Database Info

wrong rom update

After I mistakelt upgrade my s200 with a Kjam rom, the device will not turn on again, now I need to boot from the sd card has anyone an OS backup which work on Sd card?
I ll try to alive the device from sd card but I dont know how I copy the os to the sd card.

Do you have the bootloader alive?

thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.

laleyandasvivenporsiempre said:
thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.
Click to expand...
Click to collapse
AFAIK, it means that your battery is empty. Try to charge the battery with any working S200/100/110/9100 and you will be able to run the bootloader, then you will restore the device. Correct me, if I wrong.

the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...

laleyandasvivenporsiempre said:
the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...
Click to expand...
Click to collapse
This behaviour is typicel for a device with both broken image and discharged battery. The battery WAS at 100%, but the Prophet does not charge it if has no working OS, so the batery was drained until you tryed to reanimate the device. Ensure that the pattery is full with other, working device.

Walker;
I charge the battery with an other prophet I ll wait untill the light become green and battery is 100% then after when I tried with the boken prophet it did not reanimate the device. it is very interesting to see that wizard could work with prohet's rom but not vice versa

Flash wrong ROM consequences
Let me relate my experiences; exactly the same problem.
Update KJAM rom on DOPOD 818Pro ... Damn phone could not power on at all, at most on bootloader, plugin USB cable --> no USB word displayed at bottom.
Try to flash any RUU also no go ...
ON battery, could not power up at all, only plug in wall charger then managed to get to bootloader ... so all was lost.
Send to EBAY (where i bought from) and they flash the bloody Dopod 830 ROM..
During collection, plugin my own battery, same cannot power up... evidently the flash to Kjam killed my battery too !
The good thing was that with the 830 rom, my IPL became 2.16 (from 1.00).
So i reflashed to Dopod latest 2.15 ROM ok... further flash to AKU 2.3 hacked ROM also no problem.
SO, ultimately the cause was a killed battery from the ROM update.
Use a meter to measure contact pt 1 & 2 from top edge of battery, (supposed to be min 4.7V) I believe it's 0V or totally shorted out.
This battery cannot power on the phone, but still can be used as spare battery by power up with wall charger first, the battery still has it's 3.7V available to sustain operation.
So u can go buy a new battery and Flash to the correct ROM now.
Good Luck

to buyaoxiao;
Thanks for your comments but;
I think there is something more serious than the battery; I have two prophets, and I also try with the other's battery and still nothing happened, more than that, both of the batteries work with the non-broken prophet.

Flash wrong ROM
Hmm.. that may be true also.
I cannot really conclude as i was lucky the ebay shop i bought from agree to flash my S200.. i believed they had some trouble too as it took them a week to get it to Dopod 830 rom ... when normally they say 1 day will do. They refused to go into specifics though... (afraid that i demand for 1-1 exchange)

I have had the same problem, so that's why I decide to sent to dealer to try to fix it. Now I'm expect to have a call to pick it up. Hope they can improve my prophet to the new chip G4.
I tryed several times, hours to fix it, but no way. Sorry I can not tell you something good.

I am sure that there should be a way to fix those devices Jtag should not be the only way( if it really works) it is meaningless to loose a device only because of a wrong rom update

HELP!!!Impossible to charge the battery,permanent RED Led

As i said on the title,suddenly i couldn't recharge my Universal anymore,yes i've tried with a brend new official battery as well but everything was in vain.As soon as i plug my charge to my Universal it appear a Red Led and after 3 min or so the led turn off and so the battery.
How can i fix this problem?!
Is there any chance?!
Is it really dead like that?!
Please HHHHHHHEEEEEEEEELLLLLLLPPPPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!

If the battery is really brand new, then I guess the connectors might be damaged or the internal power buses might be broken somewhere. Have you dropped your device recently? Or did anything that might explain broken connectors or internal buses?

Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN

tetsuokaneda said:
Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN
Click to expand...
Click to collapse
It can be a software error. Have you tried hard resetting or installing another ROM?

tnyynt said:
It can be a software error. Have you tried hard resetting or installing another ROM?
Click to expand...
Click to collapse
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!

tetsuokaneda said:
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!
Click to expand...
Click to collapse
Your battery is fine, unfortunately your device broke

Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...

mzalan said:
Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...
Click to expand...
Click to collapse
I wanna die!!!I'm completely Fu.. up!!!
What a terrible news!I can't believe it!!!!
If i'll bring my phone to the assistant i'm gonna pay alot of money,at least 200.00 euro!!!!

similar problem
i had the exact same thing happen to my EXEC when i got 2 new batteries for it. One was a standard sized, pretty much the same as the stock one that came with the phone and one was a much larger capacity one that needs an extra cover for the back.
Id been using the device for ages on this huge battery and the charge said 100% constantly. then the device turned itself off and it wouldnt come back on. upon connecting the charger the LED was red, so i thought the battery was dead. I left it on charge over night and when i tried again the next morning it was fine.
this happens everytime with this battery, it just needs a much longer charge than the standard one, and doesnt register properly on the default OS, i havent tried it on my recent upgrade to one of the midget roms.
so try leaving it on charge over night or for a very long time. if all else fails just get a new battery.

That might reset the battery back to life, but I wouldn't exactly count on that. A battery with a broken monitor circuitry is pretty hard to reset.

My last hope,i'm gonna leave charging my phone for a day and then see what happend....I'm desperate

Permanent red light...
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.

wtpelzer said:
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.
Click to expand...
Click to collapse
Could u post it please?!

Took a while but here it is...
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.

Same Problem, Led Indicator Always red
Hi,
We have the same situation, my jasjar just died in my hands, im reading a txt messages then al of the sudden it hangs, so what i did is reset it but it didnt power on, i removed the battery then after 10mins i put it back but then no power,then i charged it but it didnt power on too and the led indicator is always red, they say that if the indicator is red it means that there is no battery or the battery is missing but i check it thoroughly,the battery is perfectly place on the back of jasjer, i even tried to enter to bootloader but it cant. If anyone knows how can i revive my jasjar pls pls let us know....Thank you so much.
So sad till now there's no single solution.....

wtpelzer said:
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.
Click to expand...
Click to collapse
Exactly if my Jasjar is completely dead how can i connect via usb and then use mtty?!
I'm losing my hope to bring it back to live!

have same problem - can do nothing, still waiting
but there is one thing - led flashes once, when i put the charger into the device - but it does nor light, nor flashes - exactly nothing happens

If your device is dead...
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...

wtpelzer said:
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...
Click to expand...
Click to collapse
The point is that the device is dead and that is why the constant red light. I have a device that is stuck on the splash screen (no solution in sight) and another that fell down and broke. The one that fell down does not power on. If you put a charged battery ang plug in the charger nothing happens, no light comes on, but if you put a discharged battery the red light comes on. I have a third Uni that I accidentally flashed with a BA rom. It is behaving exactly like the broken uni, it does not turn on, does not go into bootloader and the red light comes on when I plug in the charger with a discharged battery in it.

For some things, there's just no cure...
Okay I understand where you're coming from but essentially what you need to do, under normal circumstances, is connect it to your PC, which if the device is working at all the PC will detect it but not connect... In the case of two of your Uni's I don't think this will help - the dropped one and the BA ROM failure. The one with the Red LED, which has stopped working could be a component failure on the board or it could be a Corrupt DOC table. Now to get back to how you'd go about fixing it if it is a corrupt DOC table, when you connect it to the PC and the PC detects it you disable ActiveSync and start MTTY it should give you the option of connecting to the USB port, when it does this if you get a prompt the problem should be fixable because MTTY can "talk" to the device... As for the other's try this method and if it doesn't work sell them for parts or canabalise the one for parts for the other...

No more bootloader no more nothing, after rom upgrade s200

Hi All,
I've tried to upgrade the ROM of my QTEK S200.
It got completely stuck!!! I had to remove the battery. Now it stays black. Even a hard-reset does nothing. No bootloader, no white screen, nothing. It's like the device doesn't recognize the battery anymore. Same problem with another battery. When I connect the power supply, the light stays red for 5 seconds and then goes out again. No charging (orange) light.
Does this mean that the device was short-cutted (hardware problem) or can this be fixed with some manipulation?
Anybody an idea how I can fix the hardware (if broken) myself? Can't be to difficult if it just blew a fuse ;-)
Thanks

If the accu not charge, I think he is dead. You need a new one. For flashing new rom, you need a good acco over 50 %. Than you go to bootloader modus and flash a WM5 Rom WM5Rom.

coolb4all said:
Hi All,
I've tried to upgrade the ROM of my QTEK S200.
It got completely stuck!!! I had to remove the battery. Now it stays black. Even a hard-reset does nothing. No bootloader, no white screen, nothing. It's like the device doesn't recognize the battery anymore. Same problem with another battery. When I connect the power supply, the light stays red for 5 seconds and then goes out again. No charging (orange) light.
Does this mean that the device was short-cutted (hardware problem) or can this be fixed with some manipulation?
Anybody an idea how I can fix the hardware (if broken) myself? Can't be to difficult if it just blew a fuse ;-)
Thanks
Click to expand...
Click to collapse
Yep, hes dead alrite, make a good paper weight sorry bro...

not the battery
of course I tried a new battery
same problem

Can you make a downgrade to WM5 ? Ist the battery charged now ?

DC Adapter 4,5 V
I had the same problem.
Remove the battery and connect the pin nr 1 (nearest to the cam) to + and the pin nr 5 to -. I think 3,7 to 5 V is ok. Then bootloader and connect to computer.
Don't blame me if anything goes bad ;-)

how to proceed?
I've tried to do as explained...
I've taken an old charger (5v) and connected the cables (black/white striped to 1 and black to 5). I'm not 100 percent sure about + and -, but normally black is always -, if I'm not mistakin'
What should happen? How should I proceed?
My device does nothing... No light. Power button does nothing, hard reset does nothing.
Does this procedure work with a QTEK S200?
Maybe the charger (old gsm) is too old or broken?
Maybe + is black...
Sooo many options ;-)

Worked on mine S200
Of course You must know if the adapter is working and +/-.
When I connected 1 to + and 5 to - I could operate the mobile as if the battery was mounted and working.
My problem began because the battery isn't charging in bootloader mode.
And I'm still stuck there... Because it's a G4 device flashed with G3 SPL... Anyone got a suggestion how to solve this?

JustBored said:
Of course You must know if the adapter is working and +/-.
When I connected 1 to + and 5 to - I could operate the mobile as if the battery was mounted and working.
My problem began because the battery isn't charging in bootloader mode.
And I'm still stuck there... Because it's a G4 device flashed with G3 SPL... Anyone got a suggestion how to solve this?
Click to expand...
Click to collapse
I Did the same thing '''''HELP"""

What you should do
Keep the device on for 2 hours connect it to the electricity.
Install the original rom with the PDA connected like that to the PC, if it does not enter the Rom update continue trying by doing a hard reset with the stylus and pressing the left com button on the left side of the device, then retry the rom install, if it says unable to connect continue trying, using the procedure i explained before, thats what i did when the same stuff happen to me i was without my device working for a month, now i´m using WM6 with the Diamond Rom, so its possible, to do this you just have to keep trying.

my prophet is block and after try of hard reboot is dont turn on.. its not turn on on any way, no detect charger ether ( no red led ) battery was almost full when its go off..
plz help, can i try 1-5 pins solution?

srbwap said:
my prophet is block and after try of hard reboot is dont turn on.. its not turn on on any way, no detect charger ether ( no red led ) battery was almost full when its go off..
plz help, can i try 1-5 pins solution?
Click to expand...
Click to collapse
My friend. A few people have tried the pin method and one or two have succeeded. IMHO i would not try it, for fear of frying your phone, yourself or starting a fire.
Take out the battery for a good couple of hours. Take out SIm card and SD card. Put battery back in and try to charge for at least 5 hours, even if the light does not show (might just be LED issue).
Then see if you can start in boot loader, u now how to yes? (keep camera button pressed, soft reset with stylus, then let go of camera button after few sconds). What happens?

pins to power
I've tried connecting the extreme small pins to the (big) cables of the charger but nothing happens over here. The screen stays black.
To All,
Any hints on how to connect these cables to the pins, without the fact that they're constantly coming off the pins and constantly touching other pins?
You try and tell me about your experience ;-)

revive prophet revive ;-)
I was just playing with my qtek when I noticed that after connecting and disconnecting it to the AC for 5 times or so (with red light going on and off for a second), it tries to startup, but drops dead after a fraction of a second. Damned ;-) No chance of going into bootloader.
Almost there ;-))

coolb4all said:
I was just playing with my qtek when I noticed that after connecting and disconnecting it to the AC for 5 times or so (with red light going on and off for a second), it tries to startup, but drops dead after a fraction of a second. Damned ;-) No chance of going into bootloader.
Almost there ;-))
Click to expand...
Click to collapse
keep it plugged in for about 5 hours, dont play with it or turn it on lol, give a go unless u have done already and just havent said

Direct Connection to 220v doesn't work
The workaround of connecting the pins directly to the charger doesn't seem to work on a QTEK S200 G4.
Since mine is a G4, I wasn't lucky... I'm left with a cut charger cable.
I'll try to charge it for 5 hours but since no led is going on I don't think this will have any effect.

Listen keep it plug in to the electricity for 12 hours, then try to put it in bootloader mode by pressing the, com button on the left side of the device after you hard reset it, with the stylus after you manage to enter the bootloader mode, you only need to follow the steps described on several posts on the forum.

if nothing works connect the device and try to install the original rom, my device is a g3 so i´m not sure if the g4 works the same way.

[Q] My Htc Sensation 4 wont turn on or show charging led

HI
I am a new android user, i bought an HTC Sensation 4g from ebay, used it for a couple of times without having any issues. One day i switched it off with enough battery remaining and did not get time to use my cell again for a couple of days. Now when i turn it on, it wont power up nor would show if its charging (even the yellow LED does not come on or blink or change color), did a lot of research and tried everything i could do, Here's is what have i done so far
0) tried charging it with wall charger/computer
1) changed battery
2) left my phone connected to wall charger with the battery in
3) left the phone without battery connected to wall charger (i believe that is jump starting??)
4) factory resetting by holding volume down and power button
5) tried adb rebooting (every time i got the same message device not found)
My device is not being recognized by HTC Sync nor does my laptop show any sign of its presence.
What do i do???? please Helppp!:crying:

mahmooddr said:
HI
I am a new android user, i bought an HTC Sensation 4g from ebay, used it for a couple of times without having any issues. One day i switched it off with enough battery remaining and did not get time to use my cell again for a couple of days. Now when i turn it on, it wont power up nor would show if its charging (even the yellow LED does not come on or blink or change color), did a lot of research and tried everything i could do, Here's is what have i done so far
0) tried charging it with wall charger/computer
1) changed battery
2) left my phone connected to wall charger with the battery in
3) left the phone without battery connected to wall charger (i believe that is jump starting??)
4) factory resetting by holding volume down and power button
5) tried adb rebooting (every time i got the same message device not found)
My device is not being recognized by HTC Sync nor does my laptop show any sign of its presence.
What do i do???? please Helppp!:crying:
Click to expand...
Click to collapse
There are several threads on this subject, which also give advice on what to try. In your case I'd suggest either your battery has failed, best case scenario, or your motherboard has suffered instant death syndrome - in which case you might get a warranty repair from HTC if your phone is eligible.

boomboomer said:
There are several threads on this subject, which also give advice on what to try. In your case I'd suggest either your battery has failed, best case scenario, or your motherboard has suffered instant death syndrome - in which case you might get a warranty repair from HTC if your phone is eligible.
Click to expand...
Click to collapse
yep i went through most of them but they have rooted or have dun sumthing, i did nothing of the sort,
i bought anker battery from ebay with my sensation, tried both my original and anker's but the phone wont power up,does this mean my motherboard is suffering from instant death syndrome(lol i m a doc myself and liked it of course the term not the syndrome itself )

mahmooddr said:
yep i went through most of them but they have rooted or have dun sumthing, i did nothing of the sort,
i bought anker battery from ebay with my sensation, tried both my original and anker's but the phone wont power up,does this mean my motherboard is suffering from instant death syndrome(lol i m a doc myself and liked it of course the term not the syndrome itself )
Click to expand...
Click to collapse
Most probably, ring HTC with your serial number and they will tell you if the warranty is still valid.

My device did this once. It wouldn't even show charging light when plugged in ! But I had another full battery for a spare and tried it and it came back to life again! But you a already tried that right? I'd say then it's not the battery. Most likely the instant death. Hopefully you can return it to HTC. If not I would definitely return it to the seller and request a refund of your money! Hope this helps. Best wishes
Sent from HTC sensation, soff, 3.33 firmware, viper Rom, sense 4.1,kernel- faux 10b6 , Mugen 3800 mah battery. Please press thanks if I helped in anyway.

Did you fix it?

mahmooddr said:
HI
I am a new android user, i bought an HTC Sensation 4g from ebay, used it for a couple of times without having any issues. One day i switched it off with enough battery remaining and did not get time to use my cell again for a couple of days. Now when i turn it on, it wont power up nor would show if its charging (even the yellow LED does not come on or blink or change color), did a lot of research and tried everything i could do, Here's is what have i done so far
0) tried charging it with wall charger/computer
1) changed battery
2) left my phone connected to wall charger with the battery in
3) left the phone without battery connected to wall charger (i believe that is jump starting??)
4) factory resetting by holding volume down and power button
5) tried adb rebooting (every time i got the same message device not found)
My device is not being recognized by HTC Sync nor does my laptop show any sign of its presence.
What do i do???? please Helppp!:crying:
Click to expand...
Click to collapse
mahmooddr said:
yep i went through most of them but they have rooted or have dun sumthing, i did nothing of the sort,
i bought anker battery from ebay with my sensation, tried both my original and anker's but the phone wont power up,does this mean my motherboard is suffering from instant death syndrome(lol i m a doc myself and liked it of course the term not the syndrome itself )
Click to expand...
Click to collapse
i have same problem did u get solution to this problem?

Your phone most likely rooted
Hi your phone most likely rooted. Had the same issue when I have replaced the bootloader. Unfortunately there is no good bootloader for this phone out there for rooting that does not cause this problem. You need to unroot your phone, replace the bootloader back to original and relock the S off to S on. But im going ahead of myself. First you need to turn it on and this is how. At least its worked for me every time. There's a trick that need to be repeated twice.
1. Disconnect charger,
2.Remove the battery,
3. press power button few times to discharge all electricity that left in the phone.
4. Now its need to be done quickly press and hold power button,
5. while holding connect the battery,
6. then connect the charger.
7. Keep holding power button for 2 more seconds and release
8. wait 1 more second and press power button repeatedly until you see the green led blinking. Repeat if led does not blink.
That will jump start the relay to switch to charge mode. At that point it will charge but won't show it properly.
9.Charge for 10 to 15 minutes its need to reach 1% it does that very slowly at this point. Do NOT wait more than 15 minutes because after that relay switches off starts to release electricity back to charger overpowering it with amps.
10. After 10 to 15 minutes repeat steps 1 trough 8. This time it will turn on instead.
11. Look online for steps how to fully unroot, replace bootloader and lock the S chip. I know that the steps a little unorthodox but it Work. Hope its helps. P.S Sorry for unprofessional English im not American.

[Q] Sensation dead after pulling battery (blricked?)

Good evening,
In early december i got my Samsung Galaxy nexus to replace my (second) HTC Sensation, which i sold to a coed
I flashed the (at that time) current Viper Sense 4.0 rom and it worked flawlessly until last saturday
She wrote an exam, so she shut dwn the phone, removed the (stock) battery and put it in her pocket, though after reinserting the battery the device does not bother showing any sign of life.
The battery was at about 80-90% when she shut down the phone
i sold her my dockingstation (that can power an additional battery, i gave her my 1900 mah anker replacement battery as well which she did not use that much, dunno why) which she used to charge both batteries. though nothing worked.
The LED does not turn on when plugging the phone into my laptop, my portable anker battery or any charger, it does not boot into recovery, nothing, no sign of any life left. out of nowhere.
Do you have any suggestions what to do or where this could've come from?
it'S s-off'd (juopunutbear version, so it might be s-on'd again, if i could revive it) and i've not yet found the receiptt, so any solution that does not involve sending in the device is much appreciated. if there is no way around this would be the last alternative, but maybe some of you have a suggestion?
Thanks alot in advance

DasGensu said:
Good evening,
In early december i got my Samsung Galaxy nexus to replace my (second) HTC Sensation, which i sold to a coed
I flashed the (at that time) current Viper Sense 4.0 rom and it worked flawlessly until last saturday
She wrote an exam, so she shut dwn the phone, removed the (stock) battery and put it in her pocket, though after reinserting the battery the device does not bother showing any sign of life.
The battery was at about 80-90% when she shut down the phone
i sold her my dockingstation (that can power an additional battery, i gave her my 1900 mah anker replacement battery as well which she did not use that much, dunno why) which she used to charge both batteries. though nothing worked.
The LED does not turn on when plugging the phone into my laptop, my portable anker battery or any charger, it does not boot into recovery, nothing, no sign of any life left. out of nowhere.
Do you have any suggestions what to do or where this could've come from?
it'S s-off'd (juopunutbear version, so it might be s-on'd again, if i could revive it) and she has lost the receipt, so any solution that does not involve sending in the device is much appreciated. if there is no way around this would be the last alternative, but maybe some of you have a suggestion?
Thanks alot in advance
Click to expand...
Click to collapse
Hi,
This might be a long shot.
Remove the battery,sd card,and sim card.
Plug the phone into the wall charger,and charge for 5-6 hours.
Meanwhile charge up the battery in the docking station.
Then, put it all back together,and try again.
If nothing,look HERE

malybru said:
Hi,
This might be a long shot.
Remove the battery,sd card,and sim card.
Plug the phone into the wall charger,and charge for 5-6 hours.
Meanwhile charge up the battery in the docking station.
Then, put it all back together,and try again.
If nothing,look HERE
Click to expand...
Click to collapse
thanks!
might this be some sort of deep discharge or something? i already removed the sd, sim and battery today and plugged it into my laptop, though my USB ports only have ~500mah
will definitely tell her to try that out (as i don't have the phone with me)
/€ i've already looked up the unbricking project, but this requires the device to be reacting in any way
one thing i considered as well: i know the sensation is sensitive to bridging some connections (like the goddamn wire trick that failed so many times when i tried to s-off it in the first place )
might some dust or anything else have bridged some contact points that can cause this?

This seems very similar to the problem with my phone, you can achieve the QHUSB_DLOAD by putting a paperclip in the left hole (rather than the right that was used to s-off) and making contact with the sd card holder.
Though, i haven't been able to actually un brick my device as it still isn't being detected by the bricked script.

this is similar to my phone problem... I only clean the pin connector in phone and battery and expecially in the phone i push in four pin connector ..... sorry for my bad english i hope you understand

thanks, she pluggied it in for sme hrs without SD/SIM/Battery and when she inserted the battery the phone came up again, that did the trick
Dunno how this can happen, but thx anyways!