Hi
My S200 after upgrade to WM6 can't load windows
Hang in the blue page (Qtek) before load windows
can i reloade WM5 on my 200? How?
this guy is my dear friend, he's got a G4 device, and has flashed the wrong wm6 rom on his device, and successfully broke it!
any solution/remedies would be extremely appreciated
Did you read all the instructions before flashing the device?
Try to get into the 3 color screen and reflash with an official ROM.
please help me simple, my english is very bad!
can i reload wm5?
try like this
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
bugmenot said:
like mccune said above
1 Turn phone off
2 Press and hold camera button
3 Connect phone with USB
4 Run (on PC) official update to WM2005. (I used "Prophet_Orange_UK_ROM.zip" from the FTP).
Click to expand...
Click to collapse
my ipl and spl is 2.09.0001
if install this rom so upgrade that to WM6 have problem?
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
b-xenon said:
when connect PPC with USB in three colors screen active sync not activate, my S200 work after install wm5 ROM in this mood?
Click to expand...
Click to collapse
Reading it... your phone doesn't work anyway... so why bother?
do the upgrade!! ;-)
Thank's my friends
Related
Hello,
My S200 doesn't work. Why?
Because:
1-I had a version of OS - 2.13.9.26 (versao em Portugues)
2-I update for AKU 3.2 ( PDAMobiz_Prophet_WM5AKU3.2_v3231)
3-Tried to unlock ( lokiwiz03a)
4-S200 doesn't work well, didn't receive calls (only rings when I choose Start> Phone), it was impossible saw the contacts, etc. So I tried install AKU 2.3 (2006-11-12_Prophet_WM5AKU2.3_lvsw_edition);
5-The instalation was longer than 30 min, so I restarted.
Now, the phone doesn't start the OS. Stay on "bios" stage:
IPL - 2.09.0001
SPL - 2.13.0001
GSM- 02.30.21
OS - 2.15.13.27
I just tried:
-(2 buttons + restart + Dial button) - for factory default
-restart
What I do now? It's impossible to install another ROM...
Thaks in advance.
JoDiz from Portugal.
-go into bootloader mode (hold camera button and press reset)
-upgrade to the latest Dopod ROM ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip (you MUST do this before upgrading to AKU 2.3 or 3.2)
-upgrade to AKU 2.3 or 3.2
2.3 is more stable... but 3.2 has more features
Impossible
Hi,
But it's impossible install other ROM. I can't connect S200 with PC by ActiveSync. I had try all the combinations that I knew to restart, but... nothing.
I think that when I did the first Update, to version 3.2, I didn't make the HARD RESET, I madden a normal reset. And I think, that these is the reason for the message: "ActiveSync can't syncronized with your device, please free memory, or restart your device".
How I do for connect the device to my PC? If I don't connect my device with PC it's impossible install anything.
Thanks,
Best Regards.
while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work
csjneek said:
while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work
Click to expand...
Click to collapse
Yes, u don't need activesync as long as the USB is detected when you plug it into the device.
thank u
i had the same problem on my g4 i-mate jamin with the 2.13 rom
thank u
It works
Hi, it works.
Thanks for the help.
Hi there
I'm a noob to PDA things but I decided to upgrade my S200 to WM6 (that was NOT a good idea!)
After downloading this http://rs23l34.rapidshare.com/files/17953287/3266540/smart1_wm6_pp8mb.exe file I run the upgrade batch file BUT it was working for 50min so I unplugged the device. I probably should not do that!! ...because there are some problems: no ringtone for incoming calls, no digits to dial an outgoing call and many theme problems.
Now I'm not able to connect it to activesync (4.5) to do a downgrade because a message comes up that says "ActiveSync cannot connect to the WM device" and there's a network icon on the tray with limited connectivity. I did 3 hard resets by holding power + camera + comm manager buttons + reset and I've tried the trick with the camera button pressed while powering on and after connect it to USB but still nothing...
Can someone help??? I'd like to have WM6 installed but I really have to fix my phone even If I have to setup WM5 again.
Many thanks
Try to make a RUU downgrade in bootloader mode!
Way 1: Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
Way 2: To reinstall an another WM6 Rom you have to flash AKU2.2 and then you can try to install a different WM6 Rom! You can find AKU2.2 in the threads of the WM6 Roms. The name of the file is often ...TEMP.zip like in PDA Viet!
Happy flashing!
greetz Ben
Hardcore898 said:
Try to make a RUU downgrade in bootloader mode!
Download the ROM from the 02 homepage and after 15 min you have a fully useable WM5 device!
greetz Ben
Click to expand...
Click to collapse
How I'll do that? There is no connection to activesync
Is there any way to flash from the memory card?
In active sync, disable connect through USB. Then enter bootloader (Camera button and soft reset), and then run the RUU. Your device should start properly now.
Great!!!!!!!! it worked!!!!!
Thanks a lot
No problem.
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Flashx4u said:
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Click to expand...
Click to collapse
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
The problem SOLVED!
ZRimaZ said:
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
Click to expand...
Click to collapse
So ,finally I found the solution with this issue and problem with my Prophet's restarting after it's registering to the cellular network (I wrote about it in another treeds as well).
After I tried to reflash my Prophet with different WM6 ROMs, different Radio ROMs, reassembled and cleaned it, reflashed to original WM5 ROM and nothing helped, I just came to an idee to replace the battery, unless Prophet indicated that still it's a lot of power (min 50%)...I ordered the battery and when I received it and replaced, everything is running as it should be!!!!
I've XDA neo ,and it's Rom version is old and german one , I want to update using AKU 3.3.13
I start it , but it lasted more than 40 minutes without any result , so I disconnect the pda , and restarted it ,but it stopeed at O2 screen ,the first screen at all ,where typed :
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
I don't know what to do now ,plz help me to solve this problem
many thanx for ur reading my ask
What ROM (the update) where you trying to isntall? Was it an official one, or a cooked ROM?
Try to enter bootloader (the three colour screen) bu pressing and holding the com manager button and performing a soft reset.
If this works, download the latest version of active sync and install it, and once that has completed, restart your computer.
Download a WM5 NVID (No Vendor ID) ROM from here and unpack/unzip it into the root of a harddrive (i.e.: C:\WM5ROM\).
Now, put the device in bootloader mode, and within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB) and plug the device into the computer.
Now run the RUU from the WM5 ROM you downloaded earlier.
Your device should now work.
Many Thaaaaaaaaaaanx
At Last i've got my pda again
it worked very well,thank you very much for your help
by the way , the link for the rom which u've put in ur reply doesn't work but i get the oficial rom 2005 from another website and applied ur steps and everything is going ok
thank you very much
No problem.
The reason the link didn't work is because the FTP server doesn't allow direct access. You learn something new everyday.
Hi, I have been using the WM6.5 (with CHome+LockScreen) | IE6 (No Widgets) V4.6C on my HTC K-JAM for about a month now. Expect for the memory leak, I had no problem and I liked it very much. But today, when I tried to connect to my PC (running XP Professional) using ActiveSync 4.5 (for the first time) it is giving me the following error: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again". I tried resetting both phone and computer, reinstalled ActiveSync 4.5 and even tried using a different USB cable, still have the problem. What can I do ? Can I even flash my phone to another ROM ?
Hello mhmhafniyaas,
mhmhafniyaas said:
Hi, I have been using the WM6.5 (with CHome+LockScreen) | IE6 (No Widgets) V4.6C on my HTC K-JAM for about a month now. Expect for the memory leak, I had no problem and I liked it very much. But today, when I tried to connect to my PC (running XP Professional) using ActiveSync 4.5 (for the first time) it is giving me the following error: "Critical communication services have failed to start. Try resetting the mobile device, and then connect again". I tried resetting both phone and computer, reinstalled ActiveSync 4.5 and even tried using a different USB cable, still have the problem. What can I do ? Can I even flash my phone to another ROM ?
Click to expand...
Click to collapse
yes... you can` flash your phone to another rom... in bootloader mode... if you need more help please contact me...
Kind Regards.
hi
I tried to synchronize my HTC HD having ROM Duttys HD WM6.5 R8 Turbo with Outlook, everything is going fine, untill I reach 'Calendar' sync, on this Activesync is stuck and I see in my calendar enlarging number of empty appointments. How it's possible ??
please help me.
thanks in advance.
Hello poleshuka...
poleshuka said:
hi
I tried to synchronize my HTC HD having ROM Duttys HD WM6.5 R8 Turbo with Outlook, everything is going fine, untill I reach 'Calendar' sync, on this Activesync is stuck and I see in my calendar enlarging number of empty appointments. How it's possible ??
please help me.
thanks in advance.
Click to expand...
Click to collapse
Sorry... but i don`t realy know... i never worked with a Blackstone aka HTC Touch HD...so i don`t know how to help you... but you can` flash in bootloader mode a new rom... if your phone is stuck... just get the battery out, put it back... and flash other rom throught bootloader mode ( 3 color screen)... if you don`t have enought battery than put the charger in and hold the power button about 10-15 seconds until it starts chargeing... anyway... hope this work`s on a Blackstone too... and next time be more carefull where you post...
Regards.