1st off I DID use the search button.... 2nd HELPPP ME!!!
Waaah :'( I have a most intriguing problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
same same... but i dropped mine before flashing the new PDAVIET touch rom.. still went fine..
now, it still flashes... RUU says its successful.. but PDA just reboots back to bootloader..
i can charge my phone fine in bootloader.. i can see the USB come on when i connect it to my computer.. other than that, can't do anything...
i've tried everything the past 2 days.. looks like i'll have to send it back to dopod.. will let u guys know what happens... probably something got damaged..
struck at bootloader
I tried WM6 (4.0.0.6 touch) from WM5 AKU 2.2 but it failed in between with some write message,which was bit strange as I didn't touch any key on laptop during that time and no program was being run at that time. (I am using VISTA Home premium). I got my phone into bootloader but it does not connect to my laptop...so cant upgrade back to AKU 2.2. In Windows Mobile Device Center, I cant see my device connected. So is it particular to Vista or my phone got bricked?
I am yet to try on Windows XP, which I have to arrange.
Please advise.
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
charliess said:
i had the sam problem.i installed this : try to install the 2.20 nvid rom
just go into bootloader mode-you dont need active sync connection and start the upgrade-search for 2.20 nvid rom download it and recover your device
Click to expand...
Click to collapse
I tried the same but when I run ROMUpdateUtility_No_VenderID, I get a message 'Update Error, 260' which tells further that PDA is not connected to laptop., although it is very much connected. However LED on PDA does not blink as well.
When I plug in this phone to Wall adaptor, LED does show up.
'USB' appears at Bottom Left corner of PDA when connected to laptop and certainly its getting recognised by Vista as it starts installing Driver as soon as this is connected to laptop.
Please suggest.
I am stuck in the same situation, although I have a G3, running 2.20 on IPL & SPL
Working now
I tried on XP (I was trying on vista before)..I had to install Active Sync as it was not installed on that PC, then run RUU update for AKU 2.2 and update was successfull. Now will try Touch 4.0.0.6 again but this time on XP.
Hope this time I wont have any problems.
Related
Hi,
I have tryed to upgrade my rom to a new version (Prophet WM5 AKU3.2 v3231). Followed the stept correctly, however my phone does not boot anymore. It gets stuck in the qtek logo (when it displays the AKU version i´ve got) and the sceen gets all shacky.
An addictional problem is because it is stuck at that point it does not connect to my computer....
What can I do to fix this, any good suggestions
Thank,
Sebastiaan
You should be able to enter bootloader mode by pressing and holding the camera button while you power on your phone. On the bottom left, you should then see "USB" - connect it to the PC and flash it again.
Had to do this yesterday after flashing failed.
Mike
thanks it worked
Sebastiaan
Error [296] Upgrade Only
Hello
I have same Trouble & I Make Bootloder from USB but Always I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Note: I try to Upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m
Now I trying to back to Old Software from I-mate
Also I try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but no Connection....
Please help me I with out Live (Phone)
I know it sounds strange but i used a different USB port and then it did connect. Now that everything is back to normal i can use the old one again.
maybe it works for you as well
I tried doing that, but for some reason my computer doen't recognize the device...pls help!
Guys
Im trying to update my C600 to the wm6 rom,
Ive unlocked (SuperCID) my phone, app unlocked as well. However when I try run TTP it comes up saying cannot connect followed by several other characters.
Im using a XP laptop nd have followed the instructions on the thread.
One other thing is that whenever I try run a ROM update official or unofficial Windows says that romupdateutility.exe is not responding...... and closes.
Ive tried doing a hardreset but still no joy
Please help!!!
thanks
Simon
after opening TTP are you selecting Serial and then USB from the drop down list??
ok.. make sure u r in bootloader mode and not in phone mode.
hold the camra key when the phone is off then plug in the usb cable
thanks guys
but yep definitley in bootloader mode and definitaly selecting usb coonection!
any other ideas?
I wonder if my phones got somethng wrong as i cant even install the official Orange Rom? even my phone works perfectly
Thanks
Si
oh.... r u using vista????
try updating the drivers!!! read the vista thred in the first post... that might help you
Well ive tried Vista nd Xp, I too have just read the Vista thread and downloaded the drivers
tried flashing again, PC rebooted at 20% One bricked C600
luckily its a corporate phone so will retry when I get my new one - lol
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
I ran the Hard-SPL on my HTC and it worked as it should. I'd say give that a shot, THEN try flashing the ROM of your choice.
-Mc
Problem is, when I run hard spl it expects activesync to be running, but in bootloader mode AS doesnt connect so Hardspl wont load =/
- Disable activesync usb connections
- Connect to bootloader with mtty and type the following commands to know your CID and Model ID:
Code:
Cmd>task 32
Cmd>info 2
Cmd>getdevinfo
Paste the output here, and also tell me which SPL version you have on your device.
Also, does the tri-color shows "RUURUN" or similar in the screen?
You should flash a ROM matching your CID to fix it.
Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSCWS__001Ùü¤HHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1*00CS_0HTCE
Cmd>
Device screen says
RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
Flash this ROM, should bring it back to life.
I'm leeching it now, 40% done, also FYI, I've posted on the Official ROM forum new links to most utilities and ROMs hosted on my servers off the rapidshare, to share free of charge.
Ahh, life saver =) Thanks, I'll be sure to add that rom to my list of full Kraiser roms on my web server, now to correctly flash it back with the HTC rom.
Thanks!
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Lukstra said:
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
Click to expand...
Click to collapse
ludovich said:
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
Click to expand...
Click to collapse
Run the Hard-SPL utility on your PC, and follow the instructions (sticky on this forum)
It will allow you to flash any ROM after that, I've flashed the AT&T Rom, the HTC rom and back and forth, pulling cabs out of the AT&T rom for the items I like (IM utility etc)
Palmore said:
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
Click to expand...
Click to collapse
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
andydempsey said:
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
Click to expand...
Click to collapse
LIFE SAFVER
nispen said:
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Click to expand...
Click to collapse
Hi Wouter,
I bought a new Kaiser today (yes now I have two of them ).
I will see if I can dump the Dutch ROM myself and see what happens next.
Thanks for your help anywhy!
- Lucas
Bricked
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Vista Problem.
First off, i had the same problem as you so i just found an XP box to use.
Second, even with XP i still managed to **** up because i did not read the directions all the way through. This device is totally different so make sure you read all the directions.
If you have no access to an XP machine then u can just "obtain" a copy of XP and dual boot just for flashing your device.
If you have no idea what I am saying then read some more. the hermes forums have some great information when it comes to flashing via Vista.
For all you guys that just saved between $300.00-$500.00. How about sending POF like %5 or %10 of what he just saved you...
I'm just sayin'
Later, Lew
Have you installed the XP activesync drivers under Vista? The Hermes Wiki mentions somewhere how to do that.
Jabbs19 said:
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Click to expand...
Click to collapse
Best Forum Ever
I
I got it working. I had to pull the battery out of the phone to get it out of bootloadr, it was just plain stuck. Then, in Vista, I needed to F8, disable driver enforcement, I replaced the wceusbh.inf in device manager, and relaunched HardSPL and there she was! Now for the BigStorage.
Thanks to all that helped, I will be donating pof for sure
Hi All,
Out of the blue my HTC Vox stopped booting. I mean, it would load to the windows mobile screen and then stay there till eternity. Removing my memory card and SIM also did not help! I then tried the hard reset option.
Even after hard reset it sometimes boots(1 out of 15 times) and when it does...it hangs after 10 to 12 minutes. Still have not put my sim n memory card into the phone.
I tries flashing the ROM using the ARA 1.27 ROM. After it rebooted to the bootloader, the flash utility gave a connection error! It did not connect to ActiveSync and stayed at the bootloader screen.
I still do not know how to flash it successfully.
If anybody can help me out, I'll be extremely grateful!
Thanks
Prateek
take the battery out, put it back.
connect your Vox (USB).
Hold the camera button and turn on your Vox.
you should see a red, blue and green screen (if my memory works as it should) and the computer should recognize the device, though you won't be able to explore it with activesync.
Run the SDA_ApplicationUnlock thingy (if you need to)
now try flashing the device.
If it flashes but after 3% restart, you need to do a CID unlock right before flashing.
hope that helps.
Invalid Vendor ID
Hi MoRkusReX,
Its giving me Invalid Vendor ID. How do I CID unlock it?
Thanks,
Prateek
http://forum.xda-developers.com/showthread.php?t=330909
first post , download the last file:
Vox USPL- CID BYPASS.zip
There a Readme file in there, you should read it.
post back where you're done.
No Luck!
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
Only once I have been able to boot into my OS and followed the instructions given in the link. The phone comes to the Linux black screen and then switchers off. Then the ROM Update Utility with which i'm trying to update the ROM gives an error that "cannot connect to the phone".
So, now I need to flash my ROM from the bootloader itself. Have managed to get mtty and connect to the phone. But even trying ResetDevice command, the phone does not boot.
Can you tell me the exact steps to flash a new ROM from the bootloader itself including CID unlocking? Can it be done??
Thanks,
Prateek
prateekswarup said:
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
...
including CID unlocking? Can it be done??
Thanks,
Prateek
Click to expand...
Click to collapse
yes it can be done.
you don't need to boot to OS, I couldn't either. after the steps from my first post here, run the uspl_116_jockyw.bat file. follow instructions.
that will unlock the CID.
Now the VOXs' screen should be white or so... then you run the ROM update thingy.
Hi..
I connected with the usb and got the bootloader screen.
tried running the SDA unlock program...the button to unlock the phone is grayed out. Cant click on it.
Next tried running uspl_116_jockyw.bat file
..cannot connect to phone and hence copy of haret.exe did not occur and neither did pmemtest run successfully...
What am I doing wrong??
ok..
first steps again..
battery out, back in.
connect USB
CAMERA button + Turn on.
now.. does windows do that USB sound? you know.. "tu du" ?
No sound....using win 2k Nt server edition...
but has detected my phone once on that USB and then allows me to talk to the phone using mtty....as in commands like ResetDevice work on the phone using mtty..
also, cannot get into bootlaoder mode with USB plugged in...
Steps and their results:
Disabled USB connections in activesync
Booted to the bootloader (red and green and Blue screen)
Connected the USB
"USB" displays on the left hand side corner
Now tried unlocking using Apllication unlock...grayed out button...
Tried running USPL bat but stops and says phone not connected when copying haret.exe
Using windows NT server 2003
if the SDA Application unlock button is grayed, of course the USPL won't work.
why "Disabled USB connections in activesync"?
And.. I doubt this is the problem but you should check on an winXP pc, I did it on XP.
No Luck!
Tried the same with USB enabled...same result
basically the thing we need to figure out is why your computer doesn't recognize the device.
the rest is obvious.
when I go to bootloader on my device windows pops up with a message says windows found device "and it's ready to use". like when you cannot every other USB item.
have you tried doing that on an XP system?
Going to do that now....lets hope it works....
Does ur activesync turn green when u connect at bootloader?
Also, I have removed my sim and memory card...thats okay right?
yeah, I removed both of them.
and no, activesync didn't turn green, but Windows recognized the device when I turned it on. turn on the speakers and wait for that winxp "USB connected" sound.
Still No Luck!
Tried doing the same on win xp...
no luck...
it connects to win xp ans says new device found...and ur USB device is now
ready to use...
after that i try application unlock it still gives me grayed out button....
ne suggestions???
Finally....
Finally got it done...
Thanks for all the help....
I managed to cold boot into the system for one time ans then SDA unlocked it and then ran UPSL .... it ran and then balnked out...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
then i flashed it with the ARA rom...
Seems to be working okay now..will test for a day and see...
thanks a lot
prateek
prateekswarup said:
Finally got it done...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
prateek
Click to expand...
Click to collapse
I'm not sure this step was necessary but as long as it worked.. good times.
btw, how did you boot into the system?
kept trying hard reset and repeated booting...( it was booting 1 in 15 times type...)..and one lucky time it didnt hang..so used that window to slip in the SDA unlock and USPL..
thanks ...
you're welcome.
I have an ex-Vodafone, sim unlocked HTC touch diamond and it won't turn on. All I can do is bring it into the tri-colour screen/bootloader. When plugged into my computer the phone screen goes from serial to usb, but thats as far as it gets. Communication with activesync is no longer possible. I have no idea what to try now, I've gone as far as my non-technical mind will go ! help
I'm in the UK. Phone info;
Duttys V2.7 RC2 WWE - 27/10/08
Radio 1.08.25.08
P3700
Bootloader screen reads;
DIAM 100 MFG 64M
SPL 1.40 Olinex
MicroP- Diam (LED) v11
PSOC - Diam STAGE_PVT v0x30
Welcome to forums
Please have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
You´ll find all needed to do a succesfull reflash.
Good luck,
no comms with activesync
thanks for the link. have read the info on flashing my device but my phone no longer communicates with activesync. Is it bricked ? Phone won't go beyond initial 'vodafone' startup screen. i don't know what to do now.
which os in computer do you use ??? if in tri-color boot loader, pc only recognized the HTC driver device, but Activesync won't show the connect. You understand what i mean? Go Flash yourself your device with successfully, I will pretty sure that your device doesn't brick.
yes correct you can run the RUU wrapper while the phone is in the boot loader and itll still flash the rom
i use windows xp home sp2, i don't understand the flash process and can't get further than the tri-colour screen. I think i need a very simple step by step walkthrough if I'm to get any further !
ok
down load the rom of your choice and exract it
in the folder there should be a file called ruu_signed.nbh and a exe file called RUU wrapper or something like that if it doesnt come with the RUU wrapper it should be able to be downloaded from a stickied thread at the top of the diamond rom forum
then u need to connect ur phone to the pc while its in the boot screen the click on the ruu wrapper in the file on the pc and it should install on ur phone
hi, i downloaded the ruu, then connect my phone in boot screen, start the install, it asks me to make an activesync connection. activesync no longer finds my phone so no connection is made. i got this close, what now ? thanks for the help !
Done it finally
after many dime bar moments and weeks of annoyance the touch diamond finally came back to life. expecting this phone to actually work as advertised turned out to be a bridge too far. cheers for the help.