After I mistakelt upgrade my s200 with a Kjam rom, the device will not turn on again, now I need to boot from the sd card has anyone an OS backup which work on Sd card?
I ll try to alive the device from sd card but I dont know how I copy the os to the sd card.
Do you have the bootloader alive?
thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.
laleyandasvivenporsiempre said:
thanks for your help, no I could only reach to Bootscreen when the wall charger plugged, but naturally I could not update the rom from the charger, so I think the only solution is using a backup image from the sd card.
Click to expand...
Click to collapse
AFAIK, it means that your battery is empty. Try to charge the battery with any working S200/100/110/9100 and you will be able to run the bootloader, then you will restore the device. Correct me, if I wrong.
the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...
laleyandasvivenporsiempre said:
the problem is not about the charger or battery, although the battery 100% it still cant be opened the problem is after load the Kjam ROM, the device reject to open, it could onyl turn on if the wall charger is pluged however I could plug the USB data cable at the same time. I send it to the service center hope they could recover the device...
Click to expand...
Click to collapse
This behaviour is typicel for a device with both broken image and discharged battery. The battery WAS at 100%, but the Prophet does not charge it if has no working OS, so the batery was drained until you tryed to reanimate the device. Ensure that the pattery is full with other, working device.
Walker;
I charge the battery with an other prophet I ll wait untill the light become green and battery is 100% then after when I tried with the boken prophet it did not reanimate the device. it is very interesting to see that wizard could work with prohet's rom but not vice versa
Flash wrong ROM consequences
Let me relate my experiences; exactly the same problem.
Update KJAM rom on DOPOD 818Pro ... Damn phone could not power on at all, at most on bootloader, plugin USB cable --> no USB word displayed at bottom.
Try to flash any RUU also no go ...
ON battery, could not power up at all, only plug in wall charger then managed to get to bootloader ... so all was lost.
Send to EBAY (where i bought from) and they flash the bloody Dopod 830 ROM..
During collection, plugin my own battery, same cannot power up... evidently the flash to Kjam killed my battery too !
The good thing was that with the 830 rom, my IPL became 2.16 (from 1.00).
So i reflashed to Dopod latest 2.15 ROM ok... further flash to AKU 2.3 hacked ROM also no problem.
SO, ultimately the cause was a killed battery from the ROM update.
Use a meter to measure contact pt 1 & 2 from top edge of battery, (supposed to be min 4.7V) I believe it's 0V or totally shorted out.
This battery cannot power on the phone, but still can be used as spare battery by power up with wall charger first, the battery still has it's 3.7V available to sustain operation.
So u can go buy a new battery and Flash to the correct ROM now.
Good Luck
to buyaoxiao;
Thanks for your comments but;
I think there is something more serious than the battery; I have two prophets, and I also try with the other's battery and still nothing happened, more than that, both of the batteries work with the non-broken prophet.
Flash wrong ROM
Hmm.. that may be true also.
I cannot really conclude as i was lucky the ebay shop i bought from agree to flash my S200.. i believed they had some trouble too as it took them a week to get it to Dopod 830 rom ... when normally they say 1 day will do. They refused to go into specifics though... (afraid that i demand for 1-1 exchange)
I have had the same problem, so that's why I decide to sent to dealer to try to fix it. Now I'm expect to have a call to pick it up. Hope they can improve my prophet to the new chip G4.
I tryed several times, hours to fix it, but no way. Sorry I can not tell you something good.
I am sure that there should be a way to fix those devices Jtag should not be the only way( if it really works) it is meaningless to loose a device only because of a wrong rom update
Related
hey all,
i have tried to downgrade my qtek s200 with the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe software i found here.. after everything went quite well, when the phone restarted, the screen started to flash on and off.. and when i dont take the batteries out, the screen, the power led and the bluetooth led turns on and off repeatedly..
any suggestions on what i should do?
thanks..
i have exact the same proplem now
i have exact the same proplem now
Same Problem
Remove the battery - whait about 3 min. - plug ac power cable without your battery - put the battery - when the orange light on, turn on your device.
back to the life, but not solve the problem.
sorry my english, i´m from brazil. (don´t speak english)
sarpsuerdas said:
hey all,
i have tried to downgrade my qtek s200 with the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe software i found here.. after everything went quite well, when the phone restarted, the screen started to flash on and off.. and when i dont take the batteries out, the screen, the power led and the bluetooth led turns on and off repeatedly..
any suggestions on what i should do?
thanks..
Click to expand...
Click to collapse
Sounds to me that you tried to flash a Wizard-ROM on a Prophet.
This is simply impossible, so you probably bricked your device.
well its somewhat working i'm on a prophet bootloader ipl 2.09 spl 2.20 right now and i'm using a crossbow rom from the wizard section right now... (camera is not working).
what you could try is cut the charger wire open and attach the inner cable to the first battery pin (physical top) and the outer wire to the fifth pin. then go into bootloader, connect to computer and flash a prophet rom which has spl and ipl included.
dou you have a g3 or g4 device? on which spl/ipl are you right now...
I did the same thing with my s200.
I remove cable and battery, insert adapter cable and then battery until I get a steady amber light (usually takes 2-4 attempts).
When it boots up I quickly replace the adapter cable with the computer cable and Active Sync works.
I would like to reflash it but I can't since my battery is reporting 0% always, even when the battery is fully charged and it's not charging either. (And I can't get into the bootloader either.)
@crOssy: are the batteries different between models? and if so, would your proposed wiring actually work? have it been tested?
As i said on the title,suddenly i couldn't recharge my Universal anymore,yes i've tried with a brend new official battery as well but everything was in vain.As soon as i plug my charge to my Universal it appear a Red Led and after 3 min or so the led turn off and so the battery.
How can i fix this problem?!
Is there any chance?!
Is it really dead like that?!
Please HHHHHHHEEEEEEEEELLLLLLLPPPPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!
If the battery is really brand new, then I guess the connectors might be damaged or the internal power buses might be broken somewhere. Have you dropped your device recently? Or did anything that might explain broken connectors or internal buses?
Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN
tetsuokaneda said:
Nothing happened to my device and never felt down,it just happened suddenly!Now if i won't be able to fix this by myself this means a finger in da a.. cuz my warranty is expired!DAAAAAAAAMN
Click to expand...
Click to collapse
It can be a software error. Have you tried hard resetting or installing another ROM?
tnyynt said:
It can be a software error. Have you tried hard resetting or installing another ROM?
Click to expand...
Click to collapse
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!
tetsuokaneda said:
That's the point!!!
I was trying to update to WM6 but something went wrong and stucked in boot load screen!Then my battery died but when i've tried to charged again i had that problem!!!
Click to expand...
Click to collapse
Your battery is fine, unfortunately your device broke
Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...
mzalan said:
Unless you have a lot of specialized equipment at home, and the proper qualifications, there's no way in hell you can fix this. I'm sticking with my diagnosis, that either the power routing circuit broke down, or a power bus inside the device.
Really, your best off taking it back to the store, and paying for the repair. Either that, or buying a new phone, and selling this one for spares...
Sorry mate...
Click to expand...
Click to collapse
I wanna die!!!I'm completely Fu.. up!!!
What a terrible news!I can't believe it!!!!
If i'll bring my phone to the assistant i'm gonna pay alot of money,at least 200.00 euro!!!!
similar problem
i had the exact same thing happen to my EXEC when i got 2 new batteries for it. One was a standard sized, pretty much the same as the stock one that came with the phone and one was a much larger capacity one that needs an extra cover for the back.
Id been using the device for ages on this huge battery and the charge said 100% constantly. then the device turned itself off and it wouldnt come back on. upon connecting the charger the LED was red, so i thought the battery was dead. I left it on charge over night and when i tried again the next morning it was fine.
this happens everytime with this battery, it just needs a much longer charge than the standard one, and doesnt register properly on the default OS, i havent tried it on my recent upgrade to one of the midget roms.
so try leaving it on charge over night or for a very long time. if all else fails just get a new battery.
That might reset the battery back to life, but I wouldn't exactly count on that. A battery with a broken monitor circuitry is pretty hard to reset.
My last hope,i'm gonna leave charging my phone for a day and then see what happend....I'm desperate
Permanent red light...
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.
wtpelzer said:
I had this problem, I put the phone on charge but forgot to put a battery in - spare phone... It wouldn't work no matter what I did , until I reformatted the DOC by following the steps in the WIKI.
Click to expand...
Click to collapse
Could u post it please?!
Took a while but here it is...
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.
Same Problem, Led Indicator Always red
Hi,
We have the same situation, my jasjar just died in my hands, im reading a txt messages then al of the sudden it hangs, so what i did is reset it but it didnt power on, i removed the battery then after 10mins i put it back but then no power,then i charged it but it didnt power on too and the led indicator is always red, they say that if the indicator is red it means that there is no battery or the battery is missing but i check it thoroughly,the battery is perfectly place on the back of jasjer, i even tried to enter to bootloader but it cant. If anyone knows how can i revive my jasjar pls pls let us know....Thank you so much.
So sad till now there's no single solution.....
wtpelzer said:
I did the task 28 55aa command in MTTY which should reformat the DOC alternatively you could reload the bootloader using the link below...
MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual.
If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself go to http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
This link gives full instructions :
http://forum.xda-developers.com/showthread.php?t=289325&highlight=task+28+55aa
Hope this helps.
Click to expand...
Click to collapse
Exactly if my Jasjar is completely dead how can i connect via usb and then use mtty?!
I'm losing my hope to bring it back to live!
have same problem - can do nothing, still waiting
but there is one thing - led flashes once, when i put the charger into the device - but it does nor light, nor flashes - exactly nothing happens
If your device is dead...
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...
wtpelzer said:
Well just to answer the question, if the battery is dead and you can't charge it because of a red LED. I suggest you buy a standalone charger from ebay and charge the battery or get someone else to charge it for you. Then follow the steps as I stated in my previous post...
Click to expand...
Click to collapse
The point is that the device is dead and that is why the constant red light. I have a device that is stuck on the splash screen (no solution in sight) and another that fell down and broke. The one that fell down does not power on. If you put a charged battery ang plug in the charger nothing happens, no light comes on, but if you put a discharged battery the red light comes on. I have a third Uni that I accidentally flashed with a BA rom. It is behaving exactly like the broken uni, it does not turn on, does not go into bootloader and the red light comes on when I plug in the charger with a discharged battery in it.
For some things, there's just no cure...
Okay I understand where you're coming from but essentially what you need to do, under normal circumstances, is connect it to your PC, which if the device is working at all the PC will detect it but not connect... In the case of two of your Uni's I don't think this will help - the dropped one and the BA ROM failure. The one with the Red LED, which has stopped working could be a component failure on the board or it could be a Corrupt DOC table. Now to get back to how you'd go about fixing it if it is a corrupt DOC table, when you connect it to the PC and the PC detects it you disable ActiveSync and start MTTY it should give you the option of connecting to the USB port, when it does this if you get a prompt the problem should be fixable because MTTY can "talk" to the device... As for the other's try this method and if it doesn't work sell them for parts or canabalise the one for parts for the other...
my prophet cant recognize the battery ....i can turn on the device sometimes and when i go to seetings\battery\it's 0% i have alredy try other batteries that are fine in other devices ....i try to flash the rom but the update utility cant recognize the battey and dont let me flash it help please....
oh god i am so new and fresh...so many problems with my prophet help me guys
no one can give me the drivers for the battery !!!!
i cant find it .....i think that is the solution
please help me
maybe get a new battery? AFAIK, there are no drivers for batteries
wanwarlock said:
maybe get a new battery? AFAIK, there are no drivers for batteries
Click to expand...
Click to collapse
i have alredy try other batteries that are fine in other devices
the device dosent have the right drivers for the prophet because the rom get an error while flashing
Have you flashed a ROM before?
If the battery is not working in your device, try checking the connections. There are no 'drivers' for the battery, I can flash a ROM in bootloader after flashing a ROM with nothing in it, which means that the RUU is using the hardware rather than software to determine the battery status.
i cant flash again the pro+het because the update utility verify the battery status and then give an error because the prophet doesnt have more than 50 of battery . . . help please
My prophet had the same issue in the past weeks.
I had to restart several times until the phone recognize the batery.
The issue is not only at the OS level because even with the phone turned off it was not able to charge (you can see because of the orange lid).
Sometimes the phone just stoped recognizing the batery and the charge value just stops decreasing.
My guess is that this is related to some ROM's i've been testing, have you switched ROM in the past weeks?
Last night i started using iProphet 1.0.2.3 (sounds familiar? l3v5y) and until now i'm not having problems. (Just appears to consume a lot of batery but ill confirm this in the next days).
The battery drain may be because of the camera. but you can remove it if you want. (it is an installed app)
I think the issue is to do with the hardware, and so upgrading the software will not help. If your charging circuit is damaged, the battery will not be detected. If the device is under warranty, I would suggest getting it repaired...
I've just been looking at the Universal Wiki and I may have a solution:
Solution 3: Recalibrate the battery (2)
Charge the battery overnight with the supplied poweradapter, not with the USB cable
Drain the battery without SD-card, powersaving off and backlight on full
At some level, the device will turn off. Switch it on and go to the bootloader and drain the battery until it's really empty
Charge the battery again with the supplied poweradapter
The idea of this is to completely discharge and then recharge the battery, so that the battery status monitoring system in the battery is reset.
I had a same prob, tested with new battery problem continues...
also help needed over here
Hi All,
After installing Prophet_G3_G4_RadioRom_v2.69.21.exe onto my QTEK S200 it's completely dead. I cannot start it up anymore, even with the battery connected to power. The orange charging light doesn't even go on. I don't get anything here, no QTEK screen, no boot, no nothing even after pressing the button for several seconds.
Anybody knows what happened? Is my battery dead? When I connect the QTEK to the power supply without the battery inserted, the light flashes red for a short second and then... nothing... The battery was almost fully charged when I started the upgrade. IPL was at 2.20.
euh... help!!!
I've already opened a thread for this but anyway... help help
I'm afraid i cannot help you much...
When that happend to me i just made several resets and tryed to start charging until it worked.
After that i've changed the ROM i was using and my batery seems to work better now. Sometimes if i overclock it stop's getting the correct batery values but never stop charging like it used to.
Try charging with diferent methods, a couple of times i was trying to charge with the standart (power line) cable and only worked if i used usb connected to my pc. Maybe a different voltage worked... i'm not sure.
Best of luck
Hi mate...
i have the same problem tooo..
but this is because i have flashed my dopod 818pro..
i use CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE...
i can go to bootloader screen and go to the windows but i have to attached the prophet to the charger, because it will go death if just in battery mode..
please help me...
thank you...
Hello,
My old Tornado had some battery problems, but i didn't suspect it was that bad until it turned off in the middle of flashing. So naturally, i'm stuck in bootloader...
I've retried several times and using USB from computer, after a full charge, it won't go past 25% of flashing (WM6.1 Pro ROM). I wouldn't buy a new battery since i only use my Kaiser, but i would like to get it out of bootloader.
I've been searching everywhere for a solution... Now i'm asking you if you have an idea, like flashing from the SD card, getting a light rom or something ?
Thanks
Hey there,
I am new at all this, but are you doing Format BINFS
Sounds like memory error (hdd error) so format binfs (not just FORMAT) would help.
I am sure you know this pic tutorial.
http://karhoe.net/content/view/21/1/
GL
Thanks for your reply, i've been through all of this already (it's not the first time i flash it). My biggest problem is that battery life (idle) is around 10 minutes, and if charging with USB, it's only a few minutes more (it drains faster than it charges). Only AC charger gives enough power to charge it.
That's why i'm looking for a solution that allows me to keep it plugged to AC charger, or a way to start without the battery
Finally !
I've successfully flashed "WM6.1 Pro DIAMOND CZ,ENG by Veisen" in approx 3'30 ! I guess the battery had enough rest to sustain the flashing process.
Moderators, please close this thread
Hey before thread gets closed you might want to give aditional details to people who might get stuck as you did.
Hi. As you know, i had problems with my sdcard using CM7, so I started to look for good froyo rom. Then I saw rooted french froyo with bootmenu preinstalled. So I downloaded it and flashed through rsd lite (my battery was like 50%).
Rom didn't work, so I downloaded nordic sbf... while i was downloading, my battery run out. Now I cannot flash anything because when I go into bootloader it says "Low Battery, can't progress".
I tryied McGyer method (with usb cable, + to + etc. ) but it doesn't charge my battery. In my city there is no other Defy users. My friend own galaxy s, maybe he can help me, but for now nothing works (other batteries in SE Yari, K800, HTC Magic).
PLEASE HELP ME GUYS, MY MAGIC LAAAGSSS SOOO HAARD...
buy a universal charger! seriously it comes in handy in many occasions.
other than that, you can probably wire your battery to another external charger (lots of cameras come with chargers).
I have only mini-usb and usb plugs, dc in, something like Nokia Charger, I don't have a time to buy a universal charger, but if there is no other way to recover my defy, I can wait...
Try this:
http://translate.google.de/translat...05775-battery-low-cannot-program-umgehen.html
If there is something you dont understand ask me.
I have not tested it becouse i never had this problem.
Ok, I managed to flash new SBF, but to power up phone, I have to plug in usb cable really hard - it won't start without usb plugged in.
Also there is a problem with battery (doesn't show accurate percentage) but it's because mcgyver method and I think this thing can be solved by battery stats wipe.
Any solution for launching phone without USB cable?
mcgyver method should work, but im surprised you say it didnt. did you connect the wires correctly?
Of course I did, now it's charged I think, but I can't launch phone without usb plugged in (no matter is it from motorola charger or PC). It just doesn't respond. Also I have tried wipe battery stats but still says that it's 60% charged all the time. Can it be hardware problem?
Antszej said:
Hi. As you know, i had problems with my sdcard using CM7, so I started to look for good froyo rom. Then I saw rooted french froyo with bootmenu preinstalled. So I downloaded it and flashed through rsd lite (my battery was like 50%).
Rom didn't work, so I downloaded nordic sbf... while i was downloading, my battery run out. Now I cannot flash anything because when I go into bootloader it says "Low Battery, can't progress".
I tryied McGyer method (with usb cable, + to + etc. ) but it doesn't charge my battery. In my city there is no other Defy users. My friend own galaxy s, maybe he can help me, but for now nothing works (other batteries in SE Yari, K800, HTC Magic).
PLEASE HELP ME GUYS, MY MAGIC LAAAGSSS SOOO HAARD...
Click to expand...
Click to collapse
Friend you need to Visit any local Mobile service centers they have got a method of making the phone on without battery. Carry with you the RSS lite Motorola usb driver and the sbf file and don't forget to carry the USB cable. Ask the person to wake up the phone with JAF and you are ready to go I too had the same problem but was lucky to have one friend to help me out.