Hi, I have been using the WM6.5 (with CHome+LockScreen) | IE6 (No Widgets) V4.6C on my HTC K-JAM for about a month now. Expect for the memory leak, I had no problem and I liked it very much. But today, when I tried to connect to my PC (running XP Professional) using ActiveSync 4.5 (for the first time) it is giving me the following error: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again". I tried resetting both phone and computer, reinstalled ActiveSync 4.5 and even tried using a different USB cable, still have the problem. What can I do ? Can I even flash my phone to another ROM ?
Hello mhmhafniyaas,
mhmhafniyaas said:
Hi, I have been using the WM6.5 (with CHome+LockScreen) | IE6 (No Widgets) V4.6C on my HTC K-JAM for about a month now. Expect for the memory leak, I had no problem and I liked it very much. But today, when I tried to connect to my PC (running XP Professional) using ActiveSync 4.5 (for the first time) it is giving me the following error: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again". I tried resetting both phone and computer, reinstalled ActiveSync 4.5 and even tried using a different USB cable, still have the problem. What can I do ? Can I even flash my phone to another ROM ?
Click to expand...
Click to collapse
yes... you can` flash your phone to another rom... in bootloader mode... if you need more help please contact me...
Kind Regards.
hi
I tried to synchronize my HTC HD having ROM Duttys HD WM6.5 R8 Turbo with Outlook, everything is going fine, untill I reach 'Calendar' sync, on this Activesync is stuck and I see in my calendar enlarging number of empty appointments. How it's possible ??
please help me.
thanks in advance.
Hello poleshuka...
poleshuka said:
hi
I tried to synchronize my HTC HD having ROM Duttys HD WM6.5 R8 Turbo with Outlook, everything is going fine, untill I reach 'Calendar' sync, on this Activesync is stuck and I see in my calendar enlarging number of empty appointments. How it's possible ??
please help me.
thanks in advance.
Click to expand...
Click to collapse
Sorry... but i don`t realy know... i never worked with a Blackstone aka HTC Touch HD...so i don`t know how to help you... but you can` flash in bootloader mode a new rom... if your phone is stuck... just get the battery out, put it back... and flash other rom throught bootloader mode ( 3 color screen)... if you don`t have enought battery than put the charger in and hold the power button about 10-15 seconds until it starts chargeing... anyway... hope this work`s on a Blackstone too... and next time be more carefull where you post...
Regards.
Related
Hi
My S200 after upgrade to WM6 can't load windows
Hang in the blue page (Qtek) before load windows
can i reloade WM5 on my 200? How?
this guy is my dear friend, he's got a G4 device, and has flashed the wrong wm6 rom on his device, and successfully broke it!
any solution/remedies would be extremely appreciated
Did you read all the instructions before flashing the device?
Try to get into the 3 color screen and reflash with an official ROM.
please help me simple, my english is very bad!
can i reload wm5?
try like this
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
bugmenot said:
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
Click to expand...
Click to collapse
my ipl and spl is 2.09.0001
if install this rom so upgrade that to WM6 have problem?
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
b-xenon said:
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
Click to expand...
Click to collapse
Reading it... your phone doesn't work anyway... so why bother?
do the upgrade!! ;-)
Thank's my friends
1st off I DID use the search button.... 2nd HELPPP ME!!!
Waaah :'( I have a most intriguing problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
same same... but i dropped mine before flashing the new PDAVIET touch rom.. still went fine..
now, it still flashes... RUU says its successful.. but PDA just reboots back to bootloader..
i can charge my phone fine in bootloader.. i can see the USB come on when i connect it to my computer.. other than that, can't do anything...
i've tried everything the past 2 days.. looks like i'll have to send it back to dopod.. will let u guys know what happens... probably something got damaged..
struck at bootloader
I tried WM6 (4.0.0.6 touch) from WM5 AKU 2.2 but it failed in between with some write message,which was bit strange as I didn't touch any key on laptop during that time and no program was being run at that time. (I am using VISTA Home premium). I got my phone into bootloader but it does not connect to my laptop...so cant upgrade back to AKU 2.2. In Windows Mobile Device Center, I cant see my device connected. So is it particular to Vista or my phone got bricked?
I am yet to try on Windows XP, which I have to arrange.
Please advise.
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
charliess said:
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
Click to expand...
Click to collapse
I tried the same but when I run ROMUpdateUtility_No_VenderID, I get a message 'Update Error, 260' which tells further that PDA is not connected to laptop., although it is very much connected. However LED on PDA does not blink as well.
When I plug in this phone to Wall adaptor, LED does show up.
'USB' appears at Bottom Left corner of PDA when connected to laptop and certainly its getting recognised by Vista as it starts installing Driver as soon as this is connected to laptop.
Please suggest.
I am stuck in the same situation, although I have a G3, running 2.20 on IPL & SPL
Working now
I tried on XP (I was trying on vista before)..I had to install Active Sync as it was not installed on that PC, then run RUU update for AKU 2.2 and update was successfull. Now will try Touch 4.0.0.6 again but this time on XP.
Hope this time I wont have any problems.
Hi there
I'm a noob to PDA things but I decided to upgrade my S200 to WM6 (that was NOT a good idea!)
After downloading this http://rs23l34.rapidshare.com/files/17953287/3266540/smart1_wm6_pp8mb.exe file I run the upgrade batch file BUT it was working for 50min so I unplugged the device. I probably should not do that!! ...because there are some problems: no ringtone for incoming calls, no digits to dial an outgoing call and many theme problems.
Now I'm not able to connect it to activesync (4.5) to do a downgrade because a message comes up that says "ActiveSync cannot connect to the WM device" and there's a network icon on the tray with limited connectivity. I did 3 hard resets by holding power + camera + comm manager buttons + reset and I've tried the trick with the camera button pressed while powering on and after connect it to USB but still nothing...
Can someone help??? I'd like to have WM6 installed but I really have to fix my phone even If I have to setup WM5 again.
Many thanks
Try to make a RUU downgrade in bootloader mode!
Way 1: Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
Way 2: To reinstall an another WM6 Rom you have to flash AKU2.2 and then you can try to install a different WM6 Rom! You can find AKU2.2 in the threads of the WM6 Roms. The name of the file is often ...TEMP.zip like in PDA Viet!
Happy flashing!
greetz Ben
Hardcore898 said:
Try to make a RUU downgrade in bootloader mode!
Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
greetz Ben
Click to expand...
Click to collapse
How I'll do that? There is no connection to activesync
Is there any way to flash from the memory card?
In active sync, disable connect through USB. Then enter bootloader (Camera button and soft reset), and then run the RUU. Your device should start properly now.
Great!!!!!!!! it worked!!!!!
Thanks a lot
No problem.
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Flashx4u said:
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Click to expand...
Click to collapse
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
The problem SOLVED!
ZRimaZ said:
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
Click to expand...
Click to collapse
So ,finally I found the solution with this issue and problem with my Prophet's restarting after it's registering to the cellular network (I wrote about it in another treeds as well).
After I tried to reflash my Prophet with different WM6 ROMs, different Radio ROMs, reassembled and cleaned it, reflashed to original WM5 ROM and nothing helped, I just came to an idee to replace the battery, unless Prophet indicated that still it's a lot of power (min 50%)...I ordered the battery and when I received it and replaced, everything is running as it should be!!!!
Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...