Database Info

Anyone managed to upgrade Orange M600 to Imate Rom?

Has anyone managed to upgrade a Orange M600 to the Imate Rom using the ROMUpdateUtility.exe on this forum?

yes, i used imei check to unlock and and set the cid, then used the latest imate rom (2.13.9.23 WWE)
It is much faster in general use and i am sure the screen redraw in tomtom 5 is smoother. other added bonus is no more orange branding!
You can use a modified RUU utility that is posted here bypass the need to change the cid, but you will still be simlocked

Thanks, hopefully my M600 is in the post at the moment

Would like help
I also have a UK orange M600 locked to Orange and would like to put the I-Mate rom onto it.
What files to I need to get.
What is cid
Do I need to have my phone unlocked 1st.
Could someone please give me a step by step how to instruction on how the process is done.
Is it totally successful in all ways.ie does everything work.
Can I make a backup of the original rom.
Many thanks in advance
Stephen

Got my M600 today and flashed it straight to the Imate Rom. Always prefered the Imate software.
No you dont need to unlock the phone before flashing. just search the forum for the guide and file needed to flash any Rom. Very easy.

Does it work
Ok
Does it all work ok ie
Bluetooth
WiFi
Ird
Internet
MSN
What was the name of the file or files u used and how did you do it

cid unlcok for chipset 4?

I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001

http://blog.neten.de/read.php?66
???????????????????????????????

A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!

yes please if this is a way to cid unlock a G4, can someone please translate?

not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.

Kensu, thanks for your time!

If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!

abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?

inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.

abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!

Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino

Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )

Thanks
Great !
It works... Thank you so much
Merlino

Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks

Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?

You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24

No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!

I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)

Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???

I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.

Orange SPV C600 Application Unlock

Hi Peeps,
I have been researching many websites without any luck. I am new to Windows Mobile devices and looking for some assistance in Application Unlocking the C600/Tornado.
I have seen some posts about flashing it with the Imate ROM. The phone itself is sim unlocked however I am trying to install some third party applications and it is stating I don't have enough permissions.
I have tried various Registry editors but they won't install.
Can anyone help?
Edit:
I have tried using the HTC Unlocker. It states unable to open regedit.exe. I have also tried SDA_Applicationunlock.exe I get the message "Phone is not unlockable".
This is driving me crazy, can anyone help.
Cheers
Werdns

16 views and no replies, if anyone can provide any information that would be great.
Werdns

In archive three files.
The names begin with 1,2,3
In this order start all three

Many Thanks Alexx,
I believe I have the AKU2 update, will this still work?

Thanks so much. It worked a treat!!!!

100% working solution needed

unlocking spv c600
Hey guys
I have followed the above steps to unlock my phone, and I'm still gettting an "Invalid Sim card" error.
I have tried just about every unlocking app or method there is, and still no luck. I have a new SPV C600 which I got on an Orange contract about a year ago. And it's security locked so I can't edit the registry, and I can't install any certificates either.
And though I tried the 1, 2, 3 step method above, and tho it told me it was successfull on all 3 steps, my O2 sim card still doesn't work.
Waahhaaaa....
help please

i have bought TMobile SDA. Can we unlock with this ? If not can anyone tell me how can i unlock it myself..help needed urgently..thanks in advance

Alexx~ said:
In archive three files.
The names begin with 1,2,3
In this order start all three
Click to expand...
Click to collapse
THANKS; THIS WORK FOR ME 100%

Where can i find the archive?
hi guys (and girls)
i tried to find the archive to put the 1,2,3 but i realy can not find it.
is now running on the latest rom from orange, i realy like to un lock it.
sorry i am a newbie
pls help me
tnx
|Ger

spv c600 unlock
Hi Guys,
I've been trying to unlock my SPV C600 following the instructions mentioned above. However, in order to complete these 3 steps, seems that I need an additional application to open the file extension .cpf found on steps 1 and 3.
I was wondering if anyone could help me with addtional download or instructions to solve to my issue pleaaaaase.
Also, should I put a different simcard, orange simcard or leave without simcard while I run the application on the phone?
Sorry about these stupid questions.
Many thanks for your help.
Thanks for the file Alexx~
Fontanella

Please have a look at this link
http://karhoe.net/content/view/21/1
or
http://robertpeloschek.blogspot.com/2006/03/howto-application-unlock-your-windows.html
It is useful unlock your phone.

hmmm i have also tried almost every way of application unlocking on the internet
i have a SPV C600 and i cant open regedit.exe
these 3 applications havent worked for me unfortunately
any other ideas caus im all out and im on the brink of giving up
if someone could please pm me with a few suggestions i might have missed one
its getting late and i dont want to break my phone by firmware or fist...

Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico

I've just application unlocked my Qtek 8310 using 3 steps.
Thanks.

chaqueun said:
Check my post it probably helps you http://forum.xda-developers.com/showthread.php?t=412139
See ya from Mexico
Click to expand...
Click to collapse
thank my freind,my SPV is now unlocked by this method

@Alexx~;
me i have got errors->unknown error-2147014795 in read operation with SPV-Developers services what is the hell is this?

working!
Thank you even old post!It help me to much!!!!!!!!!!!!!!!

plzzzzzz help me with my spv c600
GUYz MY PROBLEM IS HUGE. I AM STUCKED ON A THREE COLOUR SCREEN ON MY SPV C600 CEEL WHILE I WAS TRYING TO UPGRADE IT. THE ONLY ROM THAT SEEMS TO WORK , ONLY STOP AT 2% (WM5) DURING THE PROCESS. WAT SHLD I DO. I HAVE BEEN ON THIS FOR ABOUT 2WEEKS. PLZZZZZZ HEP [email protected] IS MA EMAIL

Seems like the same story over and over again... sigh.
You first must get access to the old OS again. As you have not succeeded in doing any upgrade yet, the old OS should still be there. Do a hard-reset:
1.) switch off
2.) press l+r softkey + keep pressed until a next step tells to release them
3.) switch on device
4.) wait for white screen with advice on hard-reset, release L+R softkeys
5.) press key for hard-reset (should be 0)
Device reboots to old OS.
When old OS is up you MUST(!) application unlock the device before you can do anything else. The Orange devices are especially resistant to allow this crucial first step. I have no such device, but key to success is that SDA Application unlock tells that your device is successfully unlocked.
Look for C600 Unlock to find dedicated instructions.
Mind that after the application Unlock you need also the CID Unlock and (if SIM locked) also the SIM Unlock. All is possible for free, so no need to spend money for that.

Vox Update SPL (USPL) 1.16

Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here

I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.

noob question
what the difference between sim unlock and cid unlock?

This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.

jockyw2001 great but make one for htc oxygen pls.

htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm

hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here

anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???

so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...

madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers

neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??

acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.

input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...

neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.

jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers

Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks

thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.

why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?

Successful rom flash done on a spv e650 on a sim unlock device UK orange

Vox Italian official ROM needed - Vox Bricked.

Hi All,
I need an Italian Official VOX ROM or instruction how-to flash unsigned ROM.
Please note that I have flashed a wrong ROM and Activesync does not work, I can access only though bootloader.
Can anyone help me?
Thanks

Here is something you could try : http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Try naming the VOXIMG.nbh instead of HERMIMG.nbh.
but I really don't know if this can work. most likely not in fact since I haven't seen it described for the vox on these forums..
Sorry I have really no experience in bricked devices. Well I bricked mine several times but usb connection still worked through bootloader, so I could start ruu updater when in bootloader mode and it worked fine.

I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater, every time i go to flash a rom i get errors saying wrong VendorID etc... this is because the rom i flashed had different ID's to the original HTC ROMS. Maybe you are signing them different to me?
Please help!

Hi Doctor,
it does not work with VOX.

iceberg2403 said:
I have bricked my Vox making custom roms, but have found that even though i can get into the bootloader and run up the RUU updater ...
Please help!
Click to expand...
Click to collapse
i`ve made the same mistake (flashed a ROM cooked by me) ... but prior to flash my phone i was lucky enough to use USPL 1.16 to permanently flash my SPL to 1.16 (i`ve used both archives Vox USPL-CID BYPASS.zip and Vox-USPL-RUU.zip) instead of 1.27 (original, vendor locked).
On the XDA ftp is a italian ROM if i`m not mistaking, did you try it ?
try this ... i`m not sure it will work.
Make sure you have disabled the USB connection in ActiveSync:
File --> Connection settings --> uncheck "allow USB connections"
1. get into booloader mode
2. connect with mtty
3. write password BsaD5SeoA
4. try to run the USPL 1.16 now ... (i`m just guessing)
if it doens`t work reset the phone and repeat step 1. and 2. and continue with:
3. write password BsaD5SeoA after that ruurun 0
4. try to run the USPL 1.16 now ... (i`m just guessing)
alternatively instead of USPL you can try to run the italian rom from the ftp.
i`ve managed to save my phone doing steps 1, 2, and 3 (not sure which one worked) from above and then flashed with ARA ROM ... but keep in mind my SPL was 1.16.
hope this helps

I'm italian could I help you...
Hi i'm italian and i'm totally nwe on those things...eheheh i haven't yet underrstand what those cooked roms are..but I have an italian s710 with the original rom...with some software on it..If i could help.... let me know..maybe send me a PM or a mail through the forum mail system..
ciao ciao fammi sapere
bye bye just let'me know

with TheBo`s help the problem is almost solved :d

My intention was just to ask if a backup of my original HTC VOX (unbranded) could help...sorry...next time I will not do the same mistake.

SPL
Hi,
unfortunately this does not help because my VOX is CID locked “g_cKeyCardSecurityLevel = FF” and Activesync does not work, for this reason I’m not able to flash any unsigned rom.
My SPL is 1.27.
I have tried to flash 1.16 but the procedure does not work.
It is a way to CID unlock my VOX from bootloader?
Can anyone cook a signed Italian ROM?
Thanks.

maybe TheBo`s ROM will work for you

Nop,
it does not help until my VOX is unlocked...

alllof said:
Nop,
it does not help until my VOX is unlocked...
Click to expand...
Click to collapse
if the Vendor ID is the same it will work
my Y! ID is maxtry80, TheBo and alllof contact me there, maybe i can help you

If you would to help us you can try to cook a signed rom from the dump in ftp://xda:[email protected]/Vox/ (file name: s710 rom 1.15.408.2 (italian + uk eng + us eng).rar) or give to us instructions how to do it.
Thanks for your help.
Regards.

i`ll try to help you ... i`ll be back in couple of hours with results

Thanks for your help!

check you pm!

did it work?

i tried the method posted a while back with no positive results .... yet
I was just wondering, i looked at the bootloader and it says Vox SPL 1.15 so this is the version i am using and it doesnt let me flash another vendor id rom...

VOX Briched.
Nop,
it does not work. I have sent my device to HTC...

Can you tell me how it works out?? I am hesitant to send mine to HTC (i had to import this phone) which will mean i have to pay heaps for shipping... and even then i dont expect them to replace it because the last rom i flashed had a different splash screen (silly me ) this will be obvious to them and therefore wont replace mine because i tampered with the rom.