Database Info

how to flash tilt via sd card

First of i have looked in many thred but could not get my answer so I posting this.
I was on dutty's new wm6.1 rom but with radio 1.64 but due to constant freezing and gps issue i decided to go back wm 6.0. so i flash my tilt with Duttys Dualtouch v4 RTM.7. everything went ok but now issue is I can not reboot my phone. I after setting up date etc. customisation started and then soft reset. after that soft reset my tilt just hang at dutty's series screen does not go any further. I have tried hard rest, soft rest , going to three color screen and amny other that i can think of but every time i hang (htc log in center, hTc word in middle and dutty's series at right buttom screen). I waited for long time in that case phone goes into blank screen and when i press power it show me some wired screen with many colored dots. ( it that waht called I bricked my tilt). Is there any way to flash tilt via sd card? I show few thread on this site but they are for different brands phone. if there is a way can some one tell me how?

Reset to three color screen with USB
Hit reset, camera and power button all at a time, you will see the three color screen, put your usb port and flash with old rom. That's it....

v3patel said:
First of i have looked in many thred but could not get my answer so I posting this.
I was on dutty's new wm6.1 rom but with radio 1.64 but due to constant freezing and gps issue i decided to go back wm 6.0. so i flash my tilt with Duttys Dualtouch v4 RTM.7. everything went ok but now issue is I can not reboot my phone. I after setting up date etc. customisation started and then soft reset. after that soft reset my tilt just hang at dutty's series screen does not go any further. I have tried hard rest, soft rest , going to three color screen and amny other that i can think of but every time i hang (htc log in center, hTc word in middle and dutty's series at right buttom screen). I waited for long time in that case phone goes into blank screen and when i press power it show me some wired screen with many colored dots. ( it that waht called I bricked my tilt). Is there any way to flash tilt via sd card? I show few thread on this site but they are for different brands phone. if there is a way can some one tell me how?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=336158
the procedure is in there

thank you for quick answer.
it worked I know i can always coutn on you. Once agin thanks

v3patel said:
it worked I know i can always coutn on you. Once agin thanks
Click to expand...
Click to collapse
LOL....should have flashed the radio first
Like the other person said...go the boot loader (aka tri color screen) and install a compatible WM6 Radio.

Khanki said:
Hit reset, camera and power button all at a time, you will see the three color screen, put your usb port and flash with old rom. That's it....
Click to expand...
Click to collapse
THK THK THK!!!!!!

Help - Orbit 2 / HTC home crashing problem

Hi
I've had my orbit 2 for a while now using the o2 software and I thought today I would try and install HTC home to see what all the fuss is about!
I downloaded the cab and installed it but now my orbit 2 crashes on start up!
When I turn it on I get the blue o2 welcome screen, the green windowms mobil 6.1 screen then it loads. The o2 smart bar is still there and the two screen buttons say calander and contacts (as its always been).
Those buttons then change to phone and menu I believe and the phone crashes!
How do do a factory reset the phone without being able to turn it on?

Update: It appears I can access the phone when its plugged into my pc, but as the phone crashes sometimes!
Help!!!!

press the two hardware phone keys together and then, while holding
them pressed, softreset with the pen. A message should appear on
the screen, that you will lose all personal data. Press green button
to confirm and phone will HARDRESET...
Good luck,
Olioaglio

Are you using the right cab file?
Hi,
I have an Orbit 2 and have no problems with my 6 tab HTC home file.
You do need to take care which version you are using though.
The cab file I have and which I know does work is:
HTC.Kaiser.Home.Eng.0409.6Tab.sch
Instead of hard resetting your orbit 2, just remove the cab file you're using and install the cab file I list above and which you should find by doing a search of this site. Then do a soft reset and it should be fine.

Not able to Hard Reset

I have a HTC Touch Cruise. First it stoped to avtive sync with the computer but i didn't worry, now the touch screen doen't work, it doen't hard reset nor does it go to the boot loader mode even though i have a hard SPL. The phone as of now can only answer calls and dial the last number.. otherwise i'm not able to do anything as the touch screen is nor functional... is there any solution to hard reset this machine as i'm not able to do it the standard way....

Try pressing 2 buttons below green (phone) & red (hangup) buttons,both at the same time & hold it while pressing reset button with the stylus.
That is another way to Hard Reset

Same here bud.
vishant said:
I have a HTC Touch Cruise. First it stoped to avtive sync with the computer but i didn't worry, now the touch screen doen't work, it doen't hard reset nor does it go to the boot loader mode even though i have a hard SPL. The phone as of now can only answer calls and dial the last number.. otherwise i'm not able to do anything as the touch screen is nor functional... is there any solution to hard reset this machine as i'm not able to do it the standard way....
Click to expand...
Click to collapse
Mine has just doen exactly the same thing and I couldn't hard reset either. Lukily for me I have insurance so its gone of to be replaced.
But i tried everything right down to desktop remote but you still need to tap the screen at some point
Sorry this may not have been much help but I just felt you had to know your not alone mate

mavisdavis said:
Mine has just doen exactly the same thing and I couldn't hard reset either. Lukily for me I have insurance so its gone of to be replaced.
But i tried everything right down to desktop remote but you still need to tap the screen at some point
Sorry this may not have been much help but I just felt you had to know your not alone mate
Click to expand...
Click to collapse
Using my trick,you don't have to tap the screen at all

d4rkkn16ht said:
Using my trick,you don't have to tap the screen at all
Click to expand...
Click to collapse
yes. You can hard reset manually by pressing down both GPS and Internet explorer button while soft reset the polaris. this will do the hard reset.

Undo activated unlock screen in WM 6.5.

Since yesterday I have the following problem:
When I touch the buttons of my HTC Diamond Touch 2 (WM 6.5) an unlock screen appears.
Yesterday I configured a new mail account, and in the confusion I also activated the unlock screen.
The box “prompt if phone in unused for” is gray instead of black so I can’t remove it.
I want to unlock my phone with the slider as I used to do.
Who knows the solution for my problem???
John.

try a soft reset
cheers, stephan

Soft reset sounds horrifying for me.
Can you tell what will be lost with a soft reset?
How can I soft reset my WM 6.5?
John

Tried soft reset, no result, still this stupid password unlock screen...
I want my unlock slider back, i want to be the boss over my own phone.
Does somebody now a solution other than hard reset?
John.

do you have any additonal software installed on your device that may modify the lock settings? If not, I have a feeling you have to go to settings> security>phone lock and uncheck the box that says "prompt if phone unused for" Hope it helps.

[Q] After soft reset HTC Touch pro dead

After making soft reset at my HTC Touch Pro I seeonly black screen with banner "TOUCH PRO" ....
But nothing more, HTC don't start WM (version 6.5 installed) and also not possible to switch it off. Nothing elese is possible to do, only remove battery.
Could some one help.
I remove batteri and restart hard.

Plz help me