I have a Treo 750v - UK Vodafone which i unlocked using cheetah unlocker, even though i managed to get to step 3 on the cheetah unlocker which should flash radio back to original, it didnt.
Problem im having now is that the phone works on Orange and T-Mobile UK but no longer works on Vodafone and O2 UK.
Im assuming this problem is with the radio, how can i remove this?
I have tried the method with a MiniSD card, it flashes the bootloader but still gives me the same problem and Olipro Hard-SPL 1.40 is still on the phone
Does anyone have a solution PLEASE? or a workaround so i can get at least Vodafone working again?
Related
Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?
yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked
Thanks, hopefully my M600 is in the post at the moment
Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen
Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.
Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it
Hi guys
I've just unlock my Orange tytn2 because I want to use a Tmobile UK sim .I did read here sometime ago that flashing Orange phones might brick it.How do I go about using a different rom so as to get Tmobile setting?
Thanks
There is a piece of softeare called connection setup. this will auto detect the network and your tmobile sim and will prompt you to install the settings.
I am on Orange UK and that software was taken off as part of the Orange UK customisation.
Now, usually most cooked ROM shefs have included this Connection Setup software with the ROM. so once you flash your phone (and only do so after you have extensivley Read and Read the froum) you will be able to get the setup automatically.
If you didnt want to go through all of that yet, you need to find the cab (software) and run it. most threads with cab collections will have it.
bammyman said:
Hi guys
I've just unlock my Orange tytn2 because I want to use a Tmobile UK sim .I did read here sometime ago that flashing Orange phones might brick it.How do I go about using a different rom so as to get Tmobile setting?
Thanks
Click to expand...
Click to collapse
Make sure you hardspl before flashing a new rom, most roms have connection setup after the flash.
If you want to avoid bricking your Orange TyTN II, and wish to flash a new radio (or new rom including a radio), you'll have to SIM unlock it first.
I did it on a french Orange TyTN II, and everything went fine.
If you directly flash a new radio (alone, or together with the ROM), the SIM lock window will pop-up, and you will have to get the code from Orange before being able to use your phone again.
I have an orange spv c600 that had orange sim. I no longer use the orange mobile (hated it) and want to use my O2 sim card instead. Now I've application unlocked the phone already using the methods found on forums, and when I use Checkit.exe it confirms that the phone is application unlocked, but I can't seem to get it unlocked to work with the O2 sim or any other sim even. I think the problem has something to do with the CID. I tried setting the CID to 11111111111, like it says to do in the SPV services but everytime I checked it nothing has changed. I'm using the I-mate Rom on the phone. Tried the Cingular 2125 but that didn't help.
Anyway help appreciated. Thanks.
to all who had been encountered this need you help...
palm treo 750 unlocking..
i had been unlocked the phone using cheetah unlocker
flash SPL successfully
unlock radio successfully
and put herm unlocker at prog.files and run it..it was also successful
when i enter now un-accepted sim it says that....
you have tried 91 times .please wait until time out
i was powering without touching it for almost 4 days but still 91 times
i also tried reseting it still that problem...
anyone out here who could help me in order to put the unlock code so that i will request its codes....
just want to update this trade,admin and to all
phedz said:
just want to update this trade,admin and to all
Click to expand...
Click to collapse
updating..............................
any one.......
I've had this issue too, and to date, I haven't found a solution. If you do find a solution, I'm grateful for it.
i had been unlocked the phone using cheetah unlocker too ...
bootlogo:
By Olipro & Cmonex
IPL-SSPL-OliNex
By Olipro & Cmonex
SSPL-1.01.OliNex
flash SPL successfully
unlock radio successfully
and put herm unlocker at prog.files and run it..it was also successful ...
but "un-accepted sim" ...
"direct bootlogo" (reset+media):
CHEE100
IPL-0.20
CHEE100
SPL-1.40.OliNex
start "cheetah unlocker" :
bootlogo ia again:
By Olipro & Cmonex
IPL-SSPL-OliNex
By Olipro & Cmonex
SSPL-1.01.OliNex
... its OK ?
Hello all
I got a T-Mobile MDA Vario IV Raph 300. I flashed SPL for waranty with StockSPL_ForWarrantyOnly_SPL190_1.zip. I flashed before with stock Tmobile win 6.1 with radio, but when i flashed it with the stock spl, it doesnt want this windows. I tried over 30 original windows 6.1 what i found on wiki or elsewhere. Please, how can i unbrick it? I need to put there again the hardspl, i dont mind about the warranty. I need it just working.
So... any ideas how to put there hardspl under bootloader? or any other ideas?
Moved as not ROM Development.
uuuuuuuuuuuuuuup
btw... in windows it writes CDMA, how is this possible, that from stock spl from GSM thread it writes CDMA in drivers????
upppppp, any suggestions???