Please can some one help?
I have recently flashed my phone again to one of the new roms but the phone stopped at 99% and said there was an error. I followed the screen unplugged the phone and left the battery out re connected it followed the screen and now I am stuck with the 3 coloured screen and no phone! any Ideas or is it now for the bin?
Thanks in advance Nick
nickfreestone said:
Please can some one help?
I have recently flashed my phone again to one of the new roms but the phone stopped at 99% and said there was an error. I followed the screen unplugged the phone and left the battery out re connected it followed the screen and now I am stuck with the 3 coloured screen and no phone! any Ideas or is it now for the bin?
Thanks in advance Nick
Click to expand...
Click to collapse
Search. The solution is on the forum!
Search. The solution is on the forum!
I have looked and tried to down load other NOCID_RUU_flasher_xda-devs with the Uni_WM6_Midget_orig still no Joy at 99% and If I use the crossbow I get the same problem! I have used my original PPC_Update_smart1_wm6_pp8mb and I get not connected to PDA? So I am back to the beginning! Any Ideas?
Related
hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
xmrjx said:
hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
Click to expand...
Click to collapse
wrong forum, but ok.
does it happen when you plug in the wall charger (not a computer)?
shlomki said:
wrong forum, but ok.
does it happen when you plug in the wall charger (not a computer)?
Click to expand...
Click to collapse
Yes... sometimes it sticks 20 min before restarting, somtimes it restarts 10 times before getting on today screen....
Would you know how to fix this? and better: what caused this ?
xmrjx said:
Yes... sometimes it sticks 20 min before restarting, somtimes it restarts 10 times before getting on today screen....
Would you know how to fix this? and better: what caused this ?
Click to expand...
Click to collapse
Can you try a different battery ?
or at least take it out, clean the contacts and try again.
greetings,
Wout
wout said:
Can you try a different battery ?
or at least take it out, clean the contacts and try again.
greetings,
Wout
Click to expand...
Click to collapse
didn't work.....
i'm almost sure it is a software issue... I just got it back 2 weeks ago from the repair centre and i got all new hardware....
I started flashing it because the bastards repaired it and putted on a French ROM and an AZERTY keyboard.... i can send it back but i don't want to miss my precious phone another 6 weeks
if i get it fixed now, i stop "messing" with it ;-)
Hehe...
I sent it back to the repair shop. They can fix it since bootloader mode also restarts it must be a hardware problem...
Last time they sent it back with AZERTY and French ROM so they can fix that to!!
Thx anyway for replying!
Hi guys, I got a little problem here. I flashed my kaiser to hardspl and flashed duttys supafast rom. The problem is that now if I turn my phone off and then on again (by soft reset or hardware button (not hard reset)). The phone does not boot up, but instead goes into the boot loader, quickly flashes "no image found", goes back into boot loader and stays there. Then i have to pull out the battery and put it back in, leave the phone without turning it on for about 30mins then turn it on and it works fine then. Ive tried flashing other roms, radios and reflashing hardspl. But nothing seems to work. Does anyone have the solution ? I would be greatful ! Thanks in advance.
have u tried the thread regarding the mtty option?
where this thread?
try this out. it seems to have worked for a few people. or to make sure u could do a search for mtty bricked.
however, i dont think u are bricked. just take few breaths and do a search.
you will be fine. good luck.
nope did not help it still does the same thing...... any other ideas ?
same problem here http://forum.xda-developers.com/showthread.php?t=361045
soft reset with usb (also ear mic) plugged into is ok
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope is the solution...
StashCompInc said:
nope did not help it still does the same thing...... any other ideas ?
Click to expand...
Click to collapse
I don't know which command you tried with mtty?
Try the command:
task 28 55aa
not just the command:
task 28
Hope this helps!
KOR!
Solution found !, Just flashed super cid, and now the phone works like a charm !
I'm glad someone finally recognized and appreciates the value of that tool
Hello Guys, I've got a problem with my Polaris200. (XDA Orbit 2)
I already searched for the same issue on the polaris forums but didn't find someone who has the same problem.
Problem description:
5 days ago i flashed my XDA Orbit 2 back to the official O2-WinMobile-6.1-Firmware (GER). I had different cooked roms on it, M-Amine 2.0 was the last before this. Hard-SPL is installed of course.
At first everything was fine after flashing to o2-firmware but after a soft reset, the following happened: my phone is stuck at the o2-splashscreen, then restarts again and again every 20 secs. Maybe it helps that I can say that there is no status shown in lower-right side which usually appers ten seconds after soft-resetting the phone.
I already tried a hard reset via Bootloader Mode and a reflash of the same firmware, but the issue remains
Any suggestions what I could do?
Thank you in advance.
EDIT:
Finally I made a big mistake using mtty. The execution of task 2a erases the whole NAND... unfortunately my device isn't security unlocked so far, so that it seems to be bricked!
Do you really have no idea? Maybe there is a way using mtty.exe?
I think the main problem is, that the R+P+R (Radio+Protocol+Rom) isn't displayed at the splash-screen when booting.
Next problem is, that I can't use my guarantee because I can't reflash to original SPL due to the fact that I can't get an active sync connection because windows mobile 6.1 is not booting.
I could really need some help
wick3d337 said:
I could really need some help
Click to expand...
Click to collapse
Try the Recovery procedure. Remove the battery wait for at least three seconds, replace the battery. Flash again. Keep fingers crossed.
I did this before the "hard-brick" via task 2a...
I even removed the battery for 48 hours and replaced it... but same issue as before!
I m having 100% same problem. Tried installing different roms, even original orbit2 rom but nothing works. U r all requested to pls. Help me in this.
Thank u in advance.
Hey, you guys really need necessarily help. I tried that and it superboot clockworkmod.
At first it did not work, wrote it waiting on the device. Then I downloaded the USB drivers on something ... And it was ... so I did exactly as instructed. And android green doll disappeared, appeared white, and the inscription ANDROID always disappear for a split second and will come back ... Immediately after it should appear ZTE logo but it's probably still around trying to boot. And I'm so in the dead point, I can not do anything for several hours I read various forums, especially MoDaCo but all it is. I FastBoot, according to the instructions exactly and nothing. It boots all the time :-( Please help. I just want firmware back! Does anyone know how to do it?
Hi. Have you tried pushing that little button inside near the camera. I bricked mine once and this brought it back to life. Good Luck. Andrew
AMcK said:
Hi. Have you tried pushing that little button inside near the camera. I bricked mine once and this brought it back to life. Good Luck. Andrew
Click to expand...
Click to collapse
hi. thanks for the advice. near the camera button is not found. found at the bottom of the phone, but it has not helped. I do not know what to do? Thank you again. Joseph
Hey guys my htc 8x from att was getting am update
all was fine till it got to the updating part, i waited for 30 min and nothing
i turned it off
turn it back up
it goes to the update windows again
as show in the picture
what can i do
i can go to bootloader screen and the lightning screen
thats it
help please thanks
i tryed the hard reset but cant get there
no icon no nothing
please help
You are not alone!!! I just encountered this problem!!!
elmanortega said:
Hey guys my htc 8x from att was getting am update
all was fine till it got to the updating part, i waited for 30 min and nothing
i turned it off
turn it back up
it goes to the update windows again
as show in the picture
what can i do
i can go to bootloader screen and the lightning screen
thats it
help please thanks
i tryed the hard reset but cant get there
no icon no nothing
please help
Click to expand...
Click to collapse
foxuniform said:
You are not alone!!! I just encountered this problem!!!
Click to expand...
Click to collapse
Any solution found?