Related
I did the Hard-SPL and followed the instructions to a T. The phone rebooted after the hards-spl and everything worked fine. I installed BlackBerry Connect to my device and it rebooted. Now it just sits at the windows mobile screen and won't proceed any farther. Anybody have an idea why? Or what I can do to get it working again? I did the HardSPL using windows XP and not vista.
When I enter the bootload this is what I get.
KAIS*0 MFG
SPL-1.0.OliPof
CPLD-8
Serial
Please help.
Anybody have any ideas?
Go to the wiki and look up how to flash from a microSD card, then flash a clean copy of whatever rom you had put on there so you can get a fresh start. Unless something is physically broken with the phone, that will save it. Saved me plenty of times.
Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
hold the left and right soft keys while pressing the reset button simutaneously for 5 seconds.
alltheway said:
Just had to do a hard reset. Fixed the problem. Loaded new HTC ROM everything is up and running.
Click to expand...
Click to collapse
congrats, glad u fixed it.
what new htc rom
Thanks! That worked! Now to reinstall BB Connect on the device not the SD card. . .
rbryant said:
How did you do the hard reset? I can't even get it to work. (hold right & left soft keys and press/release reset until some screen I never get)
Click to expand...
Click to collapse
continue holding the left/right soft key after you put the stylus to reset, and the extra screen will show up.
can i hard reset by doing the clear storage thing?
gula187 said:
can i hard reset by doing the clear storage thing?
Click to expand...
Click to collapse
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.
P1Tater said:
no, u have to do the left & right soft keys and reset all at the same time for 5 secs. thats the only way i know of to do a hard reset.
Click to expand...
Click to collapse
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it
all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.
Yep, you cannot install the BB connect software to the SD card & then reset. Your device will be looking for the BB connect software before the device SD card has booted & come online.
HOWEVER,
with SK Tools you can go into the startup folder & reorder the start up files. If you move BB Connect down to the end of the start up sequence it might work. Well, it did for me. Ylu have to go in after installing though, & before the reset & change the start up sequence down so that it's the last item to auto start.
You will have this type of problem with any program you install to the SD card where the program has a higher priority auto start because as I said before, you have an item trying to boot before it's operating files are available. Therefore, you stop the whole boot sequence because it can't move on to the next start up item without finding the start item it's looking for.
AS for the Hard reset. I find the easiest way to do this is:
1. Soft Reset.
2. while the device is soft resetting depress both soft keys.
3. When you get to the first boot screen depress the soft reset key & hold while simultaneously holding the soft keys.
4. follow the instructions on the screen, i.e. push send (green phone button) to restore, etc...
Works every time for me.
P1Tater said:
all 3 actions must be at the same time and hold for 5 secs. if you get the short vibrate, just keep trying over and over. it wont hurt anything. at least it never did to mine.
Click to expand...
Click to collapse
This is not random!
When I press:
RightSoft + LeftSoft it always works.
LeftSoft + RightSoft it never works.
Sequence is important. Not sure if it is left or right first though.
If other can confirm, could someone put it in the wiki, please. I've pulled a lot of hair over this topic.
gula187 said:
i held the cam.+ power button and held the reset button and its doin the same thing it does when i soft reset it
Click to expand...
Click to collapse
that is to enter BootLoader NOT to start a Hard reset. when holding the power AND the camera button then resetting using the stlyus you should see the tri-color screen listing your SPL, Kaiser model, and one more thing i forget right now
EDIT - Make sure you are not pressing the ok button while going into BootLoader as the way the buttons are laied out its easy to press the ok by mistake.
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Did you do anything to the phone, in terms of modification? I was really interested in that thing, but having to do a hard reset on a brand new phone is a little disconcerting...
I tried installed everything that i had on my touch cruise
and everything was working superb.
Then this morning i installed HTC Home Plugin v2.1
and that hung my phone after i restart.
Now i've got no way on getting pass bootup screen.
A google search of "hard reset omnia" yielded this.
http://asia.cnet.com/reviews/handhelds/0,3800005395,39470096-43574745p,00.htm
26th June 2008: Was advised by the customer service rep (CSR) on the phone that the only way to solve my hanging issue is to bring to your Customer Service Center for a firmware software reinstallation.
Click to expand...
Click to collapse
Sorry to be the bearer of bad news
edit: http://forums.hardwarezone.com.sg/showpost.php?p=31024391&postcount=59 Try the method here.
when was onmia out ???? can you post some pics of the device ??? thanks i needreal shots not the ones that are online!
outphase said:
A google search of "hard reset omnia" yielded this.
http://asia.cnet.com/reviews/handhelds/0,3800005395,39470096-43574745p,00.htm
Sorry to be the bearer of bad news
edit: http://forums.hardwarezone.com.sg/showpost.php?p=31024391&postcount=59 Try the method here.
Click to expand...
Click to collapse
How awfully true..
Just got back from the service centre at Plaza Singapura.
Yup. Upgrade of software was the way to go.
The lady did say that the hard reset was the same as HTC,
pressing of the call and end button thingy but mine couldn't work.
Anyway, it was silly of me to go install the HTC Home Plugin.
Thx anyway bros for all replies..
Omnia Rocks!!
C J said:
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Click to expand...
Click to collapse
tap the soft reset button on top of the device using a thick stylus, you will get back the boot screen.
follow this
do the soft reset and immediately press the two green and red buttons(send and end keys)
you will get a hard reset menu on scree
Hello
Isn't posible reset the Omnia?
My wifi don't work
C J said:
Does anyone know how to reset a Samsung Omnia?
Mine's stuck at bootup and i cun press anything.
I need to know if there's a series of button presses b4 poking
with the stylus to hard reset the phone to factory settings.
Thx in advance.
Click to expand...
Click to collapse
turn your phone off, than press red and green buttons and after press phone on, you will get 2 options, 1 format: press phone on, 2 cancel: press phone off, in italy omnia this procedure is working.
It works man!!
Eureka!
Yes it does 2 x's now and one after a firmware update to version i900DXHK3/DXHK3 (Singapore). Which I did earlier today.
I had some how managed to put a pass I could not get right (how who knows).
After several attempts and finally an 8 min. mandatory wait. I did it. My final solution was that I had to wait and keep device awake for time to pass. 8 long agonizing minutes~!
1. Wait till reset timer is elapsed and devices is awake.
2. press both call and end button (ie green and red) I didn't press too light or hard just normal.
3. Push stylus on soft reset and within 5-8 secs eureka format screen.
4. hit call button.
This may not help every one but those with pass problems mab.
Help! I cannot hard reset after my touch screen stopped working. Have tried pressinn gps and internet buttons, then pressing reset and keeping hold of gps and internet but device just soft resets. Would leaving the battery out do the same thing?
Alternative hard reset
Hello mate,
You say your screen isn't working but can you still use the keys and scroll wheel to navigate around the software?
If so, open the start menu and navigate to 'settings', 'system' and select 'clear storage'.
Make sure that you've removed your SD card before you do this.
It will perform a hard reset for you.
Lom
I'll try it but I think it asks you to input 1234, which I can't do without the keypad working!
Yes you do have to enter 1234 so I am totally stuck and ready to try the big hammer reset.
Can anyone help?
alternative!!
use my mobiler
this application will let u use ur ppc thru ur pc
i mean u can share n control ur ppc screen thru desktop
link
http://www.mtux.com/
Cheers Mate!
Tried what you suggested but i got a message on the screen with a yes no box to install and couldn't get the button to operate using the wheel or any hardware key!
I've put my sim card in my magician and I think I may have to send the polaris back. Bet they'll say its my fault and will want paying to fix it.
I'm going to try leaving the battery out for a while to see if that will "force" a hard reset. I know I havent bashed it as it stopped working just after a phone call which is why I think hard resetting will sort it.
Tried your suggestion on my magician: nice bit of software!
The hard reset prompt is done by the bootloader, no installed software can affect it, simply because it isn't loaded yet.
Anyway, for the unlikely case of the digitizer hardware not being reset by bootloader, try removing the battery instead of pressing the reset button. Yes, thats right, remove the battery while the unit is operating, as rude as it sounds, and reinsert it while holding the GPS + Internet buttons.
It will, of course, prompt you to enter the 1234, but the touch screen should be initialized by the bootloader. If it still wont work - RMA the unit, your digitizer is faulty.
It still wouldnt hard reset so it probably is a hardware fault. looks like its going back.
Anyone else had a similar issue?:
Sent it back to HTC in Milton Keynes where thet diagnosed a duff touchscreen and replaced it under warranty. The service was very fast and hassle free. Well done HTC!
First thing I did after sprite restore (they reload with a fresh ROM) was to install my mobiler as suggested above. No worries if the screen doesn't work now.
Thanks for your help guys!
Hi all,
Perhpas this has been answered before, but I couldn´t find any related thread.
My Rapahel is turned on but can´t see anything on the screen! is totally black.
I know it´s turned on because I can up or down the volume key and I hear the sound and feel the vibrate.
Yesterday was ok, nothing new installed but today I just pressed the power button and nothing!!
This happened me before on Universal, problem was that in some way the phone change itself the brightness to cero.
If I conect to wall charger nothing happens also, not any sign that device is charging.
But still can see something. Now on my Rapahel I cant see anything?
Any help would be much than apreciated please!!
Thanks,
I would
1 softreset
2 hardreset
3 rma
Rudegar said:
I would
1 softreset
2 hardreset
3 rma
Click to expand...
Click to collapse
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Hey masters!
A light would be great here!
Sorry to insist!
orb3000 said:
thnaks,
soft reset done: nothing
hard reset done: nothing
sorry, what is rma?
Any other advice?
help please!
Click to expand...
Click to collapse
Not a master, but still try to help:
What happend during the soft or hardreset, is the screen showing during the booting ?
How did u do the hardreset, by holding keys ?
After the hardreset u have to get the screen aligned how did u get after that point ?
Help!
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
orb3000 said:
Ok this is what I did:
When sof reset not any screen was appearing during the process.
Yes tryed the hard reset presing volume down the center button and the hole behind the charging usb and nothing happened
Snince then I can just hear the sound but nothing on the screen at all
Thanks for any advice!
Click to expand...
Click to collapse
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.
1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Hard reset (option 3)
1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)
1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)
Click to expand...
Click to collapse
Ok this is out of the wiki, u see that all methods let u press the vol up button to really start the hard reset than. So on either method do the key presses, wait a while and then press the vol up to start the process.
Its a little try and error because u are not seeing the the actual message to press the vol up. but mybe thats worth to try until u get the point. I think option 3 is a good and easy one.
hopefully the hardreset works, maybe u can try to take a torch or bright sun light to get the display information, if the display itself is not broke u should see a slight shadow of what is written on the display. I had that problem with my wifes phone once and the information was the but its not a reflective display so it was very faint to see.
Finally tho, if all that fails:
RMA = Return merchandise authorization
It means a warrenty return.
It sounds to me like the lcd has croaked. If you dont have suitable warrenty / insurance i'd suggest ebay! i've just found a screen & digitiser for less than £25 (thats for a Raph 100, i honestly dont know if parts are the same on different raph models but i suspect they are)
Good luck!
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
orb3000 said:
Thanks a lot guys but nothing worked
I cant do any hard reset option but sound stills hearing perfect
I can understand why one day was perfect and next no screen!!
Can anyone confirm that the LCD Display+Touch Screen For HTC Touch Pro T7272 form the last link will work on my At&t version?
Any other advice?
Thanks in advance
Click to expand...
Click to collapse
Sorry to hear that nothing worked.
Not shure but if the phone fails to hard reset it is not only the screen that is broken ! Take this into account, do u still have warranty, maybe it is better so exchange the whole phone.
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
orb3000 said:
Well that is the problem
I live in other country so warranty is not valid here, and there is not a single place where I can take it to repair here
Very strange as one day was perfect ant the next day no screen!!
I took the battery out and then place it again, all works normal, it starts (vibrations feels) then nothing!, I know its turned on because I can move volume up or down and I hear the sound and vibration, if open the keyboard not any light turns on on it.
I´ll wait patient till some member can recomend more options in order to make it work again.
I´m so frustrated...
Thanks anyway for your kind help!
Click to expand...
Click to collapse
Dont give up, hope that I not get on ur nerves. But still I think a hard reset must be possible.
When u turn ur device of how do you do that ? When u turn it OFF with the power button you have to answer a question on the screen, u do not see the question but is the touchscreen working or how do you know where the YES/NO field is ??
So another way is take the batt out, and when u insert the batt than turn it on with one of the mentioned hardreset procedures.
There is than a question also but this is answered with the Volume UP button.
Maybe u need a second person for helping with the buttons,
The hardreset must be possible somehow, it cant be a broken touchpro
OK I tried with my phone and procedure 1.
VOL DOWN and CENTER with Phone ON
Then Push RESET with the Stylus and hold all three until:
After 5 seconds the Bootscreen showed, after that the message to press VOL UP for Restore.
You do not see the boot screen but just wait the time
You are so kind my friend!
I have tested all the hard reset options but none seems to work
Aparently I can´t do a hard reset
as every time I follow any process and wait 5 sec, then press vol up and it seems that nothing has happened, not even a soft reset!
Pressed center button and vol down, then press the rest button located behind the usb port (the one with a symbol for headphones....)
But nothing happens.
I´lll upload a small video with me doing the process, hope it helps in anyway
Here the link of the video I took with my problem
https://www.yousendit.com/download/ZW9DQ3QxeWFEbUx2Wmc9PQ
Hope this helps in any clue to solve my mysterious problem
Thanks a lot!!
Ok will wait for the video.
Inbetween another option, did u try to flash the ROM.
Can u get a rom to download from ur provider, to do so ?
After the flash the device more or less does a hardreset.
Update:
saw the video, it seems that the phone is not reacting to the center or the reset button. Because when u push reset, even if it is not in hardreset mode, it should do a soft reset right away.
But ur phone is straight reacting to the Vol keys, very strange.
Is the mentioned ROM update an option ??
What is the reaction when u hock the phone to the pc, is active sync working ?
Do you see the internal memory of the phone ?
Remove the SIM and any memory card, maybe they are causing trouble ?
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
orb3000 said:
Exactly, Raphael is not reacting to a hard reset and dont know why?
I´ll keep trying all methods.
Yes, I´ll try to reflash to the original AT&T ROM for Fuze tomorrow as today I am not close to a computer.
If you have any link for that mentioned ROM would be great, if not no problem I´ll find it.
Once again thanks a lot and I´ll keep looking this thread in case someone else have another recommendation
Cheers,
Click to expand...
Click to collapse
Here ya go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
Take the one matching ur cell phone. Check the thread links for more Info.
Thanks, downloading
Tomorrow I´ll try to reflash and post results later
Cheers,
(Anyone? another idea?)
UPDTATE: I conected raphael to my computer and using pocket controller I can see that all is working ok inside but nothing on the screen, or keyboard lights.
I´ll try to hard reset now...
Hope this can help in order to solve my problem
Thanks
Attached the picture
UPDATE 2: I performed the wipe data from the device, this must be exactly as a hard reset I pressume, and nothing....
So now is there anything I can check to see if there is something loose in the connection from device to screen?
Any recommendations on how to do this?
signal from device working perfect simply does not come to screen or even to turn on light on keyboard
Any help is GREATLY apreciated!!!
What rom did you have? I had a similar problem and just had to rma it.
This is the craziest issue.. My slide to unlock is no longer working so therefore I can hardly use the phone except that I can take inbound calls. I have tried to factory reset using down volume, circle, reset. Please please please any other ideas are greatly appreciated! I am totally stuck with a useless phone and am having to use a BJ II for now! Uggh!
How come the hard reset didn't work? You need to hold down vol down and the dpad button until the tri-color screen appears.
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Beats the heck out of me.. I hold the volume button down, and hold down the dpad and nothing. I have done it on reboot, I have done it from the lock screen and nothing. As for your registry idea I like it, its just too bad I cannot get the phone to connect to windows. I have tried it on 2 Windows 7computers now. Anymore ideas?
You need to figure out how to hard reset-you're clearly doing it wrong. Hold down vol-down and the d-pad button simultaneously. Keep holding them down. Then just soft reset. Don't hold down the soft reset-just tap it with the stylus. Wait until the hard reset screen appears, then let go of the other two buttons. There is really no way that it won't work, it's a bootloader operation and it doesn't matter what crap you have on your main memory.
I'm having the same issue. Just flashed the Energy Rom and now I can't unlock my phone. I'll try some of the suggested tips and let you know which worked.
Farmer Ted said:
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Click to expand...
Click to collapse
I edited the registry with the above value and it solved my problem - Phone is no longer locked on bootup. Now my issue is that somehow my touchscreen is unresponsive (probably why I couldn't unlock my phone). I believe it's a hardware issue not a software one because it looks like liquid got under the screen somehow. Lame. Now I need to flash back to stock ROM and lock it so I can send it in under insurance.