Hello,
First I spent my last 3 hours searching on the net and on XDA forum to find a solution...
I explain my problem now.
I uprgraded my HardSPL to 3.29 recently, and my radio to 1.71.09.01
Then I upgraded my rom Ultimate-X V8 to V9
It worked perfectly until tonight were my battery went empty and my phone turned off... now my phone don't want to boot anymore, each time I do a reset or put my battery out and back, it start and then it's stuck on the PDA corner ultimate logo...
I don't know what to do.... do you
Sorry I finally as a lot of person find by myself the solution... I pushed On/off + Camera and I reached the bootloader... so I flashed again my phone and it worked...
Congrats
I'll close the thread, it's best to ask these questions in the existing threads (see the sitcky) in the future.
Dave
Related
Please can some one help?
I have recently flashed my phone again to one of the new roms but the phone stopped at 99% and said there was an error. I followed the screen unplugged the phone and left the battery out re connected it followed the screen and now I am stuck with the 3 coloured screen and no phone! any Ideas or is it now for the bin?
Thanks in advance Nick
nickfreestone said:
Please can some one help?
I have recently flashed my phone again to one of the new roms but the phone stopped at 99% and said there was an error. I followed the screen unplugged the phone and left the battery out re connected it followed the screen and now I am stuck with the 3 coloured screen and no phone! any Ideas or is it now for the bin?
Thanks in advance Nick
Click to expand...
Click to collapse
Search. The solution is on the forum!
Search. The solution is on the forum!
I have looked and tried to down load other NOCID_RUU_flasher_xda-devs with the Uni_WM6_Midget_orig still no Joy at 99% and If I use the crossbow I get the same problem! I have used my original PPC_Update_smart1_wm6_pp8mb and I get not connected to PDA? So I am back to the beginning! Any Ideas?
hi, i flashed the tnt .1933 rom yesterday evening.. after the setup was complete.. the phone application wouldnt wrk,every tym it goes in stand by, i havta to take the battery out to turn it bak again..it doesn't turn off at all.. havta take the battery out.. doesnt go to bootloader.. while tryin to reflash it .. it jus sits there.. n freezes.. a messege in computer comes sayin..utility error or sumthin.. doesn't read my sd card..
All in all it jus made my phone completely useless..
NEED UR HELP!!!!!!
First off, YOU (and you alone) chose to flash the ROM. MANY people are using that rom with little to no problems, so don't blame the rom or the cook (you message to me implies this) that your phone has issues due to something you chose to do.
Second... Posting stuff like "utility error or sumthin." is worthless. How are we supposed to help you debug something when you can't even tell us what it really says? Sorry but my crystal ball quit working a long time ago.
Third... You haven't told us anything about your device. What's your IPL and SPL? Did you CID Unlock or are you doing this with Shelltool?
Fourth... Put the thing in bootloader. Take the battery out. Then hold down the camera button and turn it back on. Once in bootloader then flash an official rom (Not another custom) to clean it all up. Then try going back to a custom.
To me it appears you had a bad flash. I think a lot of people here don't follow the instructions about that when you start a flash DON'T DO ANYTHING ON YOUR PC WHILE ITS FLASHING! Walk away for 10 mins and let it do what it needs to do. Even sending IM's can cause a flash to screw up (I've had it happen to me).
yes it is CID unlocked.. i was using NBD 8.3 before i tried to flash this rom.. i aint blaming no one.. i jus need help on how to fix it.. if it went to bootloader mode i wouldnt be posting a sos..but it doesnt..
So i was just wondering if there was some other way to get it to bootloader mode..
spl.. and ipl.. are2.xx
thnx
use search, and look for "force bootloader"
i just reached home.. and was trying to goto bootloader mode again.. i took the battery out.. it is fully charged. it made a beep sound once.. n whn i take the battery out.. the screen blinks once.. b4 going out.
Thnx
hey, my mda doesnt even turn on anymore after i flashed it with a bad rom, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. and when i flashed that rom the it changed my G4 spl verison, it was 2.26.xx.xx, now it added "i" after the numbers and changed it to "2.21.xx i" ..do u think my phone is bricked? or i should def. get a new battery and try it out? even though if i buy a new battery do u think i can still flash it back to the offical rom or love rom wizard.
joco2560 said:
hey, my mda doesnt even turn on anymore after i flashed it with a bad rom, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. and when i flashed that rom the it changed my G4 spl verison, it was 2.26.xx.xx, now it added "i" after the numbers and changed it to "2.21.xx i" ..do u think my phone is bricked? or i should def. get a new battery and try it out? even though if i buy a new battery do u think i can still flash it back to the offical rom or love rom wizard.
Click to expand...
Click to collapse
as was stated in the second post
mfrazzz said:
First off, YOU (and you alone) chose to flash the ROM. MANY people are using that rom with little to no problems, so don't blame the rom or the cook (you message to me implies this) that your phone has issues due to something you chose to do.
To me it appears you had a bad flash. I think a lot of people here don't follow the instructions about that when you start a flash DON'T DO ANYTHING ON YOUR PC WHILE ITS FLASHING! Walk away for 10 mins and let it do what it needs to do. Even sending IM's can cause a flash to screw up (I've had it happen to me).
Click to expand...
Click to collapse
Basically what you need to do joco is take the battery out and leave it out for a few hours then try to boot your phone, its worked for me and if you are trying to charge it use a mains charger not the usb lead,the usb lead just doesnt charge the phone unless there is some life left in the battery.
but my phone is fully charged.. i just want to flash my old NBD 8.3 bak to it, but i cant.. it doesnt go in bootloader mode.. at all.
i downloaded wizard setup tool.. to make it go to bootloader , but it still doesnt go..it also says. DOC write protected..
my phone was CID unlocked . and sim Unlocked. but in wst. it shows.sim0000000000001 LOCKED
i also downloaded, loziwiz to unlock the CID,and the sim, but the same results..
the phone doesn't even turn off.
thnx
after number of times. hard resetting my phone.. finally it works.. fine.. yea i cant flash another rom..nd it says sim and cid locked for some reason.. but atleast i can use it now.. hope ur phone wrks.. tooo
thnx everyone whu helped.
scousemartin said:
as was stated in the second post
Basically what you need to do joco is take the battery out and leave it out for a few hours then try to boot your phone, its worked for me and if you are trying to charge it use a mains charger not the usb lead,the usb lead just doesnt charge the phone unless there is some life left in the battery.
Click to expand...
Click to collapse
i did that yesterday a left the battery for an hour and plug it in and it still wont turn on.
Hi guys, I got a little problem here. I flashed my kaiser to hardspl and flashed duttys supafast rom. The problem is that now if I turn my phone off and then on again (by soft reset or hardware button (not hard reset)). The phone does not boot up, but instead goes into the boot loader, quickly flashes "no image found", goes back into boot loader and stays there. Then i have to pull out the battery and put it back in, leave the phone without turning it on for about 30mins then turn it on and it works fine then. Ive tried flashing other roms, radios and reflashing hardspl. But nothing seems to work. Does anyone have the solution ? I would be greatful ! Thanks in advance.
have u tried the thread regarding the mtty option?
where this thread?
try this out. it seems to have worked for a few people. or to make sure u could do a search for mtty bricked.
however, i dont think u are bricked. just take few breaths and do a search.
you will be fine. good luck.
nope did not help it still does the same thing...... any other ideas ?
same problem here http://forum.xda-developers.com/showthread.php?t=361045
soft reset with usb (also ear mic) plugged into is ok
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope is the solution...
StashCompInc said:
nope did not help it still does the same thing...... any other ideas ?
Click to expand...
Click to collapse
I don't know which command you tried with mtty?
Try the command:
task 28 55aa
not just the command:
task 28
Hope this helps!
KOR!
Solution found !, Just flashed super cid, and now the phone works like a charm !
I'm glad someone finally recognized and appreciates the value of that tool
Hello Guys, I've got a problem with my Polaris200. (XDA Orbit 2)
I already searched for the same issue on the polaris forums but didn't find someone who has the same problem.
Problem description:
5 days ago i flashed my XDA Orbit 2 back to the official O2-WinMobile-6.1-Firmware (GER). I had different cooked roms on it, M-Amine 2.0 was the last before this. Hard-SPL is installed of course.
At first everything was fine after flashing to o2-firmware but after a soft reset, the following happened: my phone is stuck at the o2-splashscreen, then restarts again and again every 20 secs. Maybe it helps that I can say that there is no status shown in lower-right side which usually appers ten seconds after soft-resetting the phone.
I already tried a hard reset via Bootloader Mode and a reflash of the same firmware, but the issue remains
Any suggestions what I could do?
Thank you in advance.
EDIT:
Finally I made a big mistake using mtty. The execution of task 2a erases the whole NAND... unfortunately my device isn't security unlocked so far, so that it seems to be bricked!
Do you really have no idea? Maybe there is a way using mtty.exe?
I think the main problem is, that the R+P+R (Radio+Protocol+Rom) isn't displayed at the splash-screen when booting.
Next problem is, that I can't use my guarantee because I can't reflash to original SPL due to the fact that I can't get an active sync connection because windows mobile 6.1 is not booting.
I could really need some help
wick3d337 said:
I could really need some help
Click to expand...
Click to collapse
Try the Recovery procedure. Remove the battery wait for at least three seconds, replace the battery. Flash again. Keep fingers crossed.
I did this before the "hard-brick" via task 2a...
I even removed the battery for 48 hours and replaced it... but same issue as before!
I m having 100% same problem. Tried installing different roms, even original orbit2 rom but nothing works. U r all requested to pls. Help me in this.
Thank u in advance.
i have posted this problem of mine almost in everythread but no one addressed my problem.i successfully flashed my universal with Tomal's V8.9 W.M.6.1 ROM.
the ROM works great but just 2 minutes,the phone shuts down.its like,the backlight goes dim,then more dim and finally shutdown.the only way i can restart the phone is to connect it to the computer via usb cable and then start it.i have a G3 device.and not just this rom,even after flashing W.M.6.5 roms and shadow_Nuxus's roms the problem persists.
Current ROM : Tomal's V8.9 W.M.6.1
Current Radio: 10.03.03
Im not able to use my device more than 2 minutes.
Somebody please help and guide me.
if you can turn it on again with external power i think you got a battery problem.
every time we do reset or hard reset can make a bad battery down.
indrastrid said:
if you can turn it on again with external power i think you got a battery problem.
every time we do reset or hard reset can make a bad battery down.
Click to expand...
Click to collapse
ok thanks for replying.actually,the universal i had was my friend's handset.iv given it back.
i request mods to close this thread.
the solution
hi, i had the same problem, it's not your battery or any hardware on your universal i think, is the radio version, update the radio version, the last version is 1.18
tell me if this works, bye =)
As per OP request, thread closed