Database Info

Vox Update SPL (USPL) 1.16

Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here

I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.

noob question
what the difference between sim unlock and cid unlock?

This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.

jockyw2001 great but make one for htc oxygen pls.

htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm

hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here

anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???

so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers

neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??

acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.

input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...

neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.

jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers

Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks

thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.

why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?

Successful rom flash done on a spv e650 on a sim unlock device UK orange

First Rom Upgrade

hi guyz
am going to upgrade my XDA-Exec (Universal) G4 for the first time. its currently running WM5 from O2 but i am going to use it with another Service Provider.
now want to make sure of couple of things.
first... is there any HardSPL type of programe for Universal so that atleast i dont endup bricking the phone ?
second what exactly does the CID/EROM locks are for or SIM lock. I can use my other companies SIM in this phone so do i still need to do it ?
third how safe is the ROM updating without anything like HardSPL....?
reason why iam asking this is because its my friends phone and dont wanna brick it and second i have upgraded my HERM but have not done a Universal WM5 to 6 or 6.1 upgrade

Welcome.
No Their Is No HardSPL For Universal.
IMHO CID Unlocking Should Be Done As Various Bootloader Commands For Recovering The Device Will Only Work On A CID Unlocked Device. (I Think!)
Rom Upgrading Is Relatively Safe. Jus Make Sure The Battery Is Fully Charged.
Read The WIKI For More Information.
I Hope All Goes Smoothly For You.
P.S I Highly Reccomend Tomal's 8.0 Rom!
Regards,
OllieD

aaaa what is IMHO CID ? and how do i unlock it ?

Tis In The Wiki...
This Link Should Help You Out...
http://wiki.xda-developers.com/index.php?pagename=Uni_Simlock_by_Buzz_and_team
This Tool Is For Sim Unlocking The Device But Also Makes The Device SUPERCID (SUPERCID Unlocks All Bootloader Commands)
Regards,
OllieD

STUCKK .... Yikeeesss
guyz ..
i got the ROM updated last night and was using when i finally thought of using another ROM... while upgrading the other rom it just gave and error message on the PC and the phone was on the page where it ask you to press 0 for default ... so i did that and the phone restarted but now its stuck on the Splash Screen (the O2 operator starting screen) ...
if i connect the phone to the PC it will not recognize the phone as its totally stuck on the Splash screen ... if i try to goto the bootloader screen it gives me the same message of either Pressing X or 0 ... also the USB is not recognizing it ..
what to do .????

WST 4.2.2 Unlock problem on E650

Hey Everybody,
I have a problem unlocking my Orange SPV E650 using Wizard Service Tool.
-Hard reset the device
-I copy CERT_spcs.cab and EnableRapi.cab to my device
-I install both files (CERT_Spcs.cab won't install: "not intended for this
device"?
-I open WST 4.2.2 and click "Repair IMEI".
-The "Repair IMEI-box" opens and show nothing (in both fields)
I've tried this with different ROM's (VOX, E650, S710).
I've also tried different "unlocking CAB's" (RemoveSecurity.cab, SdkCerts.cab)
I've also tried it with "Microsoft Security Configuration Manager" (this works)
Problems:
-I can't alter IMEI
-So, I can't unlock the phone from Orange
When I boot the phone in bootloader-mode it shows:
------------------------------
VOX WIFI
ONBL 1.35.0000 LG
VOX
------------------------------
SPL 1.35.0000
VOX IU
------------------------------
CPLD - 04
USB
------------------------------
I really don't understand what is wrong with this thing.
I have already unlocked a few S710's this way, and it worked flawlessly.
Does anyone have any idea what's wrong?
BTW: I have a good working (unlocked-) S710 laying around here.
Is it an option to make something like a "full backup" of that one,
and write it to the E650?
Thanks you for any help!
BR,
Bart

There is a unlock thread here, where it tells you what exactly you need to do. It comes with a small "donation" though.

Hi!
Thanks for the fast reply.
I have already unlocked so many phones, that I just won't have it that I cannot unlock this one for free; it's like a sport ;-)
Apart from that, I have already unlocked multiple phones of this (hardware-)
model, so I would really like to do it myself, with maybe a little bit of help.
I have already read all unlocking threads, and my problem is not mentioned, that is why I placed this post.
For money you can unlock anything, but it's just no fun... ;-)
BR,

Oh, OK I see your point. Just don't brick it...

LOL, I'll try not to... ;-)
Any hints on my problem?
Thanks in advance,
BR

as its an orange e650 -same as i have
i found i couldnt flash a new rom as it was locked
all i did first was install Orange debrand pack from Modaco forum and voila! lets you flash!!
maybe thats why you have unlocked other 710's as yours isnt a 710 yet its a E650!
hope that helps-worth a go

Hi,
Thanks for the input.
I'm not trying to flash a new ROM - that works.
I'm trying to sim unlock the phone...
BR
Bart

do you have uspl the phone?

What he tries has nothing to do with USPL. He tries to remove the SIM-Lock, which prevents you to use a different SIM-card.

Hello Frauhottelmann,
Thanks for sorting that out ;-)
BR

Cant remove Olipro Hard-SPL 1.40

I have a Treo 750v - UK Vodafone which i unlocked using cheetah unlocker, even though i managed to get to step 3 on the cheetah unlocker which should flash radio back to original, it didnt.
Problem im having now is that the phone works on Orange and T-Mobile UK but no longer works on Vodafone and O2 UK.
Im assuming this problem is with the radio, how can i remove this?
I have tried the method with a MiniSD card, it flashes the bootloader but still gives me the same problem and Olipro Hard-SPL 1.40 is still on the phone
Does anyone have a solution PLEASE? or a workaround so i can get at least Vodafone working again?

hardspl problem :(

hi , i've a tp2 t-mobile with german language , i tried to hard spl my phone with the 2 versions of hardspl but i always have problems with both : the first says that i ve used it before ( i never done this ) and the second works but i have a message on the screen of the phone that says WARNING this package is not intended for your device type!! High chance of bricking !! exiting now . : and i ' m obliged to click "ok" please help me on that ***** problem and if this can help you , when i open the bootloader that's exactly what appirs : rhod100 35m ss-bc
spl-0.87.0000
Micro ( led) 0x0a
MicroP(key) 0x04
Turbo hw/Turbo sw
TP mfg data
0,0 0,0
0,0 0,0
0,0 calibrated
thx

WELL
try Olipro's HSPL package. make sure it is the one meant for your device also. not calling you stupid, just saying

hardspl problem
When downloading the Hard-SPL from a forum many users experience problems with the error saying they have already unlocked a device when they haven't. Your best bet is to download the Hard-SPL software straight from Olipro's website and if you still have that error just simply send him an email explaning the error and he will clear the situation for you so you can get your 1 free unlock. Olipro has the best Hard-SPL unlocker for GSM or CDMA just make sure you choose the right one... GOOD LUCK!
Try Here: rhodiumw . htc-unlocks . com/hard-spl . php
Just delete the spaces.