Hi guys, I got a little problem here. I flashed my kaiser to hardspl and flashed duttys supafast rom. The problem is that now if I turn my phone off and then on again (by soft reset or hardware button (not hard reset)). The phone does not boot up, but instead goes into the boot loader, quickly flashes "no image found", goes back into boot loader and stays there. Then i have to pull out the battery and put it back in, leave the phone without turning it on for about 30mins then turn it on and it works fine then. Ive tried flashing other roms, radios and reflashing hardspl. But nothing seems to work. Does anyone have the solution ? I would be greatful ! Thanks in advance.
have u tried the thread regarding the mtty option?
where this thread?
try this out. it seems to have worked for a few people. or to make sure u could do a search for mtty bricked.
however, i dont think u are bricked. just take few breaths and do a search.
you will be fine. good luck.
nope did not help it still does the same thing...... any other ideas ?
same problem here http://forum.xda-developers.com/showthread.php?t=361045
soft reset with usb (also ear mic) plugged into is ok
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope is the solution...
StashCompInc said:
nope did not help it still does the same thing...... any other ideas ?
Click to expand...
Click to collapse
I don't know which command you tried with mtty?
Try the command:
task 28 55aa
not just the command:
task 28
Hope this helps!
KOR!
Solution found !, Just flashed super cid, and now the phone works like a charm !
I'm glad someone finally recognized and appreciates the value of that tool
Related
Ok - So I have a mde very noobish error. I have in the past flashed my Kaise to a number of cooked ROMs but had recently just got hold a replacement handset from T-Mobile UK.
I was inteding to load Duttys new WM6.1 ROM and so ran JumpSPL from my phone but then proceeded to flash duttys ROm without flashing HardSPL first !!!
The ROM loaded but now my phone is stuck in the bootloader and whatever I do - I cant get by it or flash any other ROM or anything.
Whatever I try I either get Error 262 or 292 (I think) which is invalid Vendor Id. I have searched but cant find a solution.
Please help me !!!!
See the second post in this thread:
http://forum.xda-developers.com/showthread.php?t=369812
jockyw2001 said:
See the second post in this thread:
http://forum.xda-developers.com/showthread.php?t=369812
Click to expand...
Click to collapse
I have tried a hard reset (power + camera keys) but nothing - the phone still boots to the tri-color bootloader screen.
anything else I can do? I'm really starting to get worried...
mzaslam said:
I have tried a hard reset (power + camera keys) but nothing - the phone still boots to the tri-color bootloader screen.
anything else I can do? I'm really starting to get worried...
Click to expand...
Click to collapse
The key combination you are using is to enter Bootloader Mode.
Better read here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Mike
mikechannon said:
The key combination you are using is to enter Bootloader Mode.
Better read here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Mike
Click to expand...
Click to collapse
hi mike,
sorry - my bad.
Anyhow - I tried that and its STILL booting straight into the bootloader screen !!!
aaaarghh....
mzaslam said:
hi mike,
sorry - my bad.
Anyhow - I tried that and its STILL booting straight into the bootloader screen !!!
aaaarghh....
Click to expand...
Click to collapse
You should be able to install hardspl from that bootloader screen, I had to do it for a friend who bricked his kaiser in the same fasion.
Zoisite said:
You should be able to install hardspl from that bootloader screen, I had to do it for a friend who bricked his kaiser in the same fasion.
Click to expand...
Click to collapse
I did try that but didn't work. I will give it another go now and post back.
UPDATE: I cant get past the first bit where it needs the activesync connection enabled i.e. icon to be GREEN. This isnt gona happen coz I can't get the phone to boot.
what next? Its looking like I complectely messed my phone up...
anyone else have any ideas? I'm getting desperate here... hey I will even donate if I have to - just help me bring my phone back from the brink!
mzaslam said:
anyone else have any ideas? I'm getting desperate here... hey I will even donate if I have to - just help me bring my phone back from the brink!
Click to expand...
Click to collapse
I've given you a good advice, why don't you try it ?
jockyw2001 said:
I've given you a good advice, why don't you try it ?
Click to expand...
Click to collapse
hey jockyw2001
I have tried a hard reset but even after doing it - the phone STILL insists on booting into the tri-color bootloader screen.
I definitely was not ignoring your advice as you were the first person kind enough to respond with a possiblt solution to my problem. Unfortunately, didnt work.
Also, I have found that if I try to re-flash the original ROM I get an INvALID VENDOR ID message - obviously down to the fact I dont have HardSPL flashed. I cant flash HardSPL either.
Do you have any other ideas/suggestions I can try please?
UPDATE: Sorry, I think I was looking at the wrong post - what is MTTY and where can I get it please?
mzaslam said:
hey jockyw2001
I have tried a hard reset but even after doing it - the phone STILL insists on booting into the tri-color bootloader screen.
I definitely was not ignoring your advice as you were the first person kind enough to respond with a possiblt solution to my problem. Unfortunately, didnt work.
Also, I have found that if I try to re-flash the original ROM I get an INvALID VENDOR ID message - obviously down to the fact I dont have HardSPL flashed. I cant flash HardSPL either.
Do you have any other ideas/suggestions I can try please?
Click to expand...
Click to collapse
Have you actually read what I linked ?
Currently there are at least two other guys having the same problem. Please start reading the current threads.
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
sanguy888 said:
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
Click to expand...
Click to collapse
Try flashing in bootloader.
Hold down Power button + Camera Button + insert stylus into reset.
Flash away.
sanguy888 said:
When flashing a ROM on my 8925, I get to the point where it looks like it is about to load, but it stays at 0% and goes nowhere. I tried looking for a fix, but only found the White screen of death which is different from my problem.
Please HELP!
Thanks!
Click to expand...
Click to collapse
Do you see the upload meter on your PC or on both PC and Phone? If only on the PC, then you might not have the HardSPL flashed or installed, which you would need to do first before you can flash to a new ROM. If you see the load meter on both screens, phone and PC and it hangs, then do what Alltheway suggested.
I tried that too. I have no problem getting to where it is about to load. It just won't load and stays at 0%.
I get 0% on both PDA and PC.
sanguy888 said:
I get 0% on both PDA and PC.
Click to expand...
Click to collapse
OK... Turn off your Fire wall and pause your Anti Virus program until the program loads to 100%.
Once more... Did you install the HardSPL?
Go here first if you have not installed the CID unlocker ( HardSPL)
http://forum.xda-developers.com/showthread.php?t=334679
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.
sanguy888 said:
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress. I'll try stopping my antivirus to see if that fixes things. I also have an 8525 in which I'm able to flash ROMs with no problems on the same computer. I suspect it is something with my 8925.
Click to expand...
Click to collapse
No it is not... The Qualcom processor behaves differently than the Samsung. So the loading environment one processor accepts is not necessary a common denominator.
Disable your Firewall and your AntiVirus and start fresh. Please read the HardSPL ( CID Unlocking) procedure carefully.
Thanks for clarifying that asfoor! I'll give it a try.
OK, I deinstalled my virus protection and turned off my firewall and still I get up to the point that a ROM (even for hardSPL) is about to load and nothing happens.
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!
sanguy888 said:
I did a hard reset and it looks like it cleared the problem. I was able to flash the hardSPL...Thanks everyone!
Click to expand...
Click to collapse
You are on your way to become a ROM junkie .... like the rest of us... Congrats and glad to be of help.
sanguy888 said:
I tried loading HardSPL. I get the same problem when trying to load HardSPL. 0% progress.
Click to expand...
Click to collapse
I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?
same here..
0% and then i get a recovery message on my vista pc to eject my battery.
my95z34 said:
I have the same issue.. And none of that software is even installed on this machine. I've tried the hard reset too. Still nothing. Any ideas?
Click to expand...
Click to collapse
HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.
YLA G said:
same here..
0% and then i get a recovery message on my vista pc to eject my battery.
Click to expand...
Click to collapse
You definitely have a Anti-Virus program that is conflicting with the install. I would try the install on another machine, then see if you get the same issue.
asfoor said:
HardSPL is NOT the same as Hard Reset ! Please read the thread on Unlocking your CID.
Click to expand...
Click to collapse
... lol ... Yeah, I know. I know what I'm doing. Im not a rookie. I've been flashing phones for like 2 years now. I was saying that I've even hard reset'd the phone and tried on a fresh hard reset. To no avail.
*** i got my phone up and running. i am using a very old firmware from at and t from 12/07. however, fromt this point on, any other rom that i try to use is giving me a 302 error, both official and cooked roms except for the old one. can anyone shine some insight on this? thanks.
UPDATE on current problem:
1) i tried to update to a custom rom for the first time. it had worked. i used hard spl 3.29, then installed the natf v4 rom. the rom worked fine and everything. however, it was not to my liking.
2) maybe this was my stupidest mistake because i am a newbie. i tried to install an official rom right after. when i did this, the phone was stuck on 89%, and just freezes. and now i am stuck at the tri color screen (boot screen).
3) nothing i load is working. can someone please point me in the right direction in what im suppoose to do from here. i tried the sticky thread, but i am not having any luck. i need this to work asap. please help. thanks all is aprpeciated.
when i try to install the same natf rom, i get the error 262. it doesnt even go past 0%.
when i try to install the original oem rom, it goes to 89%, and stops and gives me a 309 error.
there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.
Travito said:
there's plenty of stickies and other topics around that have potential solutions, try those first, post back if nothing's working.
Click to expand...
Click to collapse
yes ih ave tried. the phone is not workign whatsoever. it wont pass the at and t screen that show the R, G, and D numbers. i can do hard reset, that doesnt work. it just stops. im still searching all over the forum right now. but i need the right solution because i need to get this phone to work ughh im sorry if i seem like im asking to much. please any help is appreciated thanks.
i also cant plug it in through usb. after it freezes that stops too so i cant load anything to update the phone.
What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.
cham1980 said:
What version of hardspl are you flashing? Maybe your rom do not support that. try to manually go to tri color screen and see if it connect to USB or not.
Click to expand...
Click to collapse
i beleive it was 3.29. how do i manually go into tri color screen? note i cant go pass the first screen
i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.
bknewtype said:
i am currently trying the sd card method to boot up with the kaidiag.nbh file. its not working. nothing boots up. its still freezing at the first screen.
Click to expand...
Click to collapse
is there anythign specific i have to do to boot up from the sd card? sorry for so many responses i am panicing and ihave to ge tthis phone to work before i go to work in the morning..
hold down the camera button (FULL press) and soft reset, try flashing again
Travito said:
hold down the camera button (FULL press) and soft reset, try flashing again
Click to expand...
Click to collapse
thanks. i jsut tried that. it booted up and isntalled update. it went to the tri color screen, then to the white loading screen, and now im stuck again...
ok it got pass the white loading screen. now im stuck at the good ol tri color screen. anything i was trying to load fromthis point foward is not working. evrtygyhing either is stuck on 0% or it jsut gives me an error to go to recovery mode. please help. i jsut want to revert bck to the oem rom if possible. i just need my phone up and running.
i am getting the error RUU 302. where would i go about this to do it from scratch? as i mentioned i so far have 3.29 hardspl installed
updated and explained problems in detail on first post.
have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...
The Reaper said:
have a look at this thread http://forum.xda-developers.com/showthread.php?t=423486 , it explains how to get out of the bootloader mode...hope it helps...
Click to expand...
Click to collapse
thanks for the response. i have been on that thread for about 2 hours now, but i still cant get it to work. if you can read my first post, i have updated to see my current situation. thanks.
OK which official ROM are you trying to install?
btstarcher said:
OK which official ROM are you trying to install?
Click to expand...
Click to collapse
the latest from the site. 3.57 i believe
I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?
btstarcher said:
I'm sorry, from which site? Is the filename RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe?
Click to expand...
Click to collapse
yup thats the one. it stops at 89% and gives me the 302 error
Dang dude I don't know.
Hello Guys, I've got a problem with my Polaris200. (XDA Orbit 2)
I already searched for the same issue on the polaris forums but didn't find someone who has the same problem.
Problem description:
5 days ago i flashed my XDA Orbit 2 back to the official O2-WinMobile-6.1-Firmware (GER). I had different cooked roms on it, M-Amine 2.0 was the last before this. Hard-SPL is installed of course.
At first everything was fine after flashing to o2-firmware but after a soft reset, the following happened: my phone is stuck at the o2-splashscreen, then restarts again and again every 20 secs. Maybe it helps that I can say that there is no status shown in lower-right side which usually appers ten seconds after soft-resetting the phone.
I already tried a hard reset via Bootloader Mode and a reflash of the same firmware, but the issue remains
Any suggestions what I could do?
Thank you in advance.
EDIT:
Finally I made a big mistake using mtty. The execution of task 2a erases the whole NAND... unfortunately my device isn't security unlocked so far, so that it seems to be bricked!
Do you really have no idea? Maybe there is a way using mtty.exe?
I think the main problem is, that the R+P+R (Radio+Protocol+Rom) isn't displayed at the splash-screen when booting.
Next problem is, that I can't use my guarantee because I can't reflash to original SPL due to the fact that I can't get an active sync connection because windows mobile 6.1 is not booting.
I could really need some help
wick3d337 said:
I could really need some help
Click to expand...
Click to collapse
Try the Recovery procedure. Remove the battery wait for at least three seconds, replace the battery. Flash again. Keep fingers crossed.
I did this before the "hard-brick" via task 2a...
I even removed the battery for 48 hours and replaced it... but same issue as before!
I m having 100% same problem. Tried installing different roms, even original orbit2 rom but nothing works. U r all requested to pls. Help me in this.
Thank u in advance.
Hi Lads,
My HTC touch diamond is doing strange, one day I woke up and suddenly it gave me a Red,Green,Blue,White screen. As I understood it's called bootlloader or something like that.
I tried reset+volumebutton after that it is starting normal and Ive got my phone back, but if I turn my phone back off its gaving me the terrible Red, Green, Blue, White screen back.
Ive tried to do a hard reset ( reset button + volume + round button) but then I have to press the volume button again to accept, but it isnt doing anything then.
Ive looked for some solutions but everything is chinese for me.
I just want my phone back to normal and I hope I dont have to loose all my files.
Can anyone help ?
Thanks anyway lads
Well, if possible, Backup all of your Data using either SPB Backup or Microsoft MyPhone, and reflash a new ROM.
This is what most users will tell you to do.
I think once a device encounters the Bootloader Infinite Loop issue, the only solution is to Flash a New ROM.
and how can I do that ? I am really a dummie at this point.
But it still works only if I put it back on I see the bootloader again.
jonaszw said:
and how can I do that ? I am really a dummie at this point.
But it still works only if I put it back on I see the bootloader again.
Click to expand...
Click to collapse
..better post in the diamond thread. I am sure you will get help!
Maybe HardSLP?
Any update on your progress?
Curious as to whether or not you got the issue fixed.
[If you can get into the Bootloader, you can Re-Flash your device.. just keep it plugged into your computer when you restart your device.]
check my sig for a n00b tutorial