a completely black image. This doesn't always happens with Android KitKat but with the Lollipop upgrade i made yesterday flashing a generic Baltic firmware, the problem got worse! When it happens the screen stays on even after few seconds and it doesn't turn off and i'm forced to restart the phone to "solve" the problem. If it helps, when the phone locks fine the screen turns off immediatly but when the phone has this problem when i press the lock button i can see for a moment the screen locked, with the clock, the padlock icon, the fast dial icon and the fast camera icon ecc and then the screen turn black(but still on) like "something is slowing/blocking the phone from getting locked"
The second problem that i have is that sometimes when i make a call or recieve one when i put the phone to my ear the screen doesn't turn off and the tousch screen still works making me end the call unintentionally touching the screen with my ear for example. I haven't had this problem yet with Lollipop, but I used to have it with KitKat. Anyway this is the less important problem that i'd like to solve because even if the phone should work proprely by itself i can always accept the call and then lock the screen with the side button "solving" the problem of unintentionally ended calls. But the first problem really bothers me a lot and i'd really like to know how to solve it.
Does anyone have at least one of this two problems and knows how to solve them? Thank you !
I'm sorry for my english and i hope i've explained myself well. I've just restarted the phone so the problem at the moment doesn't persist but the next time it will happend i will make a short video to make you see exactly what happens or if you think that this two problem could be caused by an app just tell me and I will write you a list off the app that i've installed.
**Edit: I'm really sorry, i haven't read that this was the wrong section for questions, could someone move it to the right one? Thanks.
screen doesnt turn off after locked
Hi
After the upgrade, my screen also remains on, still lit after screen is locked. Pls help
I had the same problem. And got it fixed by disable and enable "adaptive brightness" .
elli said:
I had the same problem. And got it fixed by disable and enable "adaptive brightness" .
Click to expand...
Click to collapse
It worked! Thank you so much.